TL072CDR vs TL072CP तुलना
विस्तृत दोनों ओर की तुलना TL072CDR द्वारा Texas Instruments और TL072CP द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Texas Instruments
TL072CP - Dual JFET-Input Low-Noise Op Amp, 8-PDIP | Texas Instruments
TL072CP ✓ सक्रियविशेषता तुलना
| पैरामीटर | TL072CDR | TL072CP |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Amplifier ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Amplifier Type | Dual operational amplifier | JFET-Input Operational Amplifier |
| Input Stage | JFET-input | — |
| Number of Amplifiers | 2 | — |
| Gain-Bandwidth Product | 3 MHz | — |
| Slew Rate | 13 V/µs | 13 V/µs (typical) |
| Listed Supply Voltage Range | 7 V to 36 V | — |
| पैकेज | 8-pin SOIC | — |
| Frequency Compensation | Internal | — |
| Output Short-Circuit Protection | Yes | Yes |
| Input Impedance | High; exact value not supplied in verified data | — |
| Input Bias Current | Low; exact value not supplied in verified data | 30 pA (typical) |
| Low Total Harmonic Distortion | Yes; exact value not supplied in verified data | — |
| आउटपुट नॉइज़ | [DATA_NEEDED: output noise] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 3 mV (typical, C grade) |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| सप्लाई करंट | [DATA_NEEDED: supply current] | — |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | 0°C to +70°C (C grade) |
| माउंटिंग प्रकार | Surface mount | Through Hole |
| Manufacturer | — | Texas Instruments |
| Part Status | — | Active |
| Number of Circuits | — | 2 (Dual) |
| Gain Bandwidth Product | — | 3 MHz (typical) |
| Input Noise Voltage Density | — | 18 nV/√Hz (typical at 1 kHz) |
| Total Harmonic Distortion | — | 0.003% (typical) |
| Supply Voltage Range (Dual) | — | ±3.5 V to ±18 V |
| Supply Voltage Range (Single) | — | 7 V to 36 V |
| पैकेज / केस | — | 8-PDIP (Plastic DIP, through-hole) |
| पिन काउंट | — | 8 |
| Internal Frequency Compensation | — | Yes |
| Latch-up Free Operation | — | Yes |
| RoHS स्थिति | — | Compliant |