THS1230CDWRG4 vs THS1230CDWG4 तुलना
विस्तृत दोनों ओर की तुलना THS1230CDWRG4 द्वारा Texas Instruments और THS1230CDWG4 द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
THS1230CDWRG4 - 12-Bit 30 MSPS Low-Power ADC | Texas Instruments
THS1230CDWRG4 ✓ सक्रियTexas Instruments
THS1230CDWG4 - 12-Bit 30MSPS Low-Power ADC | Texas Instruments
THS1230CDWG4 ✓ सक्रियविशेषता तुलना
| पैरामीटर | THS1230CDWRG4 | THS1230CDWG4 |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | ADC/DAC | ADC/DAC |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| रेज़ोल्यूशन | 12 bits | 12 bits |
| Sample Rate | 30 MSPS | — |
| Number of Inputs | 1 (single channel, configurable) | — |
| Input Configuration | Single-ended, single-ended w/ offset, differential | — |
| Analog Input Range | -2 V to +2 V | — |
| सप्लाई वोल्टेज | 3.3 V (single supply) | — |
| सप्लाई करंट | [DATA_NEEDED: typical supply current in mA] | — |
| Power-Down Mode | Yes | — |
| Output Interface | Parallel CMOS | — |
| ADC Architecture | Pipelined | — |
| ऑपरेटिंग तापमान | -40 C to +85 C | — |
| पैकेज | 28-SOIC (DW), 0.295 inch (7.50 mm) width | — |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| MSL स्तर | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS स्थिति | Compliant | — |
| Sampling Rate (Max) | — | 30 MSPS |
| Number of Channels | — | 1 |
| Conversion Time (Max) | — | 0.033 us (approx. 33 ns) |
| Architecture | — | Pipelined, multi-stage |
| Data Interface | — | Parallel CMOS |
| Analog Input Configuration | — | Differential or single-ended |
| Nominal Supply Voltage | — | 3.3 V |
| Power-Down Feature | — | Yes (dedicated PD pin) |
| ऑपरेटिंग तापमान रेंज | — | 0C to +70C |
| पैकेज / केस | — | 28-SOIC (DW), 0.295" / 7.50 mm width |
| Lead-Free / RoHS | — | Yes (G4 green finish, RoHS compliant) |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL in LSB] |
| Signal-to-Noise Ratio (SNR) | — | [DATA_NEEDED: SNR dBFS at fin and Fs] |