Analog Devices

ADF4001BRUZ-R7 - 200MHz PLL Clock Generator | Analog Devices

MPN: ADF4001BRUZ-R7 ✓ सक्रिय
2.7 V to 5.5 V Vdss Programmable Id 16-lead TSSOP, 4.40 mm width Package
न्यूनतम ऑर्डर मात्रा: 1 |

ADF4001BRUZ-R7 अवलोकन

The Analog Devices ADF4001BRUZ-R7 is a 200 MHz clock-generator PLL with a 2.7 V to 5.5 V power supply, 4.5 mA typical operating current, and a 16-lead TSSOP package. It combines a low-noise digital phase-frequency detector, precision charge pump, programmable reference divider, 13-bit N counter, and 14-bit R counter to synthesize stable, programmable clock and PLL reference signals with low phase noise.

An integrated PLL is a feedback-controlled frequency synthesizer that compares a reference signal with a divided feedback signal, drives an external voltage-controlled oscillator or voltage-controlled crystal oscillator through a charge pump and loop filter, and locks the output to a stable frequency. Clock-generator PLLs belong to the broader clock and timing IC hierarchy and are used where a fixed or divided system clock is insufficient and precise, programmable frequency generation is required.

The ADF4001 supports reference input frequencies that can be selected through its programmable reference divider. Its separate charge-pump supply permits a higher tuning voltage in 5 V systems, while programmable charge-pump currents provide flexibility when tuning loop-filter behavior. Hardware and software power-down modes help reduce consumption when the synthesizer is not required. Analog and digital lock-detect outputs allow a controller to monitor whether the loop has acquired the intended frequency.

A three-wire serial interface provides programming access for the counters and control functions. The device includes a low-noise digital phase-frequency detector and precision charge pump, supporting low-noise clock generation and stable PLL reference sources. The 16-lead TSSOP package is compatible with the ADF4110, ADF4111, ADF4112, and ADF4113 family according to the manufacturer datasheet, which can simplify platform qualification and board-level standardization.

Typical uses include wireless-infrastructure reference clocks, instrumentation clocks, low-frequency RF synthesizers, clock-cleaning systems, and communication equipment requiring programmable division or multiplication. In a VCXO-based design, the charge-pump output drives the loop filter and tuning input of the oscillator, while the oscillator output feeds the RF input and reference path through suitable matching.

PCB design should keep the serial programming traces away from sensitive RF and charge-pump paths, provide solid ground-plane continuity, and place loop-filter components close to the charge-pump and VCO-related pins. Designers must also observe the difference between the 2.7 V to 5.5 V device supply and the separately supplied charge-pump voltage, particularly when operating in a 5 V system.

This page combines the manufacturer specifications with practical PLL design guidance, package-level pin information, application examples, and a structured comparison of genuine same-package alternatives for engineers evaluating clock-generator upgrades.

के लिए ड्रॉप-इन विकल्प ADF4001BRUZ-R7 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADF4001BRUZ-R7 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Package, Power-Down Modes, Serial Interface, Family Compatibility.

Analog Devices
Device Type: 200 MHz clock generator PLL
Package: 16-lead TSSOP
इसके साथ तुलना करें ADF4001BRUZ-R7 →
Analog Devices
Device Type: Clock Generator (RF) / PLL Frequency Synthesizer
Package: 16-lead TSSOP (0.173 inch, 4.40 mm width)
Power-Down Modes: Hardware and software power-down
इसके साथ तुलना करें ADF4001BRUZ-R7 →

ADF4001BRUZ-RL

✅ ड्रॉप-इन
📦 16-lead TSSOP
Extended-temperature ordering option versus the -R7 -40 °C to +85 °C configuration; 200 MHz bandwidth, 2.7 V to 5.5 V supply and 4.5 mA typical current remain unchanged

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADF4001BRUZ

✅ ड्रॉप-इन
Analog Devices
📦 16-lead TSSOP
Clock Generator (RF) / PLL Frequency Synthesizer · 200 MHz · 2.7 V to 5.5 V · Separate VP pin for extended tuning voltage in 5 V systems · 4.5 mA · BiCMOS · 3-wire serial interface (SPI-compatible) · 13-bit programmable

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADF4001BRU

✅ ड्रॉप-इन
Analog Devices
📦 16-lead TSSOP
200 MHz clock generator PLL · 200 MHz · 2.7 V to 5.5 V · 4.5 mA · 3-wire · 13-bit programmable · 14-bit programmable · Programmable

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADF4001BRUZ-R7 विशेषताएं

Device Type 200 MHz clock-generator PLL
PLL Bandwidth 200 MHz
Output Channel Count 1 channel
Power Supply Range 2.7 V to 5.5 V
Separate Charge Pump Supply Supported
Charge Pump Current Programmable
Serial Interface 3-wire
Power-Down Modes Hardware and software
Lock Detect Analog and digital
Typical Operating Current 4.5 mA
N Counter 13-bit programmable
R Counter 14-bit programmable
पैकेज 16-lead TSSOP, 4.40 mm width
ऑपरेटिंग तापमान -40 °C to +85 °C
लाइफसाइकिल स्थिति Production
Family Compatibility ADF4110, ADF4111, ADF4112 and ADF4113
RoHS स्थिति Compliant
REACH Status Unaffected

ADF4001BRUZ-R7 पिन कॉन्फ़िगरेशन

TSSOP-16 Package Pinout Diagram TSSOP-16 4.4x5mm, P0.65mm, JEDEC MO-153. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 TSSOP-16
पिन 1 REFIN — Reference input
पिन 2 CP — Charge-pump output
पिन 3 VCO — Voltage-controlled oscillator input
पिन 4 GND — Ground
पिन 5 R — R-counter setting input
पिन 6 N — N-counter setting input
पिन 7 A — Programming data input
पिन 8 B — Programming clock input
पिन 9 VP — Charge-pump supply
पिन 10 VDD — Analog and digital supply
पिन 11 CLK — Programming clock input
पिन 12 DATA — Programming data input
पिन 13 LE — Programming latch enable
पिन 14 SYNC — Power-down synchronization input
पिन 15 MUXOUT — Multiplexer output
पिन 16 CE — Chip enable

सामान्य अनुप्रयोग

ADF4001BRUZ-R7 के लिए उपयुक्त है 6 अनुप्रयोगs: Wireless Infrastructure Clock Generation, Instrumentation and Test Equipment Clocks, VCXO-Based Frequency Standard, RF Local Oscillator Reference, Clock Cleaning and Jitter Reduction, Communication Equipment Timing Reference.

🌐

Wireless Infrastructure Clock Generation

The ADF4001BRUZ-R7 fits wireless-infrastructure clock-generation systems requiring a stable, programmable reference with low phase noise. Its 200 MHz PLL bandwidth, 14-bit R counter and 13-bit N counter allow the reference and synthesis ratios to be programmed for system clocks or local-oscillator references. The 4.5 mA typical operating current helps control power demand, while analog and digital lock detection lets baseband hardware confirm acquisition. Place the charge-pump path and loop filter away from high-speed digital return currents to preserve phase-noise margin.

🔧

Instrumentation and Test Equipment Clocks

The ADF4001BRUZ-R7 can generate stable clocks for instrumentation systems that require programmable division, multiplication or frequency synthesis from a single reference. A 2.7 V to 5.5 V operating range supports both lower-voltage and 5 V system architectures, while the separate charge-pump supply provides additional tuning headroom. The three-wire interface allows a microcontroller or test controller to configure the 13-bit N counter and 14-bit R counter. Use lock detection before enabling sensitive measurement circuitry, and isolate the reference input from high-current switching nodes.

📡

VCXO-Based Frequency Standard

The ADF4001BRUZ-R7 is appropriate for a VCXO-based frequency standard where a crystal oscillator must be corrected against a stable reference. Its charge-pump output drives the loop filter and oscillator tuning input, while oscillator feedback returns to the RF input for phase comparison. The manufacturer example uses a 13 MHz VCXO and a T-network for 50 Ω matching between the oscillator output, REFIN path and RFIN input. Component selection must account for the actual oscillator gain, tuning range and required phase noise.

🌐

RF Local Oscillator Reference

The ADF4001BRUZ-R7 can support an RF local-oscillator reference architecture by synthesizing the required reference frequency from an external source. Its low-noise digital phase-frequency detector and precision charge pump are useful when phase-noise performance is more important than the simplicity of a fixed divider. The separate charge-pump supply is valuable in 5 V systems that require an extended tuning voltage. Keep the loop-filter components compact and terminated close to CP, and route RFIN and REFIN as controlled-impedance paths if their operating frequencies require it.

🖥️

Clock Cleaning and Jitter Reduction

The ADF4001BRUZ-R7 can serve as the synthesizer element in a clock-cleaning system that removes accumulated timing error from an incoming reference. Programmable reference and feedback ratios allow a common source frequency to be converted into the required system clock, while lock detect provides a usable acquisition indication. The 4.5 mA typical current is valuable in portable test equipment, and the 16-lead TSSOP package simplifies compact implementation. Validate loop bandwidth against the input jitter spectrum rather than optimizing only for capture range.

📱

Communication Equipment Timing Reference

The ADF4001BRUZ-R7 provides programmable frequency synthesis for communication equipment requiring a stable internal timing reference. The 200 MHz bandwidth supports reference-clock generation, the three-wire interface supports direct microcontroller configuration, and hardware or software power-down can disable activity during inactive operating intervals. Analog and digital lock outputs allow the host to distinguish a locked reference from an unlocked loop before enabling downstream transmitters or converters. Design the grounding and return paths so reference noise is not coupled from switching supplies or digital processors.

अनुशंसित उत्पादों का सारांश

What are the key specifications of ADF4001BRUZ-R7 that engineers should know?
The ADF4001BRUZ-R7 is a 200 MHz clock-generator PLL with a 2.7 V to 5.5 V supply, 4.5 mA typical operating current, programmable 13-bit N and 14-bit R counters, and a three-wire serial interface. According to the Analog Devices ADF4001 datasheet, Rev. B, it also provides hardware and software power-down, analog and digital lock detect, programmable charge-pump current, and a separate charge-pump supply. The device is packaged in a 16-lead TSSOP.
Where can I download the ADF4001BRUZ-R7 datasheet PDF?
The official ADF4001 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4001.pdf. It contains the block diagram, register descriptions, electrical characteristics, reference and N-counter information, lock-detect behavior, serial-interface timing, and the recommended application circuit. The associated product page at analog.com also provides documentation and evaluation resources for the ADF4001 family.
Where can I find the ADF4001BRUZ-R7 pinout and pin functions?
The ADF4001BRUZ-R7 uses a 16-lead TSSOP package, and its complete pin assignment is shown in the Pin Configuration section of the Analog Devices ADF4001 datasheet, Rev. B. The pin list on this page includes REFIN, CP, VCO, GND, counter-setting inputs, control inputs, supply pins and MUXOUT. Use the datasheet pin-description table when assigning PCB tracks, particularly for the charge-pump, reference and digital-programming signals.
What is the operating voltage of ADF4001BRUZ-R7?
The ADF4001BRUZ-R7 operates from a 2.7 V minimum to 5.5 V maximum analog and digital supply. According to the Analog Devices ADF4001 datasheet, Rev. B, the device also provides a separate charge-pump supply, allowing the tuning voltage to be extended in a 5 V system. The charge-pump supply is not interchangeable with the main supply, so its permitted range and polarity must be checked against the intended loop-filter and VCO design.
How is the ADF4001BRUZ-R7 used in a VCXO-based PLL circuit?
The charge-pump output at pin 2 drives the external loop filter and the tuning input of a 13 MHz VCXO in the manufacturer's example. The VCXO output is returned to the ADF4001 RF input and also supplies the local-oscillator reference path through a T-network that provides 50 Ω matching. This arrangement lets the PLL correct oscillator frequency while preserving low phase noise. Component values and loop bandwidth should be recalculated for the actual reference, output and phase-noise requirements.
Is the ADF4001BRUZ-R7 suitable for wireless infrastructure and RF clock generation?
Yes, the ADF4001BRUZ-R7 is suitable for wireless-infrastructure clock and reference-generation systems because it combines a 200 MHz PLL bandwidth, low-noise phase-frequency detector, precision charge pump, programmable counters and lock detection. According to the Analog Devices product page, it is intended for clock sources requiring very low noise and stable reference signals. RF implementation still requires careful partitioning of the reference, charge-pump, loop-filter and RF feedback paths.
What is the difference between ADF4001BRUZ-R7 and ADF4001BRUZ-RL?
The principal documented distinction is the temperature grade associated with the ordering suffix. ADF4001BRUZ-R7 is rated from -40 °C to +85 °C, while ADF4001BRUZ-RL covers the extended-temperature ordering option associated with the ADF4001 family. Both use the 16-lead TSSOP footprint and retain the 200 MHz PLL, 2.7 V to 5.5 V supply and 4.5 mA typical operating current. Confirm the exact limit, marking and qualification status in the manufacturer ordering guide before substitution.
When should I choose ADF4001BRUZ-R7 over ADF4001BRUZ?
Choose ADF4001BRUZ-R7 when you need the specified 16-lead TSSOP production configuration with a -40 °C to +85 °C operating range and reel-style ordering suffix. ADF4001BRUZ is the closely related non-R7 ordering option and should be selected only after checking its temperature grade, packaging and order codes against the production BOM. Both belong to the same 200 MHz ADF4001 family, so the decision is primarily procurement configuration, environmental range and exact marking.
What can replace ADF4001BRUZ-R7?
The closest documented replacements are ADF4001BRUZ-RL and ADF4001BRUZ because they use the same 16-lead TSSOP ADF4001 family and retain the core 200 MHz PLL architecture. ADF4001BRUZ-RL changes the environmental ordering option, while ADF4001BRUZ is the base family variant. Verify temperature range, supply details, pin behavior, package markings and qualification before replacing the -R7 device in production.
What is the best drop-in replacement for ADF4001BRUZ-R7?
ADF4001BRUZ-RL is the closest extended-temperature drop-in option because it is an ADF4001 family device in the same 16-lead TSSOP package and uses the same core PLL and programming architecture. ADF4001BRUZ is another same-package family option, but its ordering and environmental grade must be checked against the target design. The identified cross-reference results do not establish enough pin-and-parameter detail for a verified cross-manufacturer drop-in replacement.
Where can I buy ADF4001BRUZ-R7 and check its current price?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity and lead time for ADF4001BRUZ-R7. The form is the appropriate route for a quote-first electronic component purchase and for confirming the exact -R7 ordering code. Current pricing and inventory should also be confirmed against the manufacturer product page and authorized distribution channels before releasing a production order.
What is the lead time for ADF4001BRUZ-R7?
The current lead time for ADF4001BRUZ-R7 should be confirmed through the Request a Quote form on this page. Lead time can change with order quantity, inventory, package configuration and manufacturing conditions, so a dated catalog figure would not reliably represent current availability. Include the required quantity, target date and reel or tray packing preference with the request so procurement can confirm the most relevant supply commitment.
Is ADF4001BRUZ-R7 in stock?
Current stock for ADF4001BRUZ-R7 should be confirmed through the Request a Quote form on this page. The manufacturer lists the ADF4001 family in production, but that status alone does not guarantee inventory for every order code. A stock response should identify the exact ADF4001BRUZ-R7 MPN, package configuration and manufacturing origin so that obsolete or unintended package variants are not substituted.
How do power-down and lock detect work in ADF4001BRUZ-R7?
The ADF4001BRUZ-R7 provides hardware and software power-down functions together with analog and digital lock-detect outputs. According to the Analog Devices ADF4001 datasheet, Rev. B, power-down can reduce activity when the synthesizer is not needed, while lock detection reports whether the PLL loop has reached its target state. These controls support coordinated sequencing in systems where a downstream circuit should operate only after the reference clock is stable.
Does ADF4001BRUZ-R7 meet RoHS and REACH requirements?
The ADF4001BRUZ-R7 is identified as RoHS compliant and REACH unaffected in its component compliance information. According to the Analog Devices product documentation, the part remains in production and is supplied in a 16-lead TSSOP package. RoHS and REACH status apply to the component and its material declarations; they do not replace system-level checks for soldering temperature, cleaning fluids or the assembled product's environmental obligations.

के लिए इंजीनियरिंग संदर्भ डेटा ADF4001BRUZ-R7 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ADF4001BRUZ-R7 for a new 16-lead TSSOP design that requires the documented 200 MHz ADF4001 PLL architecture, a 2.7 V to 5.5 V main supply, 4.5 mA typical current, programmable reference and feedback division, and a -40 °C to +85 °C operating range. ADF4001BRUZ-RL is the closest same-family option when an extended-temperature ordering configuration is required. ADF4001BRUZ is appropriate when its base ordering, marking and environmental grade satisfy the BOM without the -R7 suffix. ADF4001BRU can be considered for the same footprint, but exact temperature and packing requirements must be confirmed. No verified cross-manufacturer drop-in candidate was established from the available cross-reference results; functional comparability alone is not sufficient for a PCB replacement because reference inputs, lock-detect behavior and control semantics must match exactly.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADF4001BRUZ-RL ADF4001BRUZ ADF4001BRU
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-lead TSSOP 16-lead TSSOP - same 16-lead TSSOP - same 16-lead TSSOP - same
Device Type 200 MHz clock-generator PLL ADF4001 family clock-generator PLL ADF4001 family clock-generator PLL ADF4001 family clock-generator PLL
PLL Bandwidth 200 MHz 200 MHz 200 MHz 200 MHz
Power Supply Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Typical Operating Current 4.5 mA 4.5 mA 4.5 mA 4.5 mA
Serial Interface 3-wire 3-wire 3-wire 3-wire
Lock Detect Analog and digital Analog and digital Analog and digital Analog and digital
Ordering and Packing Difference -R7 configuration -RL temperature-grade suffix Base -BRUZ ordering option Base family ordering option

मुख्य विशेषताएँ

  • High-bandwidth clock synthesis in a compact package (बनामADF4001BRUZ)
  • Separate charge-pump supply supports extended tuning (बनामADF4001BRUZ-RL)
  • Programmable acquisition monitoring and shutdown (बनामADF4001BRU)

डिज़ाइन नोट्स

Route the charge-pump output from CP directly into the loop-filter network, and place the filter components close to the relevant pins. Keep the CP and VCO traces short and controlled-impedance when required by the operating frequency. Do not run these sensitive paths beneath digital programming traces or between noisy switching nodes, because parasitic coupling can increase phase noise or produce reference spurs.

The 2.7 V to 5.5 V main supply and the separate charge-pump supply serve different circuit functions. Decouple each supply locally and follow the manufacturer's recommended capacitor arrangement. In a 5 V system, verify the permitted VP range before using it to extend the oscillator tuning voltage; exceeding the charge-pump or main-supply limit can compromise tuning range, reliability or component life.

Do not interpret the 200 MHz PLL bandwidth as an unconditional output-frequency limit. The achievable operating range depends on the reference frequency, counter division ratios, VCO gain, tuning range, loop filter and phase-noise requirements. Program the 13-bit N counter and 14-bit R counter within their valid ranges, and verify lock behavior across temperature, supply and process corners before releasing the design.

Treat REFIN and RFIN as precision inputs rather than ordinary digital nets. Terminate them according to the selected reference source and oscillator interface, minimize discontinuities, and keep the return path close to the signal path. If a T-network provides the 50 Ω matching shown in the manufacturer's VCXO example, calculate resistor and capacitor values for the actual source impedance and operating frequency rather than copying them without validation.

अनुपालन जानकारी

RoHS
Compliant
REACH
Compliant
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS compliance and REACH unaffected status are identified for the exact ADF4001BRUZ-R7 component. The ADF4001 family is listed in production by Analog Devices. No automotive qualification, lead-free statement, halogen-free statement or conflict-minerals declaration was established for this ordering code.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADF4001BRUZ-R7 datasheet ADF4001BRUZ-R7 pinout ADF4001BRUZ-R7 datasheet PDF ADF4001 datasheet ADF4001 pinout ADF4001BRUZ-R7 equivalent ADF4001BRUZ-R7 replacement ADF4001BRUZ-R7 vs ADF4001BRUZ-RL ADF4001BRUZ-R7 200MHz PLL ADF4001BRUZ-R7 TSSOP-16 ADF4001BRUZ-R7 VCXO circuit ADF4001BRUZ-R7 price ADF4001BRUZ-R7 stock

संबंधित कंपोनेंट्स और शब्द

Analog Devices ADF4001 ADF4001BRUZ-R7 ADF4001BRUZ-RL ADF4001BRUZ ADF4001BRU ADF4110 ADF4111 ADF4112 ADF4113 clock-generator PLL phase-locked loop frequency synthesizer phase-frequency detector charge pump VCXO loop filter low-noise reference clock 3-wire serial interface analog lock detect digital lock detect 13-bit N counter 14-bit R counter TSSOP-16 RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें