Analog Devices

ADF4360-5BCP - 1.3 GHz Integer-N Synthesizer | Analog Devices

部品番号: ADF4360-5BCP ✓ 生産中
24-WFQFN exposed-pad CSP Package 1300 MHz Speed
MOQ: 1 |

ADF4360-5BCP 概要

Analog Devices ADF4360-5BCP is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator with a 1300 MHz design center frequency, an RF output range extending to 1.4 GHz, and a divide-by-2 output covering 600 MHz to 700 MHz. The device is housed in a 24-lead WFQFN exposed-pad package and uses a three-wire register interface.

An integer-N frequency synthesizer combines a phase-locked loop, frequency divider, and voltage-controlled oscillator to generate a stable RF output. The VCO supplies the high-frequency reference within the tuning system, while the synthesizer locks that signal to a stable reference. The ADF4360-5 integrates these functions to support RF clock generation, local oscillator creation, and frequency conversion within communications and signal-processing equipment.

The principal feature of the ADF4360-5 is its integrated RF VCO for the 1300 MHz-centered design range. Its divide-by-2 operating mode provides a second output range from 600 MHz to 700 MHz. This combination allows one synthesizer to support RF signals in both the 1.15 GHz to 1.4 GHz class and the lower 600 MHz to 700 MHz class, subject to the register settings and external support circuitry selected for the design.

All on-chip registers are accessed through a simple three-wire interface. This architecture reduces the number of control connections required when the synthesizer is paired with a microcontroller, embedded processor, or dedicated serial controller. The 24-WFQFN exposed-pad package provides a compact surface-mount implementation, while the exposed pad provides the thermal connection needed when operating across the device's frequency range.

Typical uses include local oscillator generation in RF communications equipment, clocking for mixers and converters, test-and-measurement signal sources, and frequency-generation stages in industrial or wireless systems. In each case, the reference frequency, loop filter, output power, and register configuration determine whether the synthesized output meets the application's phase-noise, tuning, and output-level requirements.

PCB implementation should preserve the layout and grounding practices associated with the exposed-pad package. The three-wire control signals require suitable trace routing, and the RF output path should use controlled impedance and short return paths. The power and ground connections must provide low-impedance distribution because resistance and inductance in those paths can affect oscillator behavior and phase noise.

This product record combines the manufacturer's functional description with distributor package and ordering information. It also organizes practical sourcing questions, pin-compatible alternatives, application guidance, and the design considerations that matter when integrating a high-frequency integer-N synthesizer.

ドロップイン代替品: ADF4360-5BCP — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

ADF4360-5BCPZ

✅ ドロップイン
📦 24-WFQFN exposed-pad CSP
Same ADF4360-5 frequency band and 1.4 GHz maximum RF output; ordering suffix differs by 0 MHz in specified maximum output frequency.

📋 参考代替品(カタログ未掲載)

ADF4360-5BCP 仕様

Device Type Fully integrated integer-N synthesizer and VCO
Design Center Frequency 1300 MHz
Maximum RF Output Frequency 1.4 GHz
Divide-by-2 Output Range 600 MHz to 700 MHz
Frequency Synthesis Architecture Integer-N
Oscillator Type Integrated voltage-controlled oscillator
Control Interface 3-wire serial interface
パッケージ 24-WFQFN exposed-pad CSP
ピン数 24 pins
実装タイプ Surface mount
Number of RF Outputs 1

ADF4360-5BCP 24-wfqfn exposed-pad csp ピン配置ガイド

ADF4360-5BCP (24-wfqfn exposed-pad csp パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

ADF4360-5BCP の 24-wfqfn exposed-pad csp パッケージピン配置図

詳細なピン配置データはありません: ADF4360-5BCP.

詳細は データシート をご参照ください。

主な用途

ADF4360-5BCP の用途: 6 件s: RF Local Oscillator Generation, RF Mixer and Converter Clocks, Wireless Transmitter Reference, RF Test and Measurement Source, Wireless Sensor Node Carrier, Industrial RF Signal Generator.

🌐

RF Local Oscillator Generation

The ADF4360-5BCP is appropriate for generating a local oscillator around the 1300 MHz design center in RF transmitters, receivers, and converters. Its integrated integer-N synthesizer and VCO consolidate the feedback oscillator and frequency-generation functions into one 24-WFQFN device, while the three-wire interface allows compact control from a microcontroller. With the device configured for a 1.4 GHz-class output, the resulting reference can drive a mixer or downstream RF stage. The primary design checks are reference stability, loop-filter selection, output power, and controlled-impedance routing at the RF output.

📡

RF Mixer and Converter Clocks

The ADF4360-5BCP can provide the synthesized reference used by an RF mixer, downconverter, or upconverter operating near the 1300 MHz center region. Integrating the VCO with the integer-N synthesizer reduces the number of discrete frequency-generation sections needed around the converter. The divide-by-2 mode additionally covers 600 MHz to 700 MHz, which can suit lower-frequency converter arrangements. Engineering evaluation should verify the required LO frequency against the device's tuning tables and then tune the loop filter for the application's reference and phase-noise requirements.

📶

Wireless Transmitter Reference

A wireless transmitter requiring a stable RF reference near 1300 MHz can use the ADF4360-5BCP as an integrated frequency-generation block. The 1.4 GHz maximum output covers the upper portion of the intended RF class, while the three-wire control path simplifies integration with transmitter control logic. The synthesizer architecture allows the output frequency to be established through on-chip register settings. Before deployment, engineers should confirm phase noise, spur performance, output power, and reference purity against transmitter masks because those system requirements determine acceptable loop-filter and filtering configurations.

🖥️

RF Test and Measurement Source

The ADF4360-5BCP supports compact RF test sources and stimulus-generation equipment requiring a local oscillator around 1300 MHz. Integrating the integer-N synthesizer and VCO allows the instrument to generate a digitally controlled RF reference without a separate oscillator assembly. The 600 MHz to 700 MHz divide-by-2 range broadens its usefulness for test planes operating below the main RF band. Instrument designers should use the manufacturer tuning, output-power, and phase-noise tables to select register settings and then add suitable output filtering when spur levels must meet the measurement path's requirements.

🧩

Wireless Sensor Node Carrier

The ADF4360-5BCP can supply a synthesized RF reference in a wireless sensor node that also performs local mixing, frequency conversion, or coherent signal generation. Its compact 24-WFQFN exposed-pad package supports integration beside a controller or radio circuit, and the three-wire register interface provides a compact control connection. The 1300 MHz-centered output or the 600 MHz to 700 MHz divided output can serve different RF stages within the node. Power consumption, thermal behavior, output power, and startup settling should be evaluated together because battery-operated and compact equipment must balance RF performance with energy use.

🏭

Industrial RF Signal Generator

The ADF4360-5BCP is suitable for industrial RF signal-generation modules that require a programmable reference around the 1300 MHz design center. The integer-N architecture supports digital frequency control through the three-wire interface, while the integrated VCO reduces board area compared with separate synthesizer and oscillator implementations. The divided 600 MHz to 700 MHz mode can also serve auxiliary RF test or conversion functions. Industrial equipment designers should validate temperature limits, long-term frequency stability, electromagnetic compatibility, and thermal performance across the complete enclosure and operating environment before production release.

おすすめ製品の概要

ADF4360-5BCP Analog Devices 使用用途: RF Local Oscillator Generation, RF Mixer and Converter Clocks, Wireless Transmitter Reference, RF Test and Measurement Source, Wireless Sensor Node Carrier, Industrial RF Signal Generator ADF4360-5BCPZ Same-family ordering option for the 1300 MHz-centered design 使用用途: RF Local Oscillator Generation, RF Mixer and Converter Clocks, Wireless Transmitter Reference, RF Test and Measurement Source, Wireless Sensor Node Carrier, Industrial RF Signal Generator
What is the ADF4360-5BCP?
The ADF4360-5BCP is a fully integrated integer-N frequency synthesizer and voltage-controlled oscillator from Analog Devices. It has a 1300 MHz design center frequency, an RF output extending to 1.4 GHz, and a divide-by-2 mode covering 600 MHz to 700 MHz. According to the Analog Devices ADF4360-5 datasheet, the VCO and synthesizer functions are integrated into one 24-lead WFQFN exposed-pad device.
What frequency range does the ADF4360-5BCP generate?
The ADF4360-5BCP is designed around a 1300 MHz center frequency and can produce RF output up to 1.4 GHz. Its divide-by-2 mode provides an output from 600 MHz to 700 MHz. According to the Analog Devices ADF4360-5 datasheet, the exact tuning limits and usable output span should be taken from the VCO tuning and output-frequency tables for the selected divider configuration.
Where can I download the ADF4360-5BCP datasheet PDF?
The official ADF4360-5 datasheet PDF is available from Analog Devices at the manufacturer URL listed on this page. It contains the device description, architectural details, register information, electrical characteristics, pin descriptions, and application information. Use the pin-description table and package drawing in that PDF when assigning PCB nets or verifying exposed-pad connections.
Where can I find the ADF4360-5BCP pinout?
The ADF4360-5BCP pinout is shown in the Analog Devices ADF4360-5 datasheet and its package drawing for the 24-lead WFQFN exposed-pad package. The exposed pad has its own electrical and thermal requirements, so it must not be confused with a numbered signal pin. Use the datasheet pin-description table to identify power, ground, control, and RF connections before laying out the board.
How is the ADF4360-5BCP controlled?
The ADF4360-5BCP is controlled through a three-wire interface that provides access to the on-chip registers. According to the Analog Devices ADF4360-5 datasheet, this interface supports configuration of the synthesizer, VCO, dividers, counters, and output path. The controller must also meet the electrical timing and voltage requirements stated for the device's digital control pins.
What applications suit the ADF4360-5BCP?
The ADF4360-5BCP suits RF local-oscillator generation, mixer and converter clocking, wireless test equipment, and other systems requiring a synthesized output around 1300 MHz. Its integrated integer-N synthesizer and VCO reduce the number of separate frequency-generation blocks. The divide-by-2 mode also supports 600 MHz to 700 MHz RF output requirements when the board and register configuration support that operating mode.
Is the ADF4360-5BCP suitable for a 600 MHz to 700 MHz RF design?
Yes, the ADF4360-5BCP includes a divide-by-2 output mode specified from 600 MHz to 700 MHz. According to the Analog Devices ADF4360-5 datasheet, this mode provides a lower-frequency RF output from the 1300 MHz-centered synthesizer. The design must select the appropriate divider, configure the registers, and preserve adequate RF output power and signal integrity at the selected frequency.
What are the key specifications of ADF4360-5BCP that engineers should know?
The key specifications are a 1300 MHz design center, RF output up to 1.4 GHz, a 600 MHz to 700 MHz divide-by-2 output range, integer-N synthesis, an integrated VCO, a three-wire control interface, and a 24-WFQFN exposed-pad package. These characteristics place the device in the RF and wireless signal-generation category and define its suitability for local-oscillator and clock-generation designs.
What is the best drop-in replacement for ADF4360-5BCP?
The closest ordering-compatible alternative identified for the ADF4360-5BCP is the ADF4360-5BCPZ, which uses the same 24-WFQFN exposed-pad family and 1.4 GHz maximum RF-output class. Its ordering suffix differs, so temperature grade, packing, and purchasing configuration should be checked before substitution. Other ADF4360 frequency-band variants may share the footprint but are not electrically equivalent at the 1300 MHz design center.
Can ADF4360-5BCPZ replace ADF4360-5BCP?
The ADF4360-5BCPZ can be considered a hardware drop-in candidate because it belongs to the same ADF4360-5 family and is listed in the same 24-WFQFN exposed-pad format. Before replacing the ADF4360-5BCP, verify the ordering-code temperature grade, reel or tray configuration, and lead-free requirements. Confirm the complete electrical specifications against the current Analog Devices datasheet.
When should I choose ADF4360-5BCP over another ADF4360 frequency-band variant?
Choose the ADF4360-5BCP when the required output is centered near 1300 MHz or when its 600 MHz to 700 MHz divide-by-2 mode matches the RF design. Other ADF4360 variants target different VCO bands, so their frequency limits are not interchangeable even when the board footprint resembles that of the ADF4360-5BCP. Choose the alternative only when its specified VCO band directly covers the required output.
ADF4360-5BCP vs ADF4360-3BCP: which is better for a 1.3 GHz design?
The ADF4360-5BCP is the appropriate choice for a design centered near 1300 MHz because the manufacturer specifies that 1300 MHz design center and an output extending to 1.4 GHz. The ADF4360-3BCP belongs to a different VCO band. Although the two devices share a related family architecture, selecting the ADF4360-3BCP for a 1.3 GHz requirement would rely on frequency behavior outside its intended band.
ADF4360-5BCP vs ADF4360-8BCPZ: which one matches a 1300 MHz application?
The ADF4360-5BCP is the better match for a 1300 MHz application because its manufacturer-specified design center is 1300 MHz and its maximum RF output is 1.4 GHz. The ADF4360-8BCPZ targets a different VCO band. Package compatibility alone does not make the higher-band device suitable, so the required output frequency and divider configuration must be checked before considering a replacement.
What is the best Analog Devices equivalent for ADF4360-5BCP?
The best Analog Devices ordering-compatible candidate identified is the ADF4360-5BCPZ because it retains the ADF4360-5 frequency band and the 24-WFQFN exposed-pad format. The key difference is the ordering suffix rather than a change in synthesis architecture. Confirm temperature grade, package orientation, and packing details on the manufacturer product page before finalizing the substitution.
Where to buy ADF4360-5BCP online and what is its lead time?
Use the Request a Quote form on this page to request current ADF4360-5BCP availability, pricing, and lead time for the required package and quantity. The current commercial terms are maintained through that request rather than embedded in static product copy. For production planning, request the exact ordering code and required delivery schedule so the quotation reflects the intended configuration.

エンジニアリング参考データ: ADF4360-5BCP — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the ADF4360-5BCP for a compact RF design that requires a synthesized source around the 1300 MHz design center, particularly when the main output must reach 1.4 GHz or the divide-by-2 mode must cover 600 MHz to 700 MHz. Its integrated VCO, integer-N architecture, and three-wire control interface simplify frequency-generation and control stages. The ADF4360-5BCPZ is the closest identified hardware alternative because it retains the same frequency band, maximum output class, and 24-WFQFN exposed-pad format; choose it when its temperature grade and packing configuration fit the production requirements. Other ADF4360 variants should not be treated as equivalents merely because the package looks similar, since their VCO bands differ from the 1300 MHz-centered target. Before finalizing any option, verify the complete tuning range, phase noise, output power, reference requirements, operating temperature, and register behavior against the current Analog Devices datasheet.

代替品との比較

パラメータ この製品 ADF4360-5BCPZ
Brand Analog Devices Analog Devices
Package 24-WFQFN exposed-pad CSP 24-WFQFN exposed-pad CSP
Device Type Integer-N synthesizer with integrated VCO Integer-N synthesizer with integrated VCO
Design Center Frequency 1300 MHz 1300 MHz
Maximum RF Output Frequency 1.4 GHz 1.4 GHz
Divide-by-2 Output Range 600 MHz to 700 MHz 600 MHz to 700 MHz
Control Interface 3-wire serial interface 3-wire serial interface
Number of RF Outputs 1 1
Ordering Suffix BCP BCPZ

主な差別化要因

  • Matches the identified same-frequency-band ordering option (vs ADF4360-5BCPZ)
  • Provides integrated VCO and integer-N synthesis (vs ADF4360-5BCPZ)
  • Supports two useful RF output classes (vs ADF4360-5BCPZ)

設計ノート

Use the exposed pad as a low-impedance ground and thermal connection. Follow the manufacturer package and land-pattern dimensions rather than estimating the pad geometry from the package name. Keep the exposed-pad vias close to the thermal pad and preserve an uninterrupted ground return beneath the device. This is especially important for an RF VCO because parasitic inductance and resistance in the supply return can degrade oscillator behavior and phase noise.

Route the three-wire control interface away from the RF output and VCO region where practical, and provide a stable reference connection with short return paths. The RF output should use controlled impedance and a compact connection to the following RF stage. Avoid long ground-plane interruptions beneath the VCO section. Include the loop-filter components near the relevant synthesizer nodes as directed by the reference design, because long feedback traces can increase phase-noise and spur issues.

Do not treat the 600 MHz to 700 MHz divided range as an automatic substitute for the normal 1.15 GHz to 1.4 GHz operating class. Select the divider, output path, loop settings, and surrounding filtering for the intended frequency. Also verify the ADF4360-5BCP ordering code, temperature grade, and packing configuration before releasing a production order, particularly when comparing it with the ADF4360-5BCPZ ordering option.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral declarations for the exact ordering code with Analog Devices before production release.

データ検証日: 2026-11-10 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

adf4360 1bcpz adf4360 7bcpz adf4360 7bcpzrl7 ADF4360-5BCP datasheet ADF4360-5BCP datasheet pdf ADF4360-5BCP pinout ADF4360-5BCP equivalent ADF4360-5BCP replacement ADF4360-5BCP vs ADF4360-5BCPZ Analog Devices ADF4360-5BCP ADF4360-5BCP 1300 MHz ADF4360-5BCP 24-WFQFN ADF4360-5BCP local oscillator ADF4360-5BCP price ADF4360-5BCP stock

関連部品&用語

Analog Devices ADF4360-5BCP ADF4360-5BCPZ ADF4360-3BCP ADF4360-8BCPZ integer-N synthesizer frequency synthesizer voltage-controlled oscillator VCO phase-locked loop PLL local oscillator RF clock generation frequency conversion three-wire serial interface divide-by-2 output 1300 MHz 600 MHz to 700 MHz 1.4 GHz 24-WFQFN WFQFN package family surface mount SMD RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示