AD8017ARZ - Dual High-Speed 200mA Op Amp | Analog Devices
N.º da peça: AD8017ARZ ✓ AtivoAD8017ARZ Visão geral
An operational amplifier is an analog signal-conditioning IC that amplifies the voltage difference between its inverting and non-inverting inputs while providing high input impedance, low output impedance, and controlled gain. The AD8017 belongs to the current-feedback operational-amplifier family, where the feedback network and closed-loop gain determine bandwidth. Its place in the broader hierarchy is operational amplifier, analog amplifier, and then signal-chain integrated circuit.
The AD8017's principal advantages are its dual-channel configuration, 7 mA supply current per amplifier, and high output-current capability of typically 200 mA per channel. These characteristics allow one compact package to serve two independent xDSL transmission paths. The device can drive the customer-premises-equipment end of a twisted-pair line, where low distortion, generous output swing, and load-drive capability determine signal integrity.
Internally, the AD8017 uses a current-feedback topology rather than the voltage-feedback architecture found in many general-purpose precision amplifiers. This topology supports high-speed operation while maintaining low distortion when driving resistive and capacitive loads. The manufacturer identifies the AD8017 as a low-cost dual amplifier intended specifically for single-supply xDSL systems, where low distortion and low system cost are essential.
Typical uses include xDSL CPE transmitters, line-driver stages, twin-ended cable outputs, and panel or reference-driver circuits requiring capacitive-load drive. The 8-lead SOIC construction also simplifies assembly in cost-sensitive communications equipment. Because the amplifier is optimized around a +12 V supply, the exact operating limits, gain-bandwidth relationship, and stable capacitive-load range should be confirmed in the manufacturer datasheet before finalizing a new design.
Design attention should focus on supply decoupling, feedback-component selection, and output-stage stability. Place the bypass capacitor close to the supply pins, keep feedback traces short, and confirm that the driven load and cable capacitance remain within the amplifier's documented operating region. Probe points and test loops should also be minimized because parasitic capacitance can alter the current-feedback response.
This page combines manufacturer product information, distributor records, drop-in replacement analysis, application guidance, and design notes in one engineering reference. It highlights where the AD8017ARZ fits in xDSL and cable-driver designs, distinguishes closely related Analog Devices options, and identifies the parameters that must be verified before a second-source substitution is approved.
Alternativas drop-in para AD8017ARZ — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.
Variantes desta série
Modelos da mesma série compatíveis como drop-in com AD8017ARZ (mesmo formato e footprint) — diferindo em Package, Primary Application, Product Type.
AD8017AR
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AD8014ARZ
✅ Drop-InConsulte o preço
Ver ficha técnica →AD8018AR-REEL
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AD8019ARZ
✅ Drop-In📋 Alternativa de referência (fora do catálogo)
AD8017ARZ Classificações máximas e características elétricas
| Amplifier Type | Dual high-speed current-feedback operational amplifier |
| Number of Channels | 2 channels |
| Number of Circuits | 2 circuits |
| Supply Current per Amplifier | 7 mA |
| Optimized Supply | +12 V |
| Output Current per Amplifier | 200 mA typical |
| Output Swing | Within 1.0 V of the supply rail |
| Maximum Output Swing | 10 V peak-to-peak |
| Load Capability | Low-distortion drive of 100 ohm and capacitive loads |
| Encapsulamento | 8-lead SOIC |
| Contagem de pinos | 8 pins |
| Tipo de montagem | Surface mount |
| Primary Application | Single-supply xDSL CPE line driving |
| Lead-Free Package Option | AD8017ARZ and AD8017ARZ-REEL |
| Evaluation Board | AD8017AR-EVAL |
| Status RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
Guia de Configuração de Pinos do AD8017ARZ ad8017arz and ad8017arz-reel
Configuração de pinos para AD8017ARZ (pacote ad8017arz and ad8017arz-reel). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.
Nenhum dado detalhado de pinagem disponível para AD8017ARZ.
Consulte a ficha técnica para a configuração completa dos pinos.
Aplicações típicas
AD8017ARZ é adequado para 6 aplicaçãos: xDSL CPE Transmit Drivers, Twisted-Pair Cable Driver Outputs, Capacitive Panel Reference Drivers, Single-Supply Industrial Signal Conditioning, Dual-Channel Low-Voltage Communication Front Ends, Video and Instrumentation Buffering Stages.
xDSL CPE Transmit Drivers
The AD8017ARZ is designed for the customer-premises-equipment end of single-supply xDSL systems, where two channels can drive separate transmit paths. Its 200 mA typical output current per amplifier provides the drive needed for low-resistance twisted-pair interfaces, while output swing to within 1.0 V of the supply preserves usable modulation amplitude. Each channel consumes 7 mA, keeping the dual amplifier's nominal supply demand near 14 mA. Place the device close to the transformer or line-coupling network, use short feedback traces, and confirm the actual cable capacitance and load against the manufacturer stability guidance before production release.
Recomendado
Twisted-Pair Cable Driver Outputs
The dual AD8017ARZ fits transmit stages that must deliver low-distortion signals into 100 ohm or other low-impedance cable networks. A typical 10 V peak-to-peak output capability, combined with high output-current drive, helps the amplifier maintain signal integrity as the load current increases. The 8-lead SOIC package supports compact line-interface hardware, and the two independent channels can drive paired or complementary outputs. Compensation for cable capacitance should be selected from the recommended feedback network rather than added arbitrarily at the output, because excessive load capacitance can reduce stability or alter the current-feedback response.
Recomendado
Capacitive Panel Reference Drivers
The AD8017ARZ is appropriate for driving panel-reference and other capacitive loads where output-current capability is more important than extremely low static power. Its approximately 200 mA typical output current gives the amplifier more drive margin than a conventional low-power op amp, while 7 mA consumption per channel supports efficient dual-channel implementation. Use short traces from the amplifier to the load and preserve the manufacturer's recommended feedback impedance. Validate settling time and stability at the highest expected panel capacitance because the load value, not just its DC resistance, determines the usable bandwidth.
Recomendado
Single-Supply Industrial Signal Conditioning
The AD8017ARZ supports +12 V single-supply signal-conditioning systems that need two high-speed channels in one package. Its current-feedback architecture is useful when closed-loop gain and feedback resistance are chosen for a particular signal bandwidth, and the low-distortion output stage handles moderate loads more effectively than a general-purpose amplifier. Decouple the supply pins locally and route the two channels to minimize shared-ground current. Before using the part outside xDSL-style interfaces, verify the allowed supply range, input common-mode limits, output swing, and stability at the intended closed-loop gain in the manufacturer datasheet.
Recomendado
Dual-Channel Low-Voltage Communication Front Ends
Two AD8017ARZ amplifier sections can implement independent transmit or receive-conditioning paths where board area and power are constrained. The 8-lead SOIC footprint simplifies assembly, and the 7 mA per-amplifier specification supports a relatively lean design. Current-feedback amplifiers require deliberate resistor selection around the inverting input, so calculate the feedback network for the target closed-loop gain rather than copying a voltage-feedback resistor ratio. Include isolation resistors where recommended for capacitive loads and verify channel-to-channel settling, output impedance, and distortion with the actual line interface connected.
Recomendado
Video and Instrumentation Buffering Stages
The AD8017ARZ can serve as a low-cost high-speed buffer or driver in instrumentation and video-adjacent circuits that operate from a +12 V rail. Its dual configuration allows matched buffering of two signals, while the high output-current capability helps preserve low distortion into downstream resistive loading. The device is not a general-purpose precision amplifier, so offset, noise, input bias current, and common-mode performance should be checked against the signal chain requirements. Use a source termination or isolation resistor if the connected load presents capacitance, and keep the feedback loop compact to avoid added phase delay.
Recomendado
Resumo dos produtos recomendados
Dados de referência de engenharia para AD8017ARZ — comparação, orientação de projeto e informações de conformidade.
Guia de seleção
Comparação com alternativas
| Parâmetro | Este produto | AD8017AR | AD8014ARZ | AD8018AR-REEL | AD8019ARZ |
|---|---|---|---|---|---|
| Package | 8-lead SOIC | 8-lead SOIC - same | 8-lead SOIC - same | 8-lead SOIC - same | 8-lead SOIC - same |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Configuration | Dual amplifier | Dual amplifier | Dual amplifier | Dual amplifier | Dual amplifier |
| Primary Application | Single-supply xDSL line driving | Single-supply xDSL line driving | High-speed signal amplification | High-speed signal amplification | High-performance signal amplification |
Principais diferenciais
- Higher output-current capability for cable and capacitive loads (vs AD8014ARZ)
- Purpose-built single-supply xDSL optimization (vs AD8018AR-REEL)
- Lower nominal per-channel supply current for dual-channel designs (vs AD8018AR-REEL)
Notas de projeto
Keep the current-feedback loop compact and place the inverting-input feedback components directly beside the relevant amplifier pins. Route each channel separately to prevent output and feedback currents from sharing copper. High-value board resistance adds unintended gain and phase error, particularly at the bandwidth for which the AD8017ARZ is selected. Use a continuous ground plane, and decouple the supply pins with a local high-frequency capacitor plus a larger bulk capacitor positioned near the device.
Do not assume that any 8-lead SOIC amplifier is electrically interchangeable with the AD8017ARZ. The AD8018AR-REEL differs in supply range, quiescent current, output-current capability, and dynamic performance, while the AD8014ARZ and AD8019ARZ are positioned differently within the family. Validate closed-loop gain, bandwidth, output swing, stability with the actual capacitive load, and power consumption against the manufacturer datasheets before approving a substitution.
Estimated: with both amplifiers active at the 7 mA per-amplifier operating point and a +12 V supply, the supply-related internal dissipation is about 168 mW. Output-current loss adds to this value. Place the SOIC on modest copper area and evaluate its junction-temperature rise under the maximum expected supply voltage and load current. Keep heat-generating regulators and other high-power components away from the amplifier to preserve operating margin.
Treat the AD8017ARZ as a current-feedback amplifier and use the manufacturer's recommended feedback resistor rather than choosing resistance solely from a voltage-feedback gain equation. Cable and transformer capacitance can create additional reactive load, so evaluate gain-bandwidth behavior with the actual line connected. Add output isolation only as directed by the application guidance, and minimize probe-loop area because test fixtures can otherwise distort measured distortion and settling behavior.
Informações de conformidade
Analog Devices identifies AD8017ARZ and AD8017ARZ-REEL as lead-free package options. No explicit RoHS, REACH, halogen-free, or conflict-minerals statement was identified for this exact ordering code.