THS4140ID vs THS4141ID So sánh
So sánh chi tiết song song của THS4140ID bằng Texas Instruments và THS4141ID bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
THS4140ID - 160MHz Differential Amplifier | Texas Instruments
THS4140ID ✓ Hoạt độngTexas Instruments
THS4141ID - 160MHz Fully Differential Amplifier | Texas Instruments
THS4141ID ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | THS4140ID | THS4141ID |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Fully differential input/output amplifier | — |
| Amplifier Type | 1 circuit differential amplifier | Fully differential input/differential output amplifier |
| Differential Gain Bandwidth | 160 MHz -3 dB bandwidth | — |
| Slew Rate | 450 V/us | 450 V/us |
| Shutdown Function | Yes | — |
| Primary Application | Single-ended-to-differential conversion | — |
| ADC Driver Capability | Differential ADC driver | — |
| Third-Harmonic Distortion | -79 dB | -79 dB at 1 MHz |
| Supply Voltage Range | +/-16.5 V / 33 V | — |
| Typical Supply Current | 13.2 mA | — |
| Input Bias Current | 15 uA | — |
| Maximum Positive Input Voltage | 0.7 V below positive supply | — |
| Khoảng nhiệt độ hoạt động | -40C to +85C | -40 °C to +85 °C |
| Hộp | 8-pin SOIC | 8-pin SOIC |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Trạng thái vòng đời | Active | — |
| Number of Circuits | — | 1 circuit |
| -3 dB Bandwidth | — | 160 MHz at ±15 V |
| Input-Referred Noise | — | 6.5 nV/Hz |
| Input Offset Voltage | — | 7 mV |
| Gain Tolerance | — | 1 dB |
| Common-Mode Noise Rejection | — | Balanced outputs reject common-mode noise |
| Supply Condition for Bandwidth | — | ±15 V |
| Process Technology | — | Complementary bipolar BiComI process |
| Signal-Path Architecture | — | True differential input-to-differential output |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |