THS4140ID vs THS4141ID موازنہ
تفصیلی ساتھ ساتھ موازنہ از THS4140ID بذریعہ Texas Instruments اور THS4141ID بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
Texas Instruments
THS4141ID - 160MHz Fully Differential Amplifier | Texas Instruments
THS4141ID ✓ فعالخصوصیات کا موازنہ
| پیرامیٹر | THS4140ID | THS4141ID |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Amplifier ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Product Type | Fully differential input/output amplifier | — |
| Amplifier Type | 1 circuit differential amplifier | Fully differential input/differential output amplifier |
| Differential Gain Bandwidth | 160 MHz -3 dB bandwidth | — |
| Slew Rate | 450 V/us | 450 V/us |
| Shutdown Function | Yes | — |
| Primary Application | Single-ended-to-differential conversion | — |
| ADC Driver Capability | Differential ADC driver | — |
| Third-Harmonic Distortion | -79 dB | -79 dB at 1 MHz |
| Supply Voltage Range | +/-16.5 V / 33 V | — |
| Typical Supply Current | 13.2 mA | — |
| Input Bias Current | 15 uA | — |
| Maximum Positive Input Voltage | 0.7 V below positive supply | — |
| آپریٹنگ درجہ حرارت رینج | -40C to +85C | -40 °C to +85 °C |
| پیکیج | 8-pin SOIC | 8-pin SOIC |
| ماؤنٹنگ ٹائپ | Surface mount | Surface mount |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| لائف سائیکل کی حالت | Active | — |
| Number of Circuits | — | 1 circuit |
| -3 dB Bandwidth | — | 160 MHz at ±15 V |
| Input-Referred Noise | — | 6.5 nV/Hz |
| Input Offset Voltage | — | 7 mV |
| Gain Tolerance | — | 1 dB |
| Common-Mode Noise Rejection | — | Balanced outputs reject common-mode noise |
| Supply Condition for Bandwidth | — | ±15 V |
| Process Technology | — | Complementary bipolar BiComI process |
| Signal-Path Architecture | — | True differential input-to-differential output |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |