ADF4360-5BCP - 1.3 GHz Integer-N Synthesizer | Analog Devices
MPN: ADF4360-5BCP ✓ सक्रियADF4360-5BCP अवलोकन
An integer-N frequency synthesizer combines a phase-locked loop, frequency divider, and voltage-controlled oscillator to generate a stable RF output. The VCO supplies the high-frequency reference within the tuning system, while the synthesizer locks that signal to a stable reference. The ADF4360-5 integrates these functions to support RF clock generation, local oscillator creation, and frequency conversion within communications and signal-processing equipment.
The principal feature of the ADF4360-5 is its integrated RF VCO for the 1300 MHz-centered design range. Its divide-by-2 operating mode provides a second output range from 600 MHz to 700 MHz. This combination allows one synthesizer to support RF signals in both the 1.15 GHz to 1.4 GHz class and the lower 600 MHz to 700 MHz class, subject to the register settings and external support circuitry selected for the design.
All on-chip registers are accessed through a simple three-wire interface. This architecture reduces the number of control connections required when the synthesizer is paired with a microcontroller, embedded processor, or dedicated serial controller. The 24-WFQFN exposed-pad package provides a compact surface-mount implementation, while the exposed pad provides the thermal connection needed when operating across the device's frequency range.
Typical uses include local oscillator generation in RF communications equipment, clocking for mixers and converters, test-and-measurement signal sources, and frequency-generation stages in industrial or wireless systems. In each case, the reference frequency, loop filter, output power, and register configuration determine whether the synthesized output meets the application's phase-noise, tuning, and output-level requirements.
PCB implementation should preserve the layout and grounding practices associated with the exposed-pad package. The three-wire control signals require suitable trace routing, and the RF output path should use controlled impedance and short return paths. The power and ground connections must provide low-impedance distribution because resistance and inductance in those paths can affect oscillator behavior and phase noise.
This product record combines the manufacturer's functional description with distributor package and ordering information. It also organizes practical sourcing questions, pin-compatible alternatives, application guidance, and the design considerations that matter when integrating a high-frequency integer-N synthesizer.
के लिए ड्रॉप-इन विकल्प ADF4360-5BCP — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
ADF4360-5BCPZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADF4360-5BCP विशेषताएं
| Device Type | Fully integrated integer-N synthesizer and VCO |
| Design Center Frequency | 1300 MHz |
| Maximum RF Output Frequency | 1.4 GHz |
| Divide-by-2 Output Range | 600 MHz to 700 MHz |
| Frequency Synthesis Architecture | Integer-N |
| Oscillator Type | Integrated voltage-controlled oscillator |
| Control Interface | 3-wire serial interface |
| पैकेज | 24-WFQFN exposed-pad CSP |
| पिन काउंट | 24 pins |
| माउंटिंग प्रकार | Surface mount |
| Number of RF Outputs | 1 |
ADF4360-5BCP 24-wfqfn exposed-pad csp पिन कॉन्फ़िगरेशन गाइड
ADF4360-5BCP (24-wfqfn exposed-pad csp पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADF4360-5BCP.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ADF4360-5BCP के लिए उपयुक्त है 6 अनुप्रयोगs: RF Local Oscillator Generation, RF Mixer and Converter Clocks, Wireless Transmitter Reference, RF Test and Measurement Source, Wireless Sensor Node Carrier, Industrial RF Signal Generator.
RF Local Oscillator Generation
The ADF4360-5BCP is appropriate for generating a local oscillator around the 1300 MHz design center in RF transmitters, receivers, and converters. Its integrated integer-N synthesizer and VCO consolidate the feedback oscillator and frequency-generation functions into one 24-WFQFN device, while the three-wire interface allows compact control from a microcontroller. With the device configured for a 1.4 GHz-class output, the resulting reference can drive a mixer or downstream RF stage. The primary design checks are reference stability, loop-filter selection, output power, and controlled-impedance routing at the RF output.
अनुशंसित
RF Mixer and Converter Clocks
The ADF4360-5BCP can provide the synthesized reference used by an RF mixer, downconverter, or upconverter operating near the 1300 MHz center region. Integrating the VCO with the integer-N synthesizer reduces the number of discrete frequency-generation sections needed around the converter. The divide-by-2 mode additionally covers 600 MHz to 700 MHz, which can suit lower-frequency converter arrangements. Engineering evaluation should verify the required LO frequency against the device's tuning tables and then tune the loop filter for the application's reference and phase-noise requirements.
अनुशंसित
Wireless Transmitter Reference
A wireless transmitter requiring a stable RF reference near 1300 MHz can use the ADF4360-5BCP as an integrated frequency-generation block. The 1.4 GHz maximum output covers the upper portion of the intended RF class, while the three-wire control path simplifies integration with transmitter control logic. The synthesizer architecture allows the output frequency to be established through on-chip register settings. Before deployment, engineers should confirm phase noise, spur performance, output power, and reference purity against transmitter masks because those system requirements determine acceptable loop-filter and filtering configurations.
अनुशंसित
RF Test and Measurement Source
The ADF4360-5BCP supports compact RF test sources and stimulus-generation equipment requiring a local oscillator around 1300 MHz. Integrating the integer-N synthesizer and VCO allows the instrument to generate a digitally controlled RF reference without a separate oscillator assembly. The 600 MHz to 700 MHz divide-by-2 range broadens its usefulness for test planes operating below the main RF band. Instrument designers should use the manufacturer tuning, output-power, and phase-noise tables to select register settings and then add suitable output filtering when spur levels must meet the measurement path's requirements.
अनुशंसित
Wireless Sensor Node Carrier
The ADF4360-5BCP can supply a synthesized RF reference in a wireless sensor node that also performs local mixing, frequency conversion, or coherent signal generation. Its compact 24-WFQFN exposed-pad package supports integration beside a controller or radio circuit, and the three-wire register interface provides a compact control connection. The 1300 MHz-centered output or the 600 MHz to 700 MHz divided output can serve different RF stages within the node. Power consumption, thermal behavior, output power, and startup settling should be evaluated together because battery-operated and compact equipment must balance RF performance with energy use.
अनुशंसित
Industrial RF Signal Generator
The ADF4360-5BCP is suitable for industrial RF signal-generation modules that require a programmable reference around the 1300 MHz design center. The integer-N architecture supports digital frequency control through the three-wire interface, while the integrated VCO reduces board area compared with separate synthesizer and oscillator implementations. The divided 600 MHz to 700 MHz mode can also serve auxiliary RF test or conversion functions. Industrial equipment designers should validate temperature limits, long-term frequency stability, electromagnetic compatibility, and thermal performance across the complete enclosure and operating environment before production release.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ADF4360-5BCP — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ADF4360-5BCPZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-WFQFN exposed-pad CSP | 24-WFQFN exposed-pad CSP |
| Device Type | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Design Center Frequency | 1300 MHz | 1300 MHz |
| Maximum RF Output Frequency | 1.4 GHz | 1.4 GHz |
| Divide-by-2 Output Range | 600 MHz to 700 MHz | 600 MHz to 700 MHz |
| Control Interface | 3-wire serial interface | 3-wire serial interface |
| Number of RF Outputs | 1 | 1 |
| Ordering Suffix | BCP | BCPZ |
मुख्य विशेषताएँ
- Matches the identified same-frequency-band ordering option (बनामADF4360-5BCPZ)
- Provides integrated VCO and integer-N synthesis (बनामADF4360-5BCPZ)
- Supports two useful RF output classes (बनामADF4360-5BCPZ)
डिज़ाइन नोट्स
Use the exposed pad as a low-impedance ground and thermal connection. Follow the manufacturer package and land-pattern dimensions rather than estimating the pad geometry from the package name. Keep the exposed-pad vias close to the thermal pad and preserve an uninterrupted ground return beneath the device. This is especially important for an RF VCO because parasitic inductance and resistance in the supply return can degrade oscillator behavior and phase noise.
Route the three-wire control interface away from the RF output and VCO region where practical, and provide a stable reference connection with short return paths. The RF output should use controlled impedance and a compact connection to the following RF stage. Avoid long ground-plane interruptions beneath the VCO section. Include the loop-filter components near the relevant synthesizer nodes as directed by the reference design, because long feedback traces can increase phase-noise and spur issues.
Do not treat the 600 MHz to 700 MHz divided range as an automatic substitute for the normal 1.15 GHz to 1.4 GHz operating class. Select the divider, output path, loop settings, and surrounding filtering for the intended frequency. Also verify the ADF4360-5BCP ordering code, temperature grade, and packing configuration before releasing a production order, particularly when comparing it with the ADF4360-5BCPZ ordering option.
अनुपालन जानकारी
Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral declarations for the exact ordering code with Analog Devices before production release.