SP485REP-L vs SP485E Perbandingan

Perbandingan bersamaan detil SP485REP-L dari Exar Corporation dan SP485E dari MaxLinear. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.

Exar Corporation
SP485REP-L SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L ✓ Aktif

Perbandingan Spesifikasi

Parameter Umum SP485REP-L SP485E
Merek Exar Corporation MaxLinear
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type Half-duplex RS-485/RS-422 transceiver —
Receiver Unit Load 1/10 unit load —
Supported Transceivers per Line More than 400 transceivers —
Receiver Input Impedance 150 kOhm typical 12 kΩ minimum, 15 kΩ typical
Supply Voltage Range 4.75 V to 5.25 V —
Propagation Delay 60 ns —
Minimum Operating Temperature -40 C —
Maximum Operating Temperature +85 C —
Duplex Configuration Half-duplex —
Supported Standards RS-485 and RS-422 —
Paket 8-pin plastic DIP 8-pin NSOIC or PDIP
Tipe Mounting Through-hole Surface Mount (NSOIC) or Through-Hole (PDIP)
Driver Configuration 1/1 differential driver —
Status RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Lead-Free Status [DATA_NEEDED: lead-free status] —
Fungsi — Transceiver
Protocol — RS-485, RS-422
Number of Drivers/Receivers — 1/1
Duplex — Half-duplex
Laju Data — 2.5 Mbps (max, SP485E non-slew-limited)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Receiver Input Sensitivity — ±200 mV
Common-Mode Range — −7 V to +12 V
ESD Protection (HBM) — ±15 kV
ESD Protection (IEC 61000-4-2 Air Discharge) — ±15 kV
Rentang Suhu Kerja — [DATA_NEEDED: operating temperature]
Process Technology — BiCMOS
Failsafe Receiver — Yes (open, shorted, idle bus)
Tri-State Enable Pins — Yes (DE, RE)

Spek dan Sumber

Buka Semua Produk Buat BOM Ajukan Diskon