SP485REP-L vs SP485E तुलना

विस्तृत दोनों ओर की तुलना SP485REP-L द्वारा Exar Corporation और SP485E द्वारा MaxLinear. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Exar Corporation
SP485REP-L SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L ✓ सक्रिय

विशेषता तुलना

पैरामीटर SP485REP-L SP485E
ब्रांड Exar Corporation MaxLinear
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Half-duplex RS-485/RS-422 transceiver —
Receiver Unit Load 1/10 unit load —
Supported Transceivers per Line More than 400 transceivers —
Receiver Input Impedance 150 kOhm typical 12 kΩ minimum, 15 kΩ typical
Supply Voltage Range 4.75 V to 5.25 V —
Propagation Delay 60 ns —
Minimum Operating Temperature -40 C —
Maximum Operating Temperature +85 C —
Duplex Configuration Half-duplex —
Supported Standards RS-485 and RS-422 —
पैकेज 8-pin plastic DIP 8-pin NSOIC or PDIP
माउंटिंग प्रकार Through-hole Surface Mount (NSOIC) or Through-Hole (PDIP)
Driver Configuration 1/1 differential driver —
RoHS स्थिति [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
फ़ंक्शन — Transceiver
Protocol — RS-485, RS-422
Number of Drivers/Receivers — 1/1
Duplex — Half-duplex
डेटा दर — 2.5 Mbps (max, SP485E non-slew-limited)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Receiver Input Sensitivity — ±200 mV
Common-Mode Range — −7 V to +12 V
ESD Protection (HBM) — ±15 kV
ESD Protection (IEC 61000-4-2 Air Discharge) — ±15 kV
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature]
Process Technology — BiCMOS
Failsafe Receiver — Yes (open, shorted, idle bus)
Tri-State Enable Pins — Yes (DE, RE)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध