THS1230CDWRG4 vs THS1230CDWG4 Perbandingan
Perbandingan bersamaan detil THS1230CDWRG4 dari Texas Instruments dan THS1230CDWG4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
THS1230CDWRG4 - 12-Bit 30 MSPS Low-Power ADC | Texas Instruments
THS1230CDWRG4 ✓ AktifTexas Instruments
THS1230CDWG4 - 12-Bit 30MSPS Low-Power ADC | Texas Instruments
THS1230CDWG4 ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | THS1230CDWRG4 | THS1230CDWG4 |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | ADC/DAC | ADC/DAC |
| Status Lingkungan Hidup | Aktif | Aktif |
| Resolusi | 12 bits | 12 bits |
| Sample Rate | 30 MSPS | — |
| Number of Inputs | 1 (single channel, configurable) | — |
| Input Configuration | Single-ended, single-ended w/ offset, differential | — |
| Analog Input Range | -2 V to +2 V | — |
| Tegangan Pemuat | 3.3 V (single supply) | — |
| Arus Pemuat | [DATA_NEEDED: typical supply current in mA] | — |
| Power-Down Mode | Yes | — |
| Output Interface | Parallel CMOS | — |
| ADC Architecture | Pipelined | — |
| Suhu Kerja | -40 C to +85 C | — |
| Paket | 28-SOIC (DW), 0.295 inch (7.50 mm) width | — |
| Tipe Mounting | Surface Mount | Surface Mount |
| Level MSL | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| Status RoHS | Compliant | — |
| Sampling Rate (Max) | — | 30 MSPS |
| Number of Channels | — | 1 |
| Conversion Time (Max) | — | 0.033 us (approx. 33 ns) |
| Architecture | — | Pipelined, multi-stage |
| Data Interface | — | Parallel CMOS |
| Analog Input Configuration | — | Differential or single-ended |
| Nominal Supply Voltage | — | 3.3 V |
| Power-Down Feature | — | Yes (dedicated PD pin) |
| Rentang Suhu Kerja | — | 0C to +70C |
| Paket / Case | — | 28-SOIC (DW), 0.295" / 7.50 mm width |
| Lead-Free / RoHS | — | Yes (G4 green finish, RoHS compliant) |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL in LSB] |
| Signal-to-Noise Ratio (SNR) | — | [DATA_NEEDED: SNR dBFS at fin and Fs] |