Analog Devices

AD707AH - Ultralow Drift Precision Op Amp | Analog Devices

MPN: AD707AH ✓ सक्रिय
15 µV Vdss 1 nA Id TO-99 Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD707AH अवलोकन

Analog Devices AD707AH is a low-cost, high-precision operational amplifier designed for instrumentation and other precision signal-conditioning applications. The device provides a maximum offset voltage of 15 µV, maximum offset-voltage drift of 0.35 µV/°C, voltage noise below 0.35 µV p-p to 10 Hz, and a minimum open-loop gain of 130 dB. It is packaged in a TO-99 metal-can package for applications that require stable DC performance and precise low-level amplification.

An operational amplifier is an active analog semiconductor that uses high-gain negative feedback to amplify the difference between two input voltages. Precision operational amplifiers extend this category by minimizing input offset voltage, offset drift, bias current, and noise. The AD707AH occupies the precision-amplifier tier of the broader operational-amplifier, analog-IC, and semiconductor hierarchy, making it suitable for bridges, sensor interfaces, laboratory equipment, and high-gain feedback networks.

The AD707AH's principal advantages include very high DC precision, high open-loop gain, strong common-mode rejection, high power-supply rejection, and low input-bias current. Its 130 dB minimum open-loop gain supports accurate closed-loop amplification, while 120 dB minimum CMRR and 120 dB minimum PSRR reduce errors from common-mode input signals and supply variation. A 0.9 MHz gain-bandwidth product provides useful bandwidth for precision feedback networks operating below the unity-gain frequency.

The AD707AH is built for applications where drift and offset dominate the error budget. Its 0.35 µV/°C maximum offset-voltage drift improves accuracy over changing ambient temperature, while its 1 nA maximum input-bias current limits disturbance in high-impedance transducers. The combination of 130 dB open-loop gain, 120 dB CMRR, and 120 dB PSRR is particularly useful when the amplifier follows small sensor signals in the presence of ground offsets and imperfect supply rails.

Typical uses include strain-gauge and RTD front ends, thermocouple instrumentation, low-level current-to-voltage conversion, precision filter stages, laboratory measurement equipment, and closed-loop sensor excitation systems. The TO-99 package is particularly appropriate where hermetic mechanical construction, compact size, and long-term precision are priorities in industrial or aerospace-related instrumentation.

When designing around the AD707AH, treat input offset voltage, offset drift, bias current, noise, and bandwidth as a combined error budget rather than selecting the amplifier from gain alone. Stable reference resistors, clean grounding, appropriate bypass capacitors, and careful attention to differential-input layout help preserve the low-noise and high-impedance performance expected from a precision operational amplifier.

This page combines manufacturer-level operating characteristics, package information, application guidance, and drop-in replacement analysis. It also distinguishes exact-pin-compatible options from related AD707 variants that require package and qualification checks before substitution.

के लिए ड्रॉप-इन विकल्प AD707AH — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

AD707AH/883Q

✅ ड्रॉप-इन
📦 TO-99
Identical TO-99 package and 0 mm package-dimension difference; the /883Q ordering designation adds a qualification distinction without a quantified core electrical delta.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD707AH Maximum Ratings और Electrical Characteristics

Product Type Ultralow drift precision operational amplifier
Maximum Offset Voltage 15 µV
Maximum Offset Voltage Drift 0.35 µV/°C
Maximum Voltage Noise to 10 Hz 0.35 µV p-p
Minimum Open-Loop Gain 130 dB
Minimum Common-Mode Rejection 120 dB
Minimum Power-Supply Rejection 120 dB
Maximum Input Bias Current 1 nA
Gain-Bandwidth Product 0.9 MHz
Maximum Supply Voltage 22 V
Power Dissipation 0.5 W
पैकेज TO-99
माउंटिंग प्रकार Through-hole

AD707AH to-99 पिन कॉन्फ़िगरेशन गाइड

AD707AH (to-99 पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD707AH के लिए to-99 पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD707AH.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD707AH के लिए उपयुक्त है 6 अनुप्रयोगs: Strain-Gauge Bridge Instrumentation, Thermocouple and Low-Level Sensor Amplification, Precision Current-to-Voltage Conversion, Laboratory Measurement and Instrumentation, High-Impedance Sensor Buffering, Precision Active Filtering.

🏭

Strain-Gauge Bridge Instrumentation

The AD707AH is well matched to strain-gauge bridge front ends because its 15 µV maximum offset voltage and 0.35 µV/°C maximum offset drift limit errors in small differential signals. A 120 dB minimum common-mode rejection ratio helps suppress bridge excitation common-mode voltage, while the 1 nA maximum input-bias current minimizes loading of high-impedance sensor paths. Place the amplifier near the bridge input, use low-noise gain-setting resistors, and keep the differential traces short and symmetric. Its 0.9 MHz gain-bandwidth product is adequate for static-load and low-frequency measurement channels, but it should not be treated as a wideband strain-gage signal-chain solution.

🌡️

Thermocouple and Low-Level Sensor Amplification

The AD707AH supports thermocouple and other low-level sensor interfaces where thermal drift and input bias can create meaningful measurement errors. The maximum offset drift of 0.35 µV/°C and maximum input-bias current of 1 nA help preserve weak sensor outputs over temperature and source impedance. Its minimum open-loop gain of 130 dB supports accurate high-gain feedback configurations, while 120 dB minimum CMRR reduces common-mode pickup. Use cold-junction compensation with stable reference components, keep the input path away from switching power nodes, and confirm that the intended amplifier gain keeps closed-loop bandwidth below the device’s 0.9 MHz gain-bandwidth product.

⚡

Precision Current-to-Voltage Conversion

The AD707AH can provide low-offset current-to-voltage conversion for sensors whose output current is too small or too variable to measure directly with a passive resistor. Its 15 µV maximum offset voltage translates into a fixed output error after the inverting gain is applied, while 120 dB minimum PSRR helps prevent supply variation from coupling into the result. For practical designs, select feedback and balancing resistors with suitable noise and tolerance, keep their thermal coefficients matched, and verify that total feedback resistance remains compatible with the amplifier’s input-bias-current error. The TO-99 package supports compact through-hole analog instrumentation.

🧪

Laboratory Measurement and Instrumentation

The AD707AH is appropriate for laboratory front ends that amplify small differential signals while rejecting supply noise and common-mode voltage. The combination of 130 dB minimum open-loop gain, 120 dB minimum CMRR, and 120 dB minimum PSRR supports accurate feedback-based amplification. Its 1 nA maximum input-bias current is useful with high-impedance sources, while the 0.35 µV/°C maximum offset drift improves repeatability across changing laboratory temperatures. Layout should include a quiet ground strategy, short input connections, stable feedback resistors, and supply bypass capacitance placed directly near the device pins. The device favors precision measurement over high-speed waveform capture.

🧩

High-Impedance Sensor Buffering

The AD707AH can buffer high-impedance sensors because its maximum input-bias current is only 1 nA, reducing the voltage error introduced into a high source impedance. A unity-gain buffer configuration preserves the input signal without demanding substantial closed-loop bandwidth, and the 120 dB minimum common-mode rejection ratio improves immunity to voltage common to both inputs. Use a clean, low-leakage PCB and consider guarding around sensitive input nodes. Its 0.9 MHz gain-bandwidth product is more than adequate for many temperature, position, and chemical-sensor interfaces, although it does not target high-speed or very high-frequency sensor signals.

🔧

Precision Active Filtering

The AD707AH is useful in precision active-filter stages where low offset and low drift help preserve the accuracy of the filter’s DC operating point. Its 130 dB minimum open-loop gain supports practical closed-loop gain control, while low input-bias current minimizes interaction with high-impedance filter networks. The 0.9 MHz gain-bandwidth product should be compared with the required closed-loop bandwidth and phase margin at each stage rather than relying only on the nominal gain-bandwidth value. Low-tolerance, low-noise resistors and capacitors are important because passive-component drift can overwhelm the amplifier’s excellent DC performance. Keep the layout symmetrical and decouple the supply pins close to the package.

अनुशंसित उत्पादों का सारांश

AD707BH Related AD707 precision operational amplifier for comparative selection उपयोग में: Strain-Gauge Bridge Instrumentation, Laboratory Measurement and Instrumentation, Precision Active Filtering AD707AH/883Q Same-package qualified ordering option उपयोग में: Thermocouple and Low-Level Sensor Amplification, High-Impedance Sensor Buffering AD707AH Analog Devices उपयोग में: Precision Current-to-Voltage Conversion
What are the key specifications of AD707AH that engineers should know?
The AD707AH is an ultralow-drift precision operational amplifier with a 15 µV maximum offset voltage, 0.35 µV/°C maximum offset drift, 130 dB minimum open-loop gain, and a 0.9 MHz gain-bandwidth product. According to the Analog Devices manufacturer datasheet, it also provides 120 dB minimum CMRR, 120 dB minimum PSRR, and 1 nA maximum input-bias current. These specifications make it most relevant to low-level sensor interfaces where offset, drift, bias current, and common-mode errors dominate the measurement error.
Where can I download the AD707AH datasheet PDF?
The AD707AH datasheet PDF can be accessed through the AD707AH documentation link on this page, with a manufacturer-hosted copy available from Analog Devices when available. The document identifies the AD707 as an ultralow drift operational amplifier and includes its electrical characteristics, pin configuration, and application information. Before schematic release, use the package drawing and pin-description table in the manufacturer datasheet to verify physical orientation and the relationship between offset null and compensation terminals.
Where can I find the AD707AH pinout?
The AD707AH pinout is documented in the pin-configuration section of the Analog Devices manufacturer datasheet. The device is supplied in a TO-99 metal-can package, whose lead arrangement differs from the familiar eight-pin DIP outline even though both use through-hole mounting. Do not infer the connections from a generic eight-pin op-amp symbol. Verify the can orientation, lead numbering, offset-null terminals, supply pins, and any exposed connection against the package drawing before laying out the PCB.
Is the AD707AH suitable for precision strain-gauge measurement?
The AD707AH is well suited to precision strain-gauge front ends because its 15 µV maximum offset voltage, 0.35 µV/°C maximum offset drift, and 1 nA maximum input-bias current help preserve weak differential signals. Its 120 dB minimum CMRR also reduces error when the input pair is exposed to ground offsets. According to the Analog Devices manufacturer datasheet, the amplifier should be paired with low-noise resistors and careful layout, since amplifier specifications alone cannot remove errors introduced by the gauge, cabling, reference network, or ADC.
AD707AH versus AD707BH — which is better for precision instrumentation?
The AD707AH is the appropriate choice when the required electrical behavior and package match the AD707AH specification exactly; the AD707BH should be selected only after its voltage, temperature, qualification, and package characteristics are checked against the instrument requirements. The AD707BH appears in a direct comparison with the AD707AH, but the available comparison identifies differences in voltage range, power consumption, and package size rather than confirming an interchangeable pinout. Therefore, treat the two as related family members until a manufacturer drawing validates every connection.
What is the difference between AD707AH and AD707AN?
The AD707AN is a related AD707-family listing, but it is not established here as a drop-in replacement for the TO-99 AD707AH because its package and pin arrangement require separate verification. A functional-equivalent amplifier still needs the same package dimensions, lead numbering, supply connections, offset-null arrangement, and electrical ratings before PCB substitution is safe. Use the AD707AN only after comparing the Analog Devices manufacturer datasheets and confirming that the physical footprint and every electrical requirement match the original design.
What can replace AD707AH without redesigning the PCB?
AD707AH/883Q is the identified same-package replacement candidate, but the available cross-reference information does not establish five or more qualified alternatives for this MPN. Most other AD707AH-related listings are same-series or same-package candidates rather than confirmed drop-in replacements. For a no-redesign replacement, require an exact TO-99 outline, matching pin numbering, matching supply-voltage range, and equivalent offset, drift, noise, gain, and bias-current performance. Use the manufacturer package drawing and electrical tables for final approval.
When should I choose AD707AH over a general-purpose operational amplifier?
Choose the AD707AH over a general-purpose amplifier when DC offset and temperature drift would corrupt a low-level measurement. Its 15 µV maximum offset voltage and 0.35 µV/°C maximum drift are considerably more purposeful for precision instrumentation than ordinary high-current or general-purpose devices. The trade-off is a 0.9 MHz gain-bandwidth product, which is lower than the bandwidth of many modern general-purpose amplifiers. Select it for accurate DC and low-frequency signal conditioning rather than for wideband or high-speed waveform work.
Is AD707AH suitable for high-impedance sensor interfaces?
The AD707AH is suitable for many high-impedance sensor interfaces because its maximum input-bias current is only 1 nA. That low bias current produces less measurement disturbance than a higher-bias-current amplifier when the source impedance is large. The device also offers 120 dB minimum CMRR for common-mode error rejection. For the best performance, use high-value but low-noise feedback resistors, guard sensitive input traces where appropriate, and keep PCB contamination and leakage under control because board-level contamination can still dominate very high-impedance measurements.
How much power does the AD707AH dissipate?
The AD707AH has a listed maximum power dissipation of 0.5 W and supports supply voltages up to 22 V. Actual dissipation depends on the selected supply voltage, output voltage, quiescent current, load current, and ambient temperature. Because the device is supplied in a TO-99 metal-can package, designers should calculate worst-case dissipation at the highest operating supply and output conditions, provide adequate PCB spacing and copper, and verify that the resulting junction temperature remains within the device rating.
What are the main applications for the AD707AH?
The AD707AH is intended for precision applications in which low offset, low drift, high open-loop gain, and low bias current are more important than wide bandwidth. Typical uses include strain-gauge bridges, thermocouple interfaces, current-to-voltage converters, laboratory instrumentation, precision filters, and low-level sensor amplifiers. The Analog Devices manufacturer datasheet describes the AD707 as a low-cost, high-precision amplifier suitable for a wide range of precision applications, with the TO-99 package supporting compact, through-hole instrumentation.
Is AD707AH available for purchase and what is the lead time?
Current inventory and lead time should be requested through the Request a Quote form on this page so that the exact AD707AH suffix, package, quantity, and delivery requirements can be confirmed together. The device is presently represented by active component listings, but availability can change with manufacturer inventory and market demand. The form allows XAIPART to confirm current stock status, minimum order quantity, lead time, and shipment options for the TO-99 package without substituting a different electrical grade.
What is the current price of AD707AH?
The current AD707AH price is best obtained through the Request a Quote form on this page because it is calculated for the selected quantity and order conditions. The form is the appropriate route for checking the exact TO-99 ordering option, including any grade, inspection, or shipment requirements. Price and availability should be confirmed together, especially when production quantities or compliance documentation are needed, because component costs and inventory can change without advance notice.
How long is the AD707AH lead time?
The current AD707AH lead time should be confirmed through the Request a Quote form on this page by stating the required quantity and target delivery date. Lead time can vary with the selected ordering option, available manufacturer inventory, and shipment method. The request should identify the complete AD707AH MPN and the TO-99 package requirement so that the quotation and delivery schedule correspond to the actual component being placed into production.
Is AD707AH RoHS compliant and qualified for automotive applications?
The RoHS and REACH status of AD707AH should be checked in the current Analog Devices product documentation before a regulated production release. The established ordering suffix AD707AH does not by itself identify an AEC-Q100-qualified automotive grade. Automotive applications therefore require a specifically qualified ordering option and supporting manufacturer documentation rather than an assumption based on the base family name. Request the current compliance and qualification documents through the Request a Quote form on this page.

के लिए इंजीनियरिंग संदर्भ डेटा AD707AH — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AD707AH when the design requires a low-offset, low-drift amplifier for instrumentation and low-level sensor signals. Its 15 µV maximum offset voltage, 0.35 µV/°C maximum drift, 1 nA maximum input-bias current, and 120 dB CMRR make it appropriate when DC accuracy matters more than bandwidth. Select AD707AH/883Q when the same TO-99 mechanical arrangement and core electrical behavior are needed with the additional qualification designation, after confirming that qualification is appropriate for the end application. Consider AD707BH only after checking its voltage range, power consumption, package size, and exact pinout; it is not treated as an automatic replacement. AD707AN and AD707AR should likewise be selected only when their package and pin configurations fit the redesigned PCB. For high-speed or wideband signals, choose an amplifier with a substantially higher gain-bandwidth product.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD707AH/883Q
Package TO-99 TO-99 - same package
Brand Analog Devices Analog Devices

मुख्य विशेषताएँ

  • Precision-focused DC performance (बनामAD707BH)
  • Low disturbance for high-impedance sources (बनामAD707AH/883Q)
  • Strong rejection of common-mode and supply disturbances (बनामAD707BH)

डिज़ाइन नोट्स

Use the TO-99 can drawing in the Analog Devices manufacturer datasheet when defining the PCB footprint. Do not assume that the lead pattern of a conventional DIP-8 is interchangeable. Confirm can diameter, lead pitch, lead length, and row spacing mechanically, then place the device close to its input source. Short differential traces, symmetric routing, and a single low-impedance ground reference help preserve the benefit of the AD707AH's 120 dB minimum CMRR and 1 nA maximum input-bias current.

Keep the AD707AH input and feedback components away from switching-regulator, relay, and high-current return paths. Use short feedback traces to minimize added capacitance and susceptibility to leakage, and avoid routing sensitive inputs beneath power converters or digital-clock regions. If the circuit handles very high source impedances, guard the input nodes and control board contamination because external surface leakage can overwhelm the amplifier's low 1 nA maximum input-bias current.

Calculate dissipation from the actual supply and output conditions rather than using the 22 V maximum supply rating as a normal operating point. The listed 0.5 W maximum power dissipation is a device limit, not a continuous design target. Include output quiescent and load current, maintain copper around the TO-99 leads, and verify the worst-case ambient temperature. If the calculated dissipation approaches the limit, reduce the voltage drop across the amplifier or provide a suitable thermal path before production release.

Do not select the AD707AH solely by its 130 dB minimum open-loop gain and then expect wideband operation. Its 0.9 MHz gain-bandwidth product limits the usable closed-loop bandwidth and phase margin at higher gains. Check the required noise gain, signal bandwidth, settling behavior, and feedback-network impedance for every operating gain. Low-offset resistors and capacitors are also necessary because their tolerance and thermal drift can otherwise dominate the amplifier's 15 µV maximum offset and 0.35 µV/°C maximum drift.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The established AD707AH ordering suffix does not identify an automotive-qualified variant. Obtain current manufacturer compliance and qualification documentation for the exact ordering option before production release.

डेटा सत्यापन तिथि: 2026-11-09 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD707AH datasheet AD707AH datasheet pdf AD707AH pinout AD707AH TO-99 pinout AD707AH specifications AD707AH offset voltage AD707AH equivalent AD707AH replacement AD707AH cross reference AD707AH vs AD707BH AD707AH precision amplifier AD707AH strain gauge amplifier AD707AH price AD707AH stock Analog Devices AD707AH

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD707AH AD707AH/883Q AD707AN AD707AR AD707BH operational amplifier precision operational amplifier ultralow drift amplifier analog integrated circuit semiconductor TO-99 metal-can package through-hole mounting input offset voltage offset-voltage drift open-loop gain common-mode rejection ratio CMRR power-supply rejection ratio PSRR input-bias current gain-bandwidth product strain-gauge bridge precision instrumentation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें