AD532JHZ - 4-Quadrant Analog Multiplier | Analog Devices
MPN: AD532JHZ ✗ Son Kullanım ZamanıAD532JHZ Genel Bakış
An integrated circuit analog multiplier is a precision signal-processing component that multiplies two input voltages and produces an output proportional to their product. When used in a feedback arrangement with an analog divider, it can also perform division, squaring, root extraction, modulation, demodulation, and signal generation. The AD532 belongs to the broader analog multiplier and divider hierarchy within analog integrated circuits, where precision linear signal processing complements general-purpose amplifier functions.
The AD532JHZ combines four-quadrant operation with internal calibration. Four-quadrant capability means the product output can change polarity as either input crosses zero, a requirement for many modulation and control systems. Internal trimming reduces assembly complexity by eliminating external adjustment networks while preserving the factory-calibrated characteristics of the monolithic device. Its dual ±15 V supply also provides sufficient headroom for bipolar analog signals commonly encountered in laboratory and industrial control equipment.
The AD532 is specified at 25 °C with ±15 V supply rails and a minimum load resistance of 2 kΩ. These conditions are important when evaluating signal loading, output range, and accuracy because performance and usable output swing depend on the circuit configuration. The device is intended for precision multiplier and divider circuits, including analog control loops, measurement bridges, instrumentation channels, and modulation systems.
Typical uses include analog computation modules, laboratory measurement systems, industrial process-control equipment, and communication-signal processing. In each case, the AD532JHZ can implement multiplication directly and division through a closed-loop arrangement. Designers should account for supply polarity, input and output signal ranges, load impedance, grounding, and frequency-dependent accuracy when planning the surrounding analog network.
A primary design consideration is preserving the common reference and feedback-node behavior of the multiplier circuit. Incorrect grounding, inadequate return paths, or loading that violates the minimum 2 kΩ load condition can degrade performance. The 10-pin TO-100 package also requires adequate clearance and suitable thermal management because a through-hole package can be exposed to elevated internal temperature at sustained high dissipation.
This page combines manufacturer product information, technical search results, package details, lifecycle status, pricing evidence, and practical selection guidance. It also distinguishes genuine pin-compatible AD532 family alternatives from broader analog multipliers that may offer similar functions but cannot be assumed to share the same footprint or pinout.
Drop-in alternatifler için AD532JHZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller AD532JHZ (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type.
AD532KHZ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD532SH
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD532KH
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
AD532JH
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD532JHZ Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | Internally trimmed integrated circuit multiplier |
| Multiplier Function | Four-quadrant analog multiplication |
| Divider Capability | Supported by analog feedback configuration |
| Besleme Gerilimi | ±15 V |
| Specified Temperature | 25 °C |
| Minimum Load Resistance | 2 kΩ |
| Offset Voltage Configuration | Grounded unless otherwise noted |
| Paket | 10-pin TO-100 |
| Package Type | TO-100-10 |
| Montaj Türü | Through-hole |
| Packaging | Tube |
| Trim Method | Internal trimming |
| Device Class | Analog multiplier/divider IC |
| Product Status | Not recommended for new designs |
AD532JHZ to-100-10 Pin Yapısı Kılavuzu
AD532JHZ (to-100-10 paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: AD532JHZ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
AD532JHZ için uygundur 6 uygulamas: Precision Analog Computation, Analog Divider Circuits, Instrumentation Signal Processing, Industrial Process Control, Modulation and Demodulation, Legacy Equipment Repair.
Precision Analog Computation
The AD532JHZ is suitable for analog computation modules that require the product of two bipolar input signals. Its four-quadrant operation allows the output polarity to follow the signs of both inputs, while internal trimming eliminates external calibration networks that would otherwise add components and adjustment effort. In a suitable feedback and reference network, the multiplier core provides a compact way to implement multiplication, scaling, and related control equations. The specified ±15 V supplies support traditional bipolar signal ranges, and the manufacturer lists a minimum load resistance of 2 kΩ. Designers should preserve that loading condition and establish an appropriate analog ground reference before the circuit is evaluated for accuracy.
Önerilen
Analog Divider Circuits
The AD532JHZ can support divider and ratio-computation circuits when placed in an appropriate analog feedback arrangement. Its internally trimmed multiplier element reduces the number of external adjustment components compared with modular implementations, while four-quadrant behavior accommodates signals that change polarity. This makes the device useful in control and measurement systems where a denominator or reference signal varies dynamically. Application design must include the AD532 data sheet’s reference-network requirements, minimum 2 kΩ load condition, and ±15 V reference specification conditions. Stable feedback layout and grounded offset inputs are particularly important because parasitic resistance and high-impedance nodes can introduce errors in division ratios.
Önerilen
Instrumentation Signal Processing
The AD532JHZ fits laboratory and industrial instrumentation blocks that must multiply a measured signal by a scale factor, coefficient, or control variable. The monolithic, internally trimmed construction simplifies procurement of one calibrated multiplier rather than a modular assembly with several external trimmers. Four-quadrant operation is useful for bipolar sensor outputs and phase-sensitive measurements where the two inputs can have either polarity. The 10-pin TO-100 package provides through-hole assembly and adequate spacing for hand installation in legacy instruments. Engineers should pay attention to grounding, resistor accuracy, input levels, output loading, and thermal rise so that system error is dominated by the external precision components rather than layout noise.
Önerilen
Industrial Process Control
The AD532JHZ can be used in legacy process-control systems to calculate proportional products or implement feedback-controlled analog functions. Its four-quadrant behavior permits positive and negative process-error signals without switching the multiplier’s operating polarity manually. Internal trimming is particularly valuable in industrial equipment because it reduces external calibration hardware and assembly variation. The specified ±15 V dual supply aligns with conventional industrial analog signal-chain practices, although the circuit must observe the data sheet’s minimum 2 kΩ load requirement. For new installations, evaluate current-recommended precision analog products because the AD532 family is not recommended for new designs; for maintenance of existing equipment, exact ordering-code verification is essential.
Önerilen
Modulation and Demodulation
The AD532JHZ is suitable for product-modulation stages in bipolar signal-processing systems. Multiplying a message signal by a sinusoidal or switching reference produces a modulated product, while four-quadrant operation supports references and message signals with changing polarity. Its internally trimmed multiplier provides a compact monolithic implementation for laboratory transmitters, educational equipment, and legacy communications apparatus. The designer must keep signal amplitudes within the device’s operating limits and account for the minimum 2 kΩ load requirement at the output. PCB or chassis layout should minimize loop area around the multiplier, reference source, and feedback components because stray capacitance can affect modulation bandwidth and unwanted spectral products.
Önerilen
Legacy Equipment Repair
The AD532JHZ is primarily valuable for repairing or maintaining vintage analog instruments, laboratory equipment, and industrial controllers that already use the AD532 family. Because the part is supplied in a 10-pin TO-100 package and described as internally trimmed, an exact-ordering-code replacement can preserve the original circuit architecture when its specifications match. Technicians should compare the manufacturer ordering table, pin diagram, temperature grade, and operating conditions before installation. The component is not recommended for new designs, so long-term continuity planning should include lifecycle monitoring and an evaluation of currently recommended precision multiplier products. This page’s Request a Quote form is the appropriate route for current AD532JHZ supply and lead-time information.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: AD532JHZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | AD532KHZ | AD532SH | AD532KH | AD532JH |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 | TO-100-10 |
| Function | Four-quadrant analog multiplier/divider IC | Four-quadrant analog multiplier/divider IC | Four-quadrant analog multiplier/divider IC | Four-quadrant analog multiplier/divider IC | Four-quadrant analog multiplier/divider IC |
| Temperature Grade | AD532JHZ ordering grade | AD532KHZ ordering grade | AD532SH ordering grade | AD532KH ordering grade | AD532JH ordering grade |
Ana Farklılayıcılar
- Pin-compatible AD532 family maintenance path (karşılaştırma:AD532KHZ)
- Internal trimming reduces external adjustment (karşılaştırma:AD532SH)
- Four-quadrant bipolar multiplication in a through-hole package (karşılaştırma:AD532JH)
Tasarım Notları
Do not assume that any 10-pin multiplier is interchangeable with the AD532JHZ. Use the manufacturer pin-configuration drawing to verify signal inputs, reference terminals, offset-voltage grounding, and supply connections. The minimum load resistance is 2 kΩ under the stated specification conditions, so output buffers may be needed when the surrounding circuit presents a lower impedance.
Keep the multiplier’s reference and feedback components close to their associated terminals and use a low-impedance analog ground return. High-impedance nodes around the multiplier can pick up noise and introduce ratio errors, particularly in division and modulation circuits. Arrange input, feedback, and output paths to avoid crossing sensitive nodes and maintain a compact ground loop beneath the analog section.
The TO-100 package provides through-hole spacing but does not eliminate thermal-rise concerns. Check dissipation under the actual input, output, and feedback-network conditions, and provide copper area or a suitable heat path when operating continuously at elevated dissipation. Verify that airflow and enclosure temperature remain compatible with the selected ordering grade and the manufacturer’s operating-temperature limits.
Uyumluluk Bilgisi
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements were identified. AEC-Q100 is not applicable because the AD532 is a general-purpose analog multiplier rather than an automotive-qualified device.