ADS1286UB - 12-Bit 20 kHz Micropower ADC | Texas Instruments
MPN: ADS1286UB ✓ सक्रियADS1286UB अवलोकन
A sampling ADC is an analog-to-digital converter category that uses an internal sample-and-hold circuit to capture an input voltage before conversion. The ADS1286 belongs to the broader hierarchy of ADC, data converter, signal-chain IC, and power-management-aware embedded semiconductor. Differential input is particularly useful when the desired signal is smaller than supply-voltage variation or offset, because subtracting two related inputs can reject common-mode noise and reduce the influence of ground disturbances.
The principal features are 12-bit resolution, a 20 kHz sampling rate, and a typical supply current of 250 µA. The differential architecture accepts two input terminals for single-ended or differential signal conditioning, while the sampling front end converts the selected voltage into a 12-bit code. Serial interface compatibility supports connection to embedded processors, sensors, and remote measurement nodes without requiring a parallel data bus.
The ADS1286 is specifically designed for low-power acquisition rather than high-throughput conversion. Its 20 kHz maximum sampling capability supports signals up to 10 kHz under the Nyquist criterion, although the usable analog bandwidth and acquisition time must also be respected. The serial interface reduces pin count and PCB routing requirements, but conversion timing, clocking, settling behavior, reference stability, and input noise still determine practical measurement accuracy.
Typical applications include battery-powered industrial sensing, portable medical instrumentation, remote environmental monitoring, low-energy condition monitoring, and compact process-control nodes. In each case, the 250 µA supply current helps preserve battery life, while differential inputs can simplify connection to bridge sensors, resistive dividers, and current-shunt measurements. The 8-SOIC package also supports conventional surface-mount assembly.
Designers should verify the electrical limits, input range, reference requirements, and acquisition timing in the manufacturer datasheet before fixing the analog frontend. Pay particular attention to source impedance, differential input filtering, reference decoupling, and the relationship between sampling frequency and signal bandwidth. Layout should keep the analog input and reference paths short and separate digital clock activity from sensitive analog nodes.
This page combines the official TI product information with engineering-focused guidance covering low-noise acquisition, serial interfacing, power management, PCB implementation, and practical selection between documented ADS1286 family orderings. It also distinguishes verified drop-in family alternatives from options that require additional electrical review before substitution.
के लिए ड्रॉप-इन विकल्प ADS1286UB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADS1286UB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.
ADS1286UL/2K5
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADS1286U/2K5G4
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →ADS1286UA/2K5G4
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADS1286UG4
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ADS1286UB Maximum Ratings और Electrical Characteristics
| Converter Type | 12-bit sampling ADC |
| रेज़ोल्यूशन | 12 bit |
| सैंपलिंग रेट | 20 kHz |
| Input Architecture | Differential input |
| Input Count | 1 |
| Sample-and-Hold Amplifier | Integrated |
| सप्लाई करंट | 250 µA |
| Serial Interface | SPI and SSI compatible |
| Serial Interface Wiring | 2-wire or 3-wire |
| पैकेज | 8-lead SOIC |
| माउंटिंग प्रकार | Surface mount |
| ऑपरेटिंग तापमान | -40 °C to +85 °C |
| Conversion Code Guarantee | No missing codes |
ADS1286UB 8-lead soic पिन कॉन्फ़िगरेशन गाइड
ADS1286UB (8-lead soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADS1286UB.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ADS1286UB के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Industrial Sensors, Portable Medical Instrumentation, Remote Environmental Monitoring, Precision Process Measurement, Condition Monitoring Systems, Low-Power IoT Sensor Nodes.
Battery-Powered Industrial Sensors
The Texas Instruments ADS1286UB fits battery-powered industrial sensing nodes because it combines a 12-bit conversion resolution with a 20 kHz sampling rate and only 250 µA of supply current. A bridge sensor, resistive divider, or current shunt can feed the differential input, allowing the ADC to resolve a small signal superimposed on a larger common-mode voltage. The serial interface supports a compact two-wire or three-wire connection to a microcontroller, while the 8-SOIC package simplifies conventional surface-mount assembly. In a field-installed node, keep the ADC close to the sensor, use symmetric input routing, and decouple the supply and reference locally to preserve measurement stability.
अनुशंसित
Portable Medical Instrumentation
The ADS1286UB is appropriate for portable medical measurement systems that require compact conversion, differential input, and low supply current. Its 12-bit resolution and 20 kHz sampling capability can support acquisition from pressure, temperature, or biopotential conditioning stages, although each signal requires suitable clinical signal conditioning and safety review. The 250 µA ADC supply current helps limit consumption in battery-operated equipment, and the SPI- or SSI-compatible interface avoids a wide parallel bus. Differential analog routing and a low-noise reference are particularly important when the wanted bioelectric signal is much smaller than the analog-system offset and ground disturbance.
अनुशंसित
Remote Environmental Monitoring
The ADS1286UB supports remote environmental-monitoring nodes that combine a low-power MCU with resistive or bridge-based temperature, humidity, pressure, or gas sensors. Its 250 µA supply current and 20 kHz sampling rate provide a practical balance between periodic measurement and low-duty-cycle energy use. The differential input accepts complementary sensor outputs, while SPI or SSI communication reduces the number of signals routed over a potentially long external connection. Place filtering close to the ADC pins, protect exposed sensor lines from switching noise, and use the manufacturer timing data to select an acquisition rate appropriate for slowly varying environmental signals.
अनुशंसित
Precision Process Measurement
The ADS1286UB can be used in compact process-measurement modules that acquire slow differential signals from pressure transmitters, strain bridges, or resistive transducers. Its 12-bit output provides 4096 discrete code levels, and the 20 kHz sampling capability is more than sufficient for many process variables when paired with suitable analog filtering. The ADC's low 250 µA supply current is valuable when each sensor node operates from limited power. The main design tradeoff is that switching converters and digital clocks can corrupt small sensor signals, so separate analog and digital return paths, local reference bypassing, and controlled source impedances should be treated as mandatory layout practices.
अनुशंसित
Condition Monitoring Systems
The ADS1286UB fits low-power vibration, temperature, or electrical-condition monitoring modules that periodically sample a sensor analog channel. The 20 kHz maximum sampling rate supports higher-bandwidth condition signals than a conventional slow meter, while 12-bit resolution provides a practical balance between data size, conversion performance, and communication traffic. Differential input helps when the transducer produces complementary outputs or when the measurement is referenced to a sensor return. Sampling frequency, analog bandwidth, anti-alias filtering, and digital decimation should be selected together; do not treat the converter’s sampling rate as proof that every higher-frequency mechanical signal can be measured accurately.
अनुशंसित
Low-Power IoT Sensor Nodes
The ADS1286UB is well matched to low-power IoT sensor nodes because it combines a 20 kHz sampling ADC, 12-bit conversion, 250 µA supply current, and a compact serial interface. The ADC can remain associated with a duty-cycled sensor frontend rather than drawing power continuously, allowing the host microcontroller to control acquisition and communication timing. Differential inputs reduce sensitivity to shared ground movement when the sensor uses a bridge or paired divider. Use short analog traces, an appropriate anti-alias filter, and stable reference layout; also confirm the exact supply operating region and acquisition timing in the manufacturer datasheet before finalizing the node architecture.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ADS1286UB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ADS1286UL/2K5 | ADS1286U/2K5 | ADS1286UA/2K5G4 | ADS1286UG4 |
|---|---|---|---|---|---|
| Package | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 20 kHz | 20 kHz | 20 kHz | 20 kHz | 20 kHz |
| Supply Current | 250 µA | 250 µA | 250 µA | 250 µA | 250 µA |
| Input Architecture | Differential input | Differential input | Differential input | Differential input | Differential input |
| Serial Interface | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire |
| Sample-and-Hold Amplifier | Integrated | Integrated | Integrated | Integrated | Integrated |
| Ordering Code | ADS1286UB | ADS1286UL/2K5 | ADS1286U/2K5 | ADS1286UA/2K5G4 | ADS1286UG4 |
मुख्य विशेषताएँ
- Combines 12-bit resolution with a 20 kHz sampling rate in a micropower converter (बनामADS1286UL/2K5)
- Low 250 µA supply current supports duty-cycled and battery-powered acquisition (बनामADS1286U/2K5)
- Differential input and integrated sample-and-hold amplifier simplify low-level sensor acquisition (बनामADS1286UA/2K5G4)
- SPI- and SSI-compatible interface supports flexible serial host connections (बनामADS1286UG4)
डिज़ाइन नोट्स
Route the two differential inputs as a compact, symmetric pair and keep them away from serial clock, data, and switching-supply nodes. Place analog filtering and the ADS1286UB close to the sensor so that interference is attenuated before reaching the sampling input. Ground the analog return independently through a controlled path and use the manufacturer pin and layout guidance for the reference and bypass connections.
Select the sampling rate, analog bandwidth, and anti-alias filter as one signal chain rather than choosing them independently. The 20 kHz conversion rate does not by itself guarantee accurate measurement of a 10 kHz input because acquisition time, settling, clocking, and filter behavior also affect the result. Use the manufacturer acquisition and timing characteristics to determine the maximum valid source impedance and the required settling period.
Estimated power consumption is 0.25 mW when the ADC operates from a 1 V supply, using the stated 250 µA supply current; the actual rail voltage and active-duty-cycle fraction must be included in the final energy budget. Bypass the supply and reference at the device with the capacitance and placement specified by the manufacturer datasheet, and account for reference-current demand separately from the ADC conversion current.
Do not treat a matching 8-lead SOIC footprint as sufficient proof of interchangeability. Verify the complete ordering code, temperature grade, packing method, reference implementation, interface timing, input limits, and acquisition behavior. This is particularly important when using a family ordering as a substitute for ADS1286UB because the component suffix can encode commercial and assembly differences even when the electrical function and PCB footprint remain compatible.
अनुपालन जानकारी
The ADS1286 is a general-purpose analog-to-digital converter; automotive qualification was not established. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the product's material declarations.