Analog Devices

AD8017ARZ - Dual High-Speed 200mA Op Amp | Analog Devices

MPN: AD8017ARZ ✓ सक्रिय
7 mA Vdss 200 mA typical Id 8-lead SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

AD8017ARZ अवलोकन

The Analog Devices AD8017ARZ is a dual, high-speed operational amplifier optimized for +12 V single-supply xDSL line-driver circuits, providing two amplifier channels in an 8-lead SOIC package. Each channel consumes 7 mA, supports output swing to within 1.0 V of the supply rail, and can deliver 10 V peak-to-peak into a 100 ohm load while maintaining low distortion.

An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs while providing high input impedance, low output impedance, and controlled gain. The AD8017 belongs to the current-feedback operational-amplifier family, where the feedback network and closed-loop gain determine bandwidth. Its place in the broader hierarchy is operational amplifier, analog amplifier, and then signal-chain integrated circuit.

The AD8017's principal advantages are its dual-channel configuration, 7 mA supply current per amplifier, and high output-current capability of typically 200 mA per channel. These characteristics allow one compact package to serve two independent xDSL transmission paths. The device can drive the customer-premises-equipment end of a twisted-pair line, where low distortion, generous output swing, and load-drive capability determine signal integrity.

Internally, the AD8017 uses a current-feedback topology rather than the voltage-feedback architecture found in many general-purpose precision amplifiers. This topology supports high-speed operation while maintaining low distortion when driving resistive and capacitive loads. The manufacturer identifies the AD8017 as a low-cost dual amplifier intended specifically for single-supply xDSL systems, where low distortion and low system cost are essential.

Typical uses include xDSL CPE transmitters, line-driver stages, twin-ended cable outputs, and panel or reference-driver circuits requiring capacitive-load drive. The 8-lead SOIC construction also simplifies assembly in cost-sensitive communications equipment. Because the amplifier is optimized around a +12 V supply, the exact operating limits, gain-bandwidth relationship, and stable capacitive-load range should be confirmed in the manufacturer datasheet before finalizing a new design.

Design attention should focus on supply decoupling, feedback-component selection, and output-stage stability. Place the bypass capacitor close to the supply pins, keep feedback traces short, and confirm that the driven load and cable capacitance remain within the amplifier's documented operating region. Probe points and test loops should also be minimized because parasitic capacitance can alter the current-feedback response.

This page combines manufacturer product information, distributor records, drop-in replacement analysis, application guidance, and design notes in one engineering reference. It highlights where the AD8017ARZ fits in xDSL and cable-driver designs, distinguishes closely related Analog Devices options, and identifies the parameters that must be verified before a second-source substitution is approved.

के लिए ड्रॉप-इन विकल्प AD8017ARZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं AD8017ARZ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Primary Application, Product Type.

Analog Devices
Package: 8-pin SOIC
Primary Application: Fiber-optic receiver
Product Type: Single-supply differential-output transimpedance amplifier
इसके साथ तुलना करें AD8017ARZ →
Texas Instruments
Package: 8-SOIC (SOIC-8)
Product Type: Wideband voltage-feedback operational amplifier with shutdown
इसके साथ तुलना करें AD8017ARZ →

AD8017AR

✅ ड्रॉप-इन
📦 8-lead SOIC
Same AD8017 die and 8-lead SOIC footprint; ordering code differs only in the lead-free suffix, with no identified electrical change

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD8014ARZ

✅ ड्रॉप-इन
Analog Devices
📦 8-lead SOIC
Current-feedback operational amplifier · 1 circuit · 400 MHz · 1.3 mA · 5 V to 12 V · ±2.5 V to ±6 V · 8-pin SOIC · Surface mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

AD8018AR-REEL

✅ ड्रॉप-इन
📦 8-lead SOIC
Same 8-lead SOIC footprint; supply range, quiescent current, output-current capability, and dynamic performance differ from the AD8017

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD8019ARZ

✅ ड्रॉप-इन
📦 8-lead SOIC
Same 8-lead SOIC footprint; the AD8019 is a higher-performance family member with differing supply, bandwidth, and drive characteristics

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

AD8017ARZ Maximum Ratings और Electrical Characteristics

Amplifier Type Dual high-speed current-feedback operational amplifier
Number of Channels 2 channels
Number of Circuits 2 circuits
Supply Current per Amplifier 7 mA
Optimized Supply +12 V
Output Current per Amplifier 200 mA typical
Output Swing Within 1.0 V of the supply rail
Maximum Output Swing 10 V peak-to-peak
Load Capability Low-distortion drive of 100 ohm and capacitive loads
पैकेज 8-lead SOIC
पिन काउंट 8 pins
माउंटिंग प्रकार Surface mount
Primary Application Single-supply xDSL CPE line driving
Lead-Free Package Option AD8017ARZ and AD8017ARZ-REEL
Evaluation Board AD8017AR-EVAL
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable

AD8017ARZ ad8017arz and ad8017arz-reel पिन कॉन्फ़िगरेशन गाइड

AD8017ARZ (ad8017arz and ad8017arz-reel पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AD8017ARZ के लिए ad8017arz and ad8017arz-reel पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AD8017ARZ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AD8017ARZ के लिए उपयुक्त है 6 अनुप्रयोगs: xDSL CPE Transmit Drivers, Twisted-Pair Cable Driver Outputs, Capacitive Panel Reference Drivers, Single-Supply Industrial Signal Conditioning, Dual-Channel Low-Voltage Communication Front Ends, Video and Instrumentation Buffering Stages.

🌐

xDSL CPE Transmit Drivers

The AD8017ARZ is designed for the customer-premises-equipment end of single-supply xDSL systems, where two channels can drive separate transmit paths. Its 200 mA typical output current per amplifier provides the drive needed for low-resistance twisted-pair interfaces, while output swing to within 1.0 V of the supply preserves usable modulation amplitude. Each channel consumes 7 mA, keeping the dual amplifier's nominal supply demand near 14 mA. Place the device close to the transformer or line-coupling network, use short feedback traces, and confirm the actual cable capacitance and load against the manufacturer stability guidance before production release.

📡

Twisted-Pair Cable Driver Outputs

The dual AD8017ARZ fits transmit stages that must deliver low-distortion signals into 100 ohm or other low-impedance cable networks. A typical 10 V peak-to-peak output capability, combined with high output-current drive, helps the amplifier maintain signal integrity as the load current increases. The 8-lead SOIC package supports compact line-interface hardware, and the two independent channels can drive paired or complementary outputs. Compensation for cable capacitance should be selected from the recommended feedback network rather than added arbitrarily at the output, because excessive load capacitance can reduce stability or alter the current-feedback response.

📺

Capacitive Panel Reference Drivers

The AD8017ARZ is appropriate for driving panel-reference and other capacitive loads where output-current capability is more important than extremely low static power. Its approximately 200 mA typical output current gives the amplifier more drive margin than a conventional low-power op amp, while 7 mA consumption per channel supports efficient dual-channel implementation. Use short traces from the amplifier to the load and preserve the manufacturer's recommended feedback impedance. Validate settling time and stability at the highest expected panel capacitance because the load value, not just its DC resistance, determines the usable bandwidth.

🏭

Single-Supply Industrial Signal Conditioning

The AD8017ARZ supports +12 V single-supply signal-conditioning systems that need two high-speed channels in one package. Its current-feedback architecture is useful when closed-loop gain and feedback resistance are chosen for a particular signal bandwidth, and the low-distortion output stage handles moderate loads more effectively than a general-purpose amplifier. Decouple the supply pins locally and route the two channels to minimize shared-ground current. Before using the part outside xDSL-style interfaces, verify the allowed supply range, input common-mode limits, output swing, and stability at the intended closed-loop gain in the manufacturer datasheet.

🖥️

Dual-Channel Low-Voltage Communication Front Ends

Two AD8017ARZ amplifier sections can implement independent transmit or receive-conditioning paths where board area and power are constrained. The 8-lead SOIC footprint simplifies assembly, and the 7 mA per-amplifier specification supports a relatively lean design. Current-feedback amplifiers require deliberate resistor selection around the inverting input, so calculate the feedback network for the target closed-loop gain rather than copying a voltage-feedback resistor ratio. Include isolation resistors where recommended for capacitive loads and verify channel-to-channel settling, output impedance, and distortion with the actual line interface connected.

🔧

Video and Instrumentation Buffering Stages

The AD8017ARZ can serve as a low-cost high-speed buffer or driver in instrumentation and video-adjacent circuits that operate from a +12 V rail. Its dual configuration allows matched buffering of two signals, while the high output-current capability helps preserve low distortion into downstream resistive loading. The device is not a general-purpose precision amplifier, so offset, noise, input bias current, and common-mode performance should be checked against the signal chain requirements. Use a source termination or isolation resistor if the connected load presents capacitance, and keep the feedback loop compact to avoid added phase delay.

अनुशंसित उत्पादों का सारांश

AD8017AR-EVAL Manufacturer evaluation board for prototype verification उपयोग में: xDSL CPE Transmit Drivers, Twisted-Pair Cable Driver Outputs, Single-Supply Industrial Signal Conditioning, Dual-Channel Low-Voltage Communication Front Ends, Video and Instrumentation Buffering Stages AD8018AR-REEL Same-family 8-lead SOIC candidate requiring electrical validation उपयोग में: xDSL CPE Transmit Drivers, Single-Supply Industrial Signal Conditioning AD8014ARZ Analog Devices उपयोग में: Twisted-Pair Cable Driver Outputs, Capacitive Panel Reference Drivers, Dual-Channel Low-Voltage Communication Front Ends AD8019ARZ Higher-performance same-package family candidate उपयोग में: Capacitive Panel Reference Drivers, Video and Instrumentation Buffering Stages
What is the AD8017ARZ?
The AD8017ARZ is a dual high-speed current-feedback operational amplifier from Analog Devices, packaged in an 8-lead SOIC for single-supply xDSL applications. It uses 7 mA per amplifier, can source or sink 200 mA typically, and drives output signals to within 1.0 V of the supply rail. Analog Devices identifies the device as a low-cost dual amplifier intended for the customer-premises-equipment end of xDSL lines.
Where can I download the AD8017ARZ datasheet?
The official AD8017 product page at Analog Devices is the primary location for the AD8017ARZ datasheet, electrical characteristics, and package information. The page is https://www.analog.com/en/products/ad8017.html and also identifies the AD8017AR-EVAL evaluation board. Use the manufacturer datasheet for complete pin assignments, supply limits, gain-bandwidth data, and recommended application circuits before releasing a PCB layout.
What are the key specifications engineers should know about the AD8017ARZ?
The AD8017ARZ provides two high-speed current-feedback amplifier channels in an 8-lead SOIC package. Each amplifier consumes 7 mA, has typical output-current capability of 200 mA, and operates from a design point optimized for +12 V single-supply use. Its output stage can approach within 1.0 V of the supply rail and deliver 10 V peak-to-peak with low distortion. The Analog Devices product page and datasheet remain the controlling technical references.
Is the AD8017ARZ suitable for xDSL line driving?
Yes, the AD8017ARZ is specifically intended for single-supply xDSL systems, particularly the customer-premises-equipment end of a twisted-pair line. Its dual-channel arrangement supports two independent driver functions, while the 200 mA typical output current and low-distortion operation help preserve signal quality through the line interface. Cable capacitance and the required bandwidth should still be checked against the datasheet limits for the selected gain.
How does the AD8017ARZ compare with the AD8014ARZ?
The AD8017ARZ is the better choice when high output-current drive and capacitive-load capability are priorities. The AD8014ARZ occupies the same general 8-lead SOIC amplifier family, but the AD8017 provides approximately 200 mA typical output current per amplifier and is optimized for larger capacitive loads. Confirm the AD8014's supply range, bandwidth, and output-drive data against the AD8017 before approving it as a direct substitution.
Can the AD8018AR-REEL replace the AD8017ARZ?
The AD8018AR-REEL is pin-compatible at the package level, but it should not be treated as an unconditional drop-in replacement. Its specified supply-voltage range, quiescent current, output-current capability, and dynamic performance differ from those of the AD8017ARZ. Confirm those four areas, as well as gain stability and required bandwidth, in the manufacturer datasheets before substituting the AD8018AR-REEL into an existing design.
When should I choose the AD8017ARZ over the AD8014ARZ?
Choose the AD8017ARZ when the design must drive a low-resistance cable, panel interface, or appreciable capacitive load from a single +12 V supply. Its typical 200 mA output-current capability is the decisive advantage over the AD8014ARZ in those conditions. The AD8014ARZ may remain suitable when drive requirements are lighter and its bandwidth, noise, and distortion characteristics better match the intended closed-loop gain.
Is the AD8019ARZ interchangeable with the AD8017ARZ?
The AD8019ARZ belongs to the same Analog Devices high-speed amplifier family and uses an 8-lead SOIC package, but it is not an automatic functional replacement. The AD8019 is positioned as a higher-performance part, and its supply requirements, bandwidth, output-drive behavior, and noise characteristics must be reviewed against the AD8017ARZ. Validate the complete signal chain rather than relying on package similarity alone.
What is the best drop-in replacement for the AD8017ARZ?
The closest same-family option identified is the AD8018AR-REEL, which offers package-level interchangeability in an 8-lead SOIC footprint. Its electrical specifications differ in supply range, quiescent current, output-current capability, and dynamic performance, so the substitution is conditional rather than automatic. The AD8014ARZ and AD8019ARZ are also 8-lead SOIC family members, but each requires explicit comparison of speed, drive, supply, and distortion.
What can replace the AD8017ARZ?
The AD8018AR-REEL is a practical candidate to evaluate when an 8-lead SOIC part is required, while the AD8014ARZ and AD8019ARZ provide additional options within the Analog Devices family. None should be approved solely from the package outline. Review supply voltage, quiescent current, output drive, bandwidth, stability with capacitive loads, and distortion before signing off a replacement.
How do I calculate power dissipation for the AD8017ARZ?
Estimated: each amplifier contributes approximately 7 mA of supply current, so the dual device draws about 14 mA when both channels are active. At a +12 V supply, estimated internal dissipation is 12 V multiplied by 0.014 A, or about 168 mW, before output-current contribution. Actual device dissipation also depends on output swing and load current, so use the complete supply and output-current measurements during worst-case thermal analysis.
Does the AD8017ARZ need external capacitive-load compensation?
The AD8017ARZ is designed for high output-current drive, but the correct stability network depends on closed-loop gain, cable capacitance, and the connected load. The manufacturer datasheet should be consulted for the recommended feedback resistor and output isolation arrangement. Do not add large capacitors directly to the output unless the drive condition is covered by the documented operating guidance for the selected gain.
Where can I buy the AD8017ARZ online?
Use the Request a Quote form on this page to request the current unit price, available quantity, and lead time for the AD8017ARZ. The form is the direct route for an exact-part quotation and avoids ambiguity between the standard AD8017ARZ ordering code and its reel-packed manufacturing variant. The manufacturer product page also links to evaluation resources and the device datasheet.
What is the price of the AD8017ARZ?
Submit the AD8017ARZ request through the Request a Quote form on this page for a current price and availability response. Pricing for this exact ordering code can change with quantity, inventory, and shipment format, so use the form rather than relying on a historical listing figure. Include the required quantity, reel or tube preference, and target delivery schedule when requesting the quotation.
What is the lead time and stock status for the AD8017ARZ?
Request the current stock position, minimum order quantity, and lead time for the AD8017ARZ through the Request a Quote form on this page. Stock and manufacturing schedules vary by order quantity and shipment format, so the manufacturer and authorized-channel status should be confirmed for the planned production release. Include your annual usage and required delivery date when submitting the request.

के लिए इंजीनियरिंग संदर्भ डेटा AD8017ARZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Select the AD8017ARZ when the design uses a +12 V single supply and requires two high-speed channels with substantial output-current capability, particularly for xDSL CPE line driving or capacitive panel interfaces. Its 7 mA consumption per channel and approximately 200 mA typical drive provide a useful balance between efficiency and load capability. Consider the AD8014ARZ for lower-drive signal-conditioning applications, but verify its bandwidth and distortion at the required gain. Evaluate the AD8018AR-REEL only when package-level compatibility is sufficient and its different supply range, quiescent current, output drive, and dynamic performance have been checked. The AD8019ARZ is a higher-performance family option whose supply, bandwidth, noise, and drive characteristics require explicit validation. For any substitution, verify the pin assignment, common-mode range, supply limits, feedback network, capacitive-load stability, and thermal behavior rather than relying on the shared SOIC outline alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद AD8017AR AD8014ARZ AD8018AR-REEL AD8019ARZ
Package 8-lead SOIC 8-lead SOIC - same 8-lead SOIC - same 8-lead SOIC - same 8-lead SOIC - same
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Configuration Dual amplifier Dual amplifier Dual amplifier Dual amplifier Dual amplifier
Primary Application Single-supply xDSL line driving Single-supply xDSL line driving High-speed signal amplification High-speed signal amplification High-performance signal amplification

मुख्य विशेषताएँ

  • Higher output-current capability for cable and capacitive loads (बनामAD8014ARZ)
  • Purpose-built single-supply xDSL optimization (बनामAD8018AR-REEL)
  • Lower nominal per-channel supply current for dual-channel designs (बनामAD8018AR-REEL)

डिज़ाइन नोट्स

Keep the current-feedback loop compact and place the inverting-input feedback components directly beside the relevant amplifier pins. Route each channel separately to prevent output and feedback currents from sharing copper. High-value board resistance adds unintended gain and phase error, particularly at the bandwidth for which the AD8017ARZ is selected. Use a continuous ground plane, and decouple the supply pins with a local high-frequency capacitor plus a larger bulk capacitor positioned near the device.

Do not assume that any 8-lead SOIC amplifier is electrically interchangeable with the AD8017ARZ. The AD8018AR-REEL differs in supply range, quiescent current, output-current capability, and dynamic performance, while the AD8014ARZ and AD8019ARZ are positioned differently within the family. Validate closed-loop gain, bandwidth, output swing, stability with the actual capacitive load, and power consumption against the manufacturer datasheets before approving a substitution.

Estimated: with both amplifiers active at the 7 mA per-amplifier operating point and a +12 V supply, the supply-related internal dissipation is about 168 mW. Output-current loss adds to this value. Place the SOIC on modest copper area and evaluate its junction-temperature rise under the maximum expected supply voltage and load current. Keep heat-generating regulators and other high-power components away from the amplifier to preserve operating margin.

Treat the AD8017ARZ as a current-feedback amplifier and use the manufacturer's recommended feedback resistor rather than choosing resistance solely from a voltage-feedback gain equation. Cable and transformer capacitance can create additional reactive load, so evaluate gain-bandwidth behavior with the actual line connected. Add output isolation only as directed by the application guidance, and minimize probe-loop area because test fixtures can otherwise distort measured distortion and settling behavior.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Yes
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Analog Devices identifies AD8017ARZ and AD8017ARZ-REEL as lead-free package options. No explicit RoHS, REACH, halogen-free, or conflict-minerals statement was identified for this exact ordering code.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AD8017ARZ datasheet AD8017ARZ datasheet pdf AD8017ARZ pinout AD8017ARZ 8-SOIC AD8017ARZ xDSL line driver AD8017ARZ 7mA amplifier AD8017ARZ output current AD8017ARZ equivalent AD8017ARZ replacement AD8017ARZ vs AD8014ARZ AD8017ARZ vs AD8018AR-REEL ad8017arz reel7 Analog Devices AD8017ARZ AD8017ARZ price

संबंधित कंपोनेंट्स और शब्द

Analog Devices AD8017ARZ AD8017AR AD8014ARZ AD8018AR-REEL AD8019ARZ AD8017AR-EVAL dual operational amplifier current-feedback amplifier high-speed amplifier signal-conditioning IC xDSL CPE single-supply operation output current quiescent current output swing low distortion capacitive-load drive twisted-pair cable driver feedback resistor 8-lead SOIC surface-mount package lead-free packaging xDSL line driver panel reference driver
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें