SP485REP-L vs SP485E So sánh

So sánh chi tiết song song của SP485REP-L bằng Exar Corporation và SP485E bằng MaxLinear. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Exar Corporation
SP485REP-L SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP485REP-L SP485E
Thương hiệu Exar Corporation MaxLinear
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-485/RS-422 transceiver —
Receiver Unit Load 1/10 unit load —
Supported Transceivers per Line More than 400 transceivers —
Receiver Input Impedance 150 kOhm typical 12 kΩ minimum, 15 kΩ typical
Supply Voltage Range 4.75 V to 5.25 V —
Propagation Delay 60 ns —
Minimum Operating Temperature -40 C —
Maximum Operating Temperature +85 C —
Duplex Configuration Half-duplex —
Supported Standards RS-485 and RS-422 —
Hộp 8-pin plastic DIP 8-pin NSOIC or PDIP
Kiểu lắp đặt Through-hole Surface Mount (NSOIC) or Through-Hole (PDIP)
Driver Configuration 1/1 differential driver —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Chức năng — Transceiver
Protocol — RS-485, RS-422
Number of Drivers/Receivers — 1/1
Duplex — Half-duplex
Tốc độ dữ liệu — 2.5 Mbps (max, SP485E non-slew-limited)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Receiver Input Sensitivity — ±200 mV
Common-Mode Range — −7 V to +12 V
ESD Protection (HBM) — ±15 kV
ESD Protection (IEC 61000-4-2 Air Discharge) — ±15 kV
Khoảng nhiệt độ hoạt động — [DATA_NEEDED: operating temperature]
Process Technology — BiCMOS
Failsafe Receiver — Yes (open, shorted, idle bus)
Tri-State Enable Pins — Yes (DE, RE)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá