THS4140ID vs THS4141ID तुलना
विस्तृत दोनों ओर की तुलना THS4140ID द्वारा Texas Instruments और THS4141ID द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
THS4141ID - 160MHz Fully Differential Amplifier | Texas Instruments
THS4141ID ✓ सक्रियविशेषता तुलना
| पैरामीटर | THS4140ID | THS4141ID |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Product Type | Fully differential input/output amplifier | — |
| Amplifier Type | 1 circuit differential amplifier | Fully differential input/differential output amplifier |
| Differential Gain Bandwidth | 160 MHz -3 dB bandwidth | — |
| Slew Rate | 450 V/us | 450 V/us |
| Shutdown Function | Yes | — |
| Primary Application | Single-ended-to-differential conversion | — |
| ADC Driver Capability | Differential ADC driver | — |
| Third-Harmonic Distortion | -79 dB | -79 dB at 1 MHz |
| Supply Voltage Range | +/-16.5 V / 33 V | — |
| Typical Supply Current | 13.2 mA | — |
| Input Bias Current | 15 uA | — |
| Maximum Positive Input Voltage | 0.7 V below positive supply | — |
| ऑपरेटिंग तापमान रेंज | -40C to +85C | -40 °C to +85 °C |
| पैकेज | 8-pin SOIC | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| लाइफसाइकिल स्थिति | Active | — |
| Number of Circuits | — | 1 circuit |
| -3 dB Bandwidth | — | 160 MHz at ±15 V |
| Input-Referred Noise | — | 6.5 nV/Hz |
| Input Offset Voltage | — | 7 mV |
| Gain Tolerance | — | 1 dB |
| Common-Mode Noise Rejection | — | Balanced outputs reject common-mode noise |
| Supply Condition for Bandwidth | — | ±15 V |
| Process Technology | — | Complementary bipolar BiComI process |
| Signal-Path Architecture | — | True differential input-to-differential output |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |