ADF4360-5BCP - 1.3 GHz Integer-N Synthesizer | Analog Devices
MPN: ADF4360-5BCP ✓ Hoạt độngADF4360-5BCP Tóm tắt
An integer-N frequency synthesizer combines a phase-locked loop, frequency divider, and voltage-controlled oscillator to generate a stable RF output. The VCO supplies the high-frequency reference within the tuning system, while the synthesizer locks that signal to a stable reference. The ADF4360-5 integrates these functions to support RF clock generation, local oscillator creation, and frequency conversion within communications and signal-processing equipment.
The principal feature of the ADF4360-5 is its integrated RF VCO for the 1300 MHz-centered design range. Its divide-by-2 operating mode provides a second output range from 600 MHz to 700 MHz. This combination allows one synthesizer to support RF signals in both the 1.15 GHz to 1.4 GHz class and the lower 600 MHz to 700 MHz class, subject to the register settings and external support circuitry selected for the design.
All on-chip registers are accessed through a simple three-wire interface. This architecture reduces the number of control connections required when the synthesizer is paired with a microcontroller, embedded processor, or dedicated serial controller. The 24-WFQFN exposed-pad package provides a compact surface-mount implementation, while the exposed pad provides the thermal connection needed when operating across the device's frequency range.
Typical uses include local oscillator generation in RF communications equipment, clocking for mixers and converters, test-and-measurement signal sources, and frequency-generation stages in industrial or wireless systems. In each case, the reference frequency, loop filter, output power, and register configuration determine whether the synthesized output meets the application's phase-noise, tuning, and output-level requirements.
PCB implementation should preserve the layout and grounding practices associated with the exposed-pad package. The three-wire control signals require suitable trace routing, and the RF output path should use controlled impedance and short return paths. The power and ground connections must provide low-impedance distribution because resistance and inductance in those paths can affect oscillator behavior and phase noise.
This product record combines the manufacturer's functional description with distributor package and ordering information. It also organizes practical sourcing questions, pin-compatible alternatives, application guidance, and the design considerations that matter when integrating a high-frequency integer-N synthesizer.
Bộ thay thế dễ dàng lắp đặt cho ADF4360-5BCP — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
ADF4360-5BCPZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
ADF4360-5BCP Thông số kỹ thuật
| Device Type | Fully integrated integer-N synthesizer and VCO |
| Design Center Frequency | 1300 MHz |
| Maximum RF Output Frequency | 1.4 GHz |
| Divide-by-2 Output Range | 600 MHz to 700 MHz |
| Frequency Synthesis Architecture | Integer-N |
| Oscillator Type | Integrated voltage-controlled oscillator |
| Control Interface | 3-wire serial interface |
| Hộp | 24-WFQFN exposed-pad CSP |
| Số chân | 24 pins |
| Kiểu lắp đặt | Surface mount |
| Number of RF Outputs | 1 |
Hướng dẫn cấu hình chân ADF4360-5BCP 24-wfqfn exposed-pad csp
Cấu hình chân cho ADF4360-5BCP (24-wfqfn exposed-pad csp gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho ADF4360-5BCP.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
ADF4360-5BCP phù hợp cho 6 Áp dụngs: RF Local Oscillator Generation, RF Mixer and Converter Clocks, Wireless Transmitter Reference, RF Test and Measurement Source, Wireless Sensor Node Carrier, Industrial RF Signal Generator.
RF Local Oscillator Generation
The ADF4360-5BCP is appropriate for generating a local oscillator around the 1300 MHz design center in RF transmitters, receivers, and converters. Its integrated integer-N synthesizer and VCO consolidate the feedback oscillator and frequency-generation functions into one 24-WFQFN device, while the three-wire interface allows compact control from a microcontroller. With the device configured for a 1.4 GHz-class output, the resulting reference can drive a mixer or downstream RF stage. The primary design checks are reference stability, loop-filter selection, output power, and controlled-impedance routing at the RF output.
Được đề xuất
RF Mixer and Converter Clocks
The ADF4360-5BCP can provide the synthesized reference used by an RF mixer, downconverter, or upconverter operating near the 1300 MHz center region. Integrating the VCO with the integer-N synthesizer reduces the number of discrete frequency-generation sections needed around the converter. The divide-by-2 mode additionally covers 600 MHz to 700 MHz, which can suit lower-frequency converter arrangements. Engineering evaluation should verify the required LO frequency against the device's tuning tables and then tune the loop filter for the application's reference and phase-noise requirements.
Được đề xuất
Wireless Transmitter Reference
A wireless transmitter requiring a stable RF reference near 1300 MHz can use the ADF4360-5BCP as an integrated frequency-generation block. The 1.4 GHz maximum output covers the upper portion of the intended RF class, while the three-wire control path simplifies integration with transmitter control logic. The synthesizer architecture allows the output frequency to be established through on-chip register settings. Before deployment, engineers should confirm phase noise, spur performance, output power, and reference purity against transmitter masks because those system requirements determine acceptable loop-filter and filtering configurations.
Được đề xuất
RF Test and Measurement Source
The ADF4360-5BCP supports compact RF test sources and stimulus-generation equipment requiring a local oscillator around 1300 MHz. Integrating the integer-N synthesizer and VCO allows the instrument to generate a digitally controlled RF reference without a separate oscillator assembly. The 600 MHz to 700 MHz divide-by-2 range broadens its usefulness for test planes operating below the main RF band. Instrument designers should use the manufacturer tuning, output-power, and phase-noise tables to select register settings and then add suitable output filtering when spur levels must meet the measurement path's requirements.
Được đề xuất
Wireless Sensor Node Carrier
The ADF4360-5BCP can supply a synthesized RF reference in a wireless sensor node that also performs local mixing, frequency conversion, or coherent signal generation. Its compact 24-WFQFN exposed-pad package supports integration beside a controller or radio circuit, and the three-wire register interface provides a compact control connection. The 1300 MHz-centered output or the 600 MHz to 700 MHz divided output can serve different RF stages within the node. Power consumption, thermal behavior, output power, and startup settling should be evaluated together because battery-operated and compact equipment must balance RF performance with energy use.
Được đề xuất
Industrial RF Signal Generator
The ADF4360-5BCP is suitable for industrial RF signal-generation modules that require a programmable reference around the 1300 MHz design center. The integer-N architecture supports digital frequency control through the three-wire interface, while the integrated VCO reduces board area compared with separate synthesizer and oscillator implementations. The divided 600 MHz to 700 MHz mode can also serve auxiliary RF test or conversion functions. Industrial equipment designers should validate temperature limits, long-term frequency stability, electromagnetic compatibility, and thermal performance across the complete enclosure and operating environment before production release.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho ADF4360-5BCP — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | ADF4360-5BCPZ |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-WFQFN exposed-pad CSP | 24-WFQFN exposed-pad CSP |
| Device Type | Integer-N synthesizer with integrated VCO | Integer-N synthesizer with integrated VCO |
| Design Center Frequency | 1300 MHz | 1300 MHz |
| Maximum RF Output Frequency | 1.4 GHz | 1.4 GHz |
| Divide-by-2 Output Range | 600 MHz to 700 MHz | 600 MHz to 700 MHz |
| Control Interface | 3-wire serial interface | 3-wire serial interface |
| Number of RF Outputs | 1 | 1 |
| Ordering Suffix | BCP | BCPZ |
Bảo phân biệt quan trọng
- Matches the identified same-frequency-band ordering option (vsADF4360-5BCPZ)
- Provides integrated VCO and integer-N synthesis (vsADF4360-5BCPZ)
- Supports two useful RF output classes (vsADF4360-5BCPZ)
Ghi chú thiết kế
Use the exposed pad as a low-impedance ground and thermal connection. Follow the manufacturer package and land-pattern dimensions rather than estimating the pad geometry from the package name. Keep the exposed-pad vias close to the thermal pad and preserve an uninterrupted ground return beneath the device. This is especially important for an RF VCO because parasitic inductance and resistance in the supply return can degrade oscillator behavior and phase noise.
Route the three-wire control interface away from the RF output and VCO region where practical, and provide a stable reference connection with short return paths. The RF output should use controlled impedance and a compact connection to the following RF stage. Avoid long ground-plane interruptions beneath the VCO section. Include the loop-filter components near the relevant synthesizer nodes as directed by the reference design, because long feedback traces can increase phase-noise and spur issues.
Do not treat the 600 MHz to 700 MHz divided range as an automatic substitute for the normal 1.15 GHz to 1.4 GHz operating class. Select the divider, output path, loop settings, and surrounding filtering for the intended frequency. Also verify the ADF4360-5BCP ordering code, temperature grade, and packing configuration before releasing a production order, particularly when comparing it with the ADF4360-5BCPZ ordering option.
Thông tin tuân thủ
Confirm RoHS, REACH, lead-free, halogen-free, and conflict-mineral declarations for the exact ordering code with Analog Devices before production release.