AD707AH - Ultralow Drift Precision Op Amp | Analog Devices
MPN: AD707AH ✓ NakahandaAD707AH Ulas
An operational amplifier is an active analog semiconductor that uses high-gain negative feedback to amplify the difference between two input voltages. Precision operational amplifiers extend this category by minimizing input offset voltage, offset drift, bias current, and noise. The AD707AH occupies the precision-amplifier tier of the broader operational-amplifier, analog-IC, and semiconductor hierarchy, making it suitable for bridges, sensor interfaces, laboratory equipment, and high-gain feedback networks.
The AD707AH's principal advantages include very high DC precision, high open-loop gain, strong common-mode rejection, high power-supply rejection, and low input-bias current. Its 130 dB minimum open-loop gain supports accurate closed-loop amplification, while 120 dB minimum CMRR and 120 dB minimum PSRR reduce errors from common-mode input signals and supply variation. A 0.9 MHz gain-bandwidth product provides useful bandwidth for precision feedback networks operating below the unity-gain frequency.
The AD707AH is built for applications where drift and offset dominate the error budget. Its 0.35 µV/°C maximum offset-voltage drift improves accuracy over changing ambient temperature, while its 1 nA maximum input-bias current limits disturbance in high-impedance transducers. The combination of 130 dB open-loop gain, 120 dB CMRR, and 120 dB PSRR is particularly useful when the amplifier follows small sensor signals in the presence of ground offsets and imperfect supply rails.
Typical uses include strain-gauge and RTD front ends, thermocouple instrumentation, low-level current-to-voltage conversion, precision filter stages, laboratory measurement equipment, and closed-loop sensor excitation systems. The TO-99 package is particularly appropriate where hermetic mechanical construction, compact size, and long-term precision are priorities in industrial or aerospace-related instrumentation.
When designing around the AD707AH, treat input offset voltage, offset drift, bias current, noise, and bandwidth as a combined error budget rather than selecting the amplifier from gain alone. Stable reference resistors, clean grounding, appropriate bypass capacitors, and careful attention to differential-input layout help preserve the low-noise and high-impedance performance expected from a precision operational amplifier.
This page combines manufacturer-level operating characteristics, package information, application guidance, and drop-in replacement analysis. It also distinguishes exact-pin-compatible options from related AD707 variants that require package and qualification checks before substitution.
Mga alternatibo na pwedeng ilagay na AD707AH — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
AD707AH/883Q
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD707AH Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | Ultralow drift precision operational amplifier |
| Maximum Offset Voltage | 15 µV |
| Maximum Offset Voltage Drift | 0.35 µV/°C |
| Maximum Voltage Noise to 10 Hz | 0.35 µV p-p |
| Minimum Open-Loop Gain | 130 dB |
| Minimum Common-Mode Rejection | 120 dB |
| Minimum Power-Supply Rejection | 120 dB |
| Maximum Input Bias Current | 1 nA |
| Gain-Bandwidth Product | 0.9 MHz |
| Maximum Supply Voltage | 22 V |
| Power Dissipation | 0.5 W |
| Packhaging | TO-99 |
| Uri ng Pagpapasok | Through-hole |
Gabay sa Pin Configuration ng AD707AH to-99
Pin configuration para sa AD707AH (to-99 package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD707AH.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD707AH ay nararapat para sa 6 aplikasyons: Strain-Gauge Bridge Instrumentation, Thermocouple and Low-Level Sensor Amplification, Precision Current-to-Voltage Conversion, Laboratory Measurement and Instrumentation, High-Impedance Sensor Buffering, Precision Active Filtering.
Strain-Gauge Bridge Instrumentation
The AD707AH is well matched to strain-gauge bridge front ends because its 15 µV maximum offset voltage and 0.35 µV/°C maximum offset drift limit errors in small differential signals. A 120 dB minimum common-mode rejection ratio helps suppress bridge excitation common-mode voltage, while the 1 nA maximum input-bias current minimizes loading of high-impedance sensor paths. Place the amplifier near the bridge input, use low-noise gain-setting resistors, and keep the differential traces short and symmetric. Its 0.9 MHz gain-bandwidth product is adequate for static-load and low-frequency measurement channels, but it should not be treated as a wideband strain-gage signal-chain solution.
Inirekomenda
Thermocouple and Low-Level Sensor Amplification
The AD707AH supports thermocouple and other low-level sensor interfaces where thermal drift and input bias can create meaningful measurement errors. The maximum offset drift of 0.35 µV/°C and maximum input-bias current of 1 nA help preserve weak sensor outputs over temperature and source impedance. Its minimum open-loop gain of 130 dB supports accurate high-gain feedback configurations, while 120 dB minimum CMRR reduces common-mode pickup. Use cold-junction compensation with stable reference components, keep the input path away from switching power nodes, and confirm that the intended amplifier gain keeps closed-loop bandwidth below the device’s 0.9 MHz gain-bandwidth product.
Inirekomenda
Precision Current-to-Voltage Conversion
The AD707AH can provide low-offset current-to-voltage conversion for sensors whose output current is too small or too variable to measure directly with a passive resistor. Its 15 µV maximum offset voltage translates into a fixed output error after the inverting gain is applied, while 120 dB minimum PSRR helps prevent supply variation from coupling into the result. For practical designs, select feedback and balancing resistors with suitable noise and tolerance, keep their thermal coefficients matched, and verify that total feedback resistance remains compatible with the amplifier’s input-bias-current error. The TO-99 package supports compact through-hole analog instrumentation.
Inirekomenda
Laboratory Measurement and Instrumentation
The AD707AH is appropriate for laboratory front ends that amplify small differential signals while rejecting supply noise and common-mode voltage. The combination of 130 dB minimum open-loop gain, 120 dB minimum CMRR, and 120 dB minimum PSRR supports accurate feedback-based amplification. Its 1 nA maximum input-bias current is useful with high-impedance sources, while the 0.35 µV/°C maximum offset drift improves repeatability across changing laboratory temperatures. Layout should include a quiet ground strategy, short input connections, stable feedback resistors, and supply bypass capacitance placed directly near the device pins. The device favors precision measurement over high-speed waveform capture.
Inirekomenda
High-Impedance Sensor Buffering
The AD707AH can buffer high-impedance sensors because its maximum input-bias current is only 1 nA, reducing the voltage error introduced into a high source impedance. A unity-gain buffer configuration preserves the input signal without demanding substantial closed-loop bandwidth, and the 120 dB minimum common-mode rejection ratio improves immunity to voltage common to both inputs. Use a clean, low-leakage PCB and consider guarding around sensitive input nodes. Its 0.9 MHz gain-bandwidth product is more than adequate for many temperature, position, and chemical-sensor interfaces, although it does not target high-speed or very high-frequency sensor signals.
Inirekomenda
Precision Active Filtering
The AD707AH is useful in precision active-filter stages where low offset and low drift help preserve the accuracy of the filter’s DC operating point. Its 130 dB minimum open-loop gain supports practical closed-loop gain control, while low input-bias current minimizes interaction with high-impedance filter networks. The 0.9 MHz gain-bandwidth product should be compared with the required closed-loop bandwidth and phase margin at each stage rather than relying only on the nominal gain-bandwidth value. Low-tolerance, low-noise resistors and capacitors are important because passive-component drift can overwhelm the amplifier’s excellent DC performance. Keep the layout symmetrical and decouple the supply pins close to the package.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD707AH — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD707AH/883Q |
|---|---|---|
| Package | TO-99 | TO-99 - same package |
| Brand | Analog Devices | Analog Devices |
Pangunahing mga Pagkakaiba
- Precision-focused DC performance (kumpara saAD707BH)
- Low disturbance for high-impedance sources (kumpara saAD707AH/883Q)
- Strong rejection of common-mode and supply disturbances (kumpara saAD707BH)
Talaan ng Disenyo
Use the TO-99 can drawing in the Analog Devices manufacturer datasheet when defining the PCB footprint. Do not assume that the lead pattern of a conventional DIP-8 is interchangeable. Confirm can diameter, lead pitch, lead length, and row spacing mechanically, then place the device close to its input source. Short differential traces, symmetric routing, and a single low-impedance ground reference help preserve the benefit of the AD707AH's 120 dB minimum CMRR and 1 nA maximum input-bias current.
Keep the AD707AH input and feedback components away from switching-regulator, relay, and high-current return paths. Use short feedback traces to minimize added capacitance and susceptibility to leakage, and avoid routing sensitive inputs beneath power converters or digital-clock regions. If the circuit handles very high source impedances, guard the input nodes and control board contamination because external surface leakage can overwhelm the amplifier's low 1 nA maximum input-bias current.
Calculate dissipation from the actual supply and output conditions rather than using the 22 V maximum supply rating as a normal operating point. The listed 0.5 W maximum power dissipation is a device limit, not a continuous design target. Include output quiescent and load current, maintain copper around the TO-99 leads, and verify the worst-case ambient temperature. If the calculated dissipation approaches the limit, reduce the voltage drop across the amplifier or provide a suitable thermal path before production release.
Do not select the AD707AH solely by its 130 dB minimum open-loop gain and then expect wideband operation. Its 0.9 MHz gain-bandwidth product limits the usable closed-loop bandwidth and phase margin at higher gains. Check the required noise gain, signal bandwidth, settling behavior, and feedback-network impedance for every operating gain. Low-offset resistors and capacitors are also necessary because their tolerance and thermal drift can otherwise dominate the amplifier's 15 µV maximum offset and 0.35 µV/°C maximum drift.
Impormasyon ng Pagsunod sa Kautusan
The established AD707AH ordering suffix does not identify an automotive-qualified variant. Obtain current manufacturer compliance and qualification documentation for the exact ordering option before production release.