AD707AH - Ultralow Drift Precision Op Amp | Analog Devices
MPN: AD707AH ✓ Hoạt độngAD707AH Tóm tắt
An operational amplifier is an active analog semiconductor that uses high-gain negative feedback to amplify the difference between two input voltages. Precision operational amplifiers extend this category by minimizing input offset voltage, offset drift, bias current, and noise. The AD707AH occupies the precision-amplifier tier of the broader operational-amplifier, analog-IC, and semiconductor hierarchy, making it suitable for bridges, sensor interfaces, laboratory equipment, and high-gain feedback networks.
The AD707AH's principal advantages include very high DC precision, high open-loop gain, strong common-mode rejection, high power-supply rejection, and low input-bias current. Its 130 dB minimum open-loop gain supports accurate closed-loop amplification, while 120 dB minimum CMRR and 120 dB minimum PSRR reduce errors from common-mode input signals and supply variation. A 0.9 MHz gain-bandwidth product provides useful bandwidth for precision feedback networks operating below the unity-gain frequency.
The AD707AH is built for applications where drift and offset dominate the error budget. Its 0.35 µV/°C maximum offset-voltage drift improves accuracy over changing ambient temperature, while its 1 nA maximum input-bias current limits disturbance in high-impedance transducers. The combination of 130 dB open-loop gain, 120 dB CMRR, and 120 dB PSRR is particularly useful when the amplifier follows small sensor signals in the presence of ground offsets and imperfect supply rails.
Typical uses include strain-gauge and RTD front ends, thermocouple instrumentation, low-level current-to-voltage conversion, precision filter stages, laboratory measurement equipment, and closed-loop sensor excitation systems. The TO-99 package is particularly appropriate where hermetic mechanical construction, compact size, and long-term precision are priorities in industrial or aerospace-related instrumentation.
When designing around the AD707AH, treat input offset voltage, offset drift, bias current, noise, and bandwidth as a combined error budget rather than selecting the amplifier from gain alone. Stable reference resistors, clean grounding, appropriate bypass capacitors, and careful attention to differential-input layout help preserve the low-noise and high-impedance performance expected from a precision operational amplifier.
This page combines manufacturer-level operating characteristics, package information, application guidance, and drop-in replacement analysis. It also distinguishes exact-pin-compatible options from related AD707 variants that require package and qualification checks before substitution.
Bộ thay thế dễ dàng lắp đặt cho AD707AH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
AD707AH/883Q
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
AD707AH Tỷ lệ tối đa & tính chất điện
| Product Type | Ultralow drift precision operational amplifier |
| Maximum Offset Voltage | 15 µV |
| Maximum Offset Voltage Drift | 0.35 µV/°C |
| Maximum Voltage Noise to 10 Hz | 0.35 µV p-p |
| Minimum Open-Loop Gain | 130 dB |
| Minimum Common-Mode Rejection | 120 dB |
| Minimum Power-Supply Rejection | 120 dB |
| Maximum Input Bias Current | 1 nA |
| Gain-Bandwidth Product | 0.9 MHz |
| Maximum Supply Voltage | 22 V |
| Power Dissipation | 0.5 W |
| Hộp | TO-99 |
| Kiểu lắp đặt | Through-hole |
Hướng dẫn cấu hình chân AD707AH to-99
Cấu hình chân cho AD707AH (to-99 gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AD707AH.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AD707AH phù hợp cho 6 Áp dụngs: Strain-Gauge Bridge Instrumentation, Thermocouple and Low-Level Sensor Amplification, Precision Current-to-Voltage Conversion, Laboratory Measurement and Instrumentation, High-Impedance Sensor Buffering, Precision Active Filtering.
Strain-Gauge Bridge Instrumentation
The AD707AH is well matched to strain-gauge bridge front ends because its 15 µV maximum offset voltage and 0.35 µV/°C maximum offset drift limit errors in small differential signals. A 120 dB minimum common-mode rejection ratio helps suppress bridge excitation common-mode voltage, while the 1 nA maximum input-bias current minimizes loading of high-impedance sensor paths. Place the amplifier near the bridge input, use low-noise gain-setting resistors, and keep the differential traces short and symmetric. Its 0.9 MHz gain-bandwidth product is adequate for static-load and low-frequency measurement channels, but it should not be treated as a wideband strain-gage signal-chain solution.
Được đề xuất
Thermocouple and Low-Level Sensor Amplification
The AD707AH supports thermocouple and other low-level sensor interfaces where thermal drift and input bias can create meaningful measurement errors. The maximum offset drift of 0.35 µV/°C and maximum input-bias current of 1 nA help preserve weak sensor outputs over temperature and source impedance. Its minimum open-loop gain of 130 dB supports accurate high-gain feedback configurations, while 120 dB minimum CMRR reduces common-mode pickup. Use cold-junction compensation with stable reference components, keep the input path away from switching power nodes, and confirm that the intended amplifier gain keeps closed-loop bandwidth below the device’s 0.9 MHz gain-bandwidth product.
Được đề xuất
Precision Current-to-Voltage Conversion
The AD707AH can provide low-offset current-to-voltage conversion for sensors whose output current is too small or too variable to measure directly with a passive resistor. Its 15 µV maximum offset voltage translates into a fixed output error after the inverting gain is applied, while 120 dB minimum PSRR helps prevent supply variation from coupling into the result. For practical designs, select feedback and balancing resistors with suitable noise and tolerance, keep their thermal coefficients matched, and verify that total feedback resistance remains compatible with the amplifier’s input-bias-current error. The TO-99 package supports compact through-hole analog instrumentation.
Được đề xuất
Laboratory Measurement and Instrumentation
The AD707AH is appropriate for laboratory front ends that amplify small differential signals while rejecting supply noise and common-mode voltage. The combination of 130 dB minimum open-loop gain, 120 dB minimum CMRR, and 120 dB minimum PSRR supports accurate feedback-based amplification. Its 1 nA maximum input-bias current is useful with high-impedance sources, while the 0.35 µV/°C maximum offset drift improves repeatability across changing laboratory temperatures. Layout should include a quiet ground strategy, short input connections, stable feedback resistors, and supply bypass capacitance placed directly near the device pins. The device favors precision measurement over high-speed waveform capture.
Được đề xuất
High-Impedance Sensor Buffering
The AD707AH can buffer high-impedance sensors because its maximum input-bias current is only 1 nA, reducing the voltage error introduced into a high source impedance. A unity-gain buffer configuration preserves the input signal without demanding substantial closed-loop bandwidth, and the 120 dB minimum common-mode rejection ratio improves immunity to voltage common to both inputs. Use a clean, low-leakage PCB and consider guarding around sensitive input nodes. Its 0.9 MHz gain-bandwidth product is more than adequate for many temperature, position, and chemical-sensor interfaces, although it does not target high-speed or very high-frequency sensor signals.
Được đề xuất
Precision Active Filtering
The AD707AH is useful in precision active-filter stages where low offset and low drift help preserve the accuracy of the filter’s DC operating point. Its 130 dB minimum open-loop gain supports practical closed-loop gain control, while low input-bias current minimizes interaction with high-impedance filter networks. The 0.9 MHz gain-bandwidth product should be compared with the required closed-loop bandwidth and phase margin at each stage rather than relying only on the nominal gain-bandwidth value. Low-tolerance, low-noise resistors and capacitors are important because passive-component drift can overwhelm the amplifier’s excellent DC performance. Keep the layout symmetrical and decouple the supply pins close to the package.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho AD707AH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | AD707AH/883Q |
|---|---|---|
| Package | TO-99 | TO-99 - same package |
| Brand | Analog Devices | Analog Devices |
Bảo phân biệt quan trọng
- Precision-focused DC performance (vsAD707BH)
- Low disturbance for high-impedance sources (vsAD707AH/883Q)
- Strong rejection of common-mode and supply disturbances (vsAD707BH)
Ghi chú thiết kế
Use the TO-99 can drawing in the Analog Devices manufacturer datasheet when defining the PCB footprint. Do not assume that the lead pattern of a conventional DIP-8 is interchangeable. Confirm can diameter, lead pitch, lead length, and row spacing mechanically, then place the device close to its input source. Short differential traces, symmetric routing, and a single low-impedance ground reference help preserve the benefit of the AD707AH's 120 dB minimum CMRR and 1 nA maximum input-bias current.
Keep the AD707AH input and feedback components away from switching-regulator, relay, and high-current return paths. Use short feedback traces to minimize added capacitance and susceptibility to leakage, and avoid routing sensitive inputs beneath power converters or digital-clock regions. If the circuit handles very high source impedances, guard the input nodes and control board contamination because external surface leakage can overwhelm the amplifier's low 1 nA maximum input-bias current.
Calculate dissipation from the actual supply and output conditions rather than using the 22 V maximum supply rating as a normal operating point. The listed 0.5 W maximum power dissipation is a device limit, not a continuous design target. Include output quiescent and load current, maintain copper around the TO-99 leads, and verify the worst-case ambient temperature. If the calculated dissipation approaches the limit, reduce the voltage drop across the amplifier or provide a suitable thermal path before production release.
Do not select the AD707AH solely by its 130 dB minimum open-loop gain and then expect wideband operation. Its 0.9 MHz gain-bandwidth product limits the usable closed-loop bandwidth and phase margin at higher gains. Check the required noise gain, signal bandwidth, settling behavior, and feedback-network impedance for every operating gain. Low-offset resistors and capacitors are also necessary because their tolerance and thermal drift can otherwise dominate the amplifier's 15 µV maximum offset and 0.35 µV/°C maximum drift.
Thông tin tuân thủ
The established AD707AH ordering suffix does not identify an automotive-qualified variant. Obtain current manufacturer compliance and qualification documentation for the exact ordering option before production release.