THS1230CDWRG4 vs THS1230CDWG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma THS1230CDWRG4 tarafından Texas Instruments ve THS1230CDWG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
THS1230CDWRG4 - 12-Bit 30 MSPS Low-Power ADC | Texas Instruments
THS1230CDWRG4 ✓ AktifTexas Instruments
THS1230CDWG4 - 12-Bit 30MSPS Low-Power ADC | Texas Instruments
THS1230CDWG4 ✓ AktifÖzellik Karşılaştırması
| Parametre | THS1230CDWRG4 | THS1230CDWG4 |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | ADC/DAC | ADC/DAC |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Çözünürlük | 12 bits | 12 bits |
| Sample Rate | 30 MSPS | — |
| Number of Inputs | 1 (single channel, configurable) | — |
| Input Configuration | Single-ended, single-ended w/ offset, differential | — |
| Analog Input Range | -2 V to +2 V | — |
| Besleme Gerilimi | 3.3 V (single supply) | — |
| Besleme Akımı | [DATA_NEEDED: typical supply current in mA] | — |
| Power-Down Mode | Yes | — |
| Output Interface | Parallel CMOS | — |
| ADC Architecture | Pipelined | — |
| İşletim Sıcaklığı | -40 C to +85 C | — |
| Paket | 28-SOIC (DW), 0.295 inch (7.50 mm) width | — |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL moisture sensitivity level] | [DATA_NEEDED: MSL moisture sensitivity level] |
| RoHS Durumu | Compliant | — |
| Sampling Rate (Max) | — | 30 MSPS |
| Number of Channels | — | 1 |
| Conversion Time (Max) | — | 0.033 us (approx. 33 ns) |
| Architecture | — | Pipelined, multi-stage |
| Data Interface | — | Parallel CMOS |
| Analog Input Configuration | — | Differential or single-ended |
| Nominal Supply Voltage | — | 3.3 V |
| Power-Down Feature | — | Yes (dedicated PD pin) |
| İşletim Sıcaklığı Aralığı | — | 0C to +70C |
| Paket / Kas | — | 28-SOIC (DW), 0.295" / 7.50 mm width |
| Lead-Free / RoHS | — | Yes (G4 green finish, RoHS compliant) |
| Differential Nonlinearity (DNL) | — | [DATA_NEEDED: DNL in LSB] |
| Signal-to-Noise Ratio (SNR) | — | [DATA_NEEDED: SNR dBFS at fin and Fs] |