ADS1286UB - 12-Bit 20 kHz Micropower ADC | Texas Instruments
MPN: ADS1286UB ✓ 啟用中ADS1286UB 概覽
A sampling ADC is an analog-to-digital converter category that uses an internal sample-and-hold circuit to capture an input voltage before conversion. The ADS1286 belongs to the broader hierarchy of ADC, data converter, signal-chain IC, and power-management-aware embedded semiconductor. Differential input is particularly useful when the desired signal is smaller than supply-voltage variation or offset, because subtracting two related inputs can reject common-mode noise and reduce the influence of ground disturbances.
The principal features are 12-bit resolution, a 20 kHz sampling rate, and a typical supply current of 250 µA. The differential architecture accepts two input terminals for single-ended or differential signal conditioning, while the sampling front end converts the selected voltage into a 12-bit code. Serial interface compatibility supports connection to embedded processors, sensors, and remote measurement nodes without requiring a parallel data bus.
The ADS1286 is specifically designed for low-power acquisition rather than high-throughput conversion. Its 20 kHz maximum sampling capability supports signals up to 10 kHz under the Nyquist criterion, although the usable analog bandwidth and acquisition time must also be respected. The serial interface reduces pin count and PCB routing requirements, but conversion timing, clocking, settling behavior, reference stability, and input noise still determine practical measurement accuracy.
Typical applications include battery-powered industrial sensing, portable medical instrumentation, remote environmental monitoring, low-energy condition monitoring, and compact process-control nodes. In each case, the 250 µA supply current helps preserve battery life, while differential inputs can simplify connection to bridge sensors, resistive dividers, and current-shunt measurements. The 8-SOIC package also supports conventional surface-mount assembly.
Designers should verify the electrical limits, input range, reference requirements, and acquisition timing in the manufacturer datasheet before fixing the analog frontend. Pay particular attention to source impedance, differential input filtering, reference decoupling, and the relationship between sampling frequency and signal bandwidth. Layout should keep the analog input and reference paths short and separate digital clock activity from sensitive analog nodes.
This page combines the official TI product information with engineering-focused guidance covering low-noise acquisition, serial interfacing, power management, PCB implementation, and practical selection between documented ADS1286 family orderings. It also distinguishes verified drop-in family alternatives from options that require additional electrical review before substitution.
直接替換替代品,適用於 ADS1286UB — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ADS1286UB (相同外形與佔位) — 差異在於 Package.
ADS1286UL/2K5
✅ 直接替換📋 參考替代品(不在目錄中)
ADS1286U/2K5G4
✅ 直接替換聯絡詢價
查看資料表 →ADS1286UA/2K5G4
✅ 直接替換📋 參考替代品(不在目錄中)
ADS1286UG4
✅ 直接替換📋 參考替代品(不在目錄中)
ADS1286UB 最大額定值與電氣特性
| Converter Type | 12-bit sampling ADC |
| 解析度 | 12 bit |
| 取樣率 | 20 kHz |
| Input Architecture | Differential input |
| Input Count | 1 |
| Sample-and-Hold Amplifier | Integrated |
| 供應電流 | 250 µA |
| Serial Interface | SPI and SSI compatible |
| Serial Interface Wiring | 2-wire or 3-wire |
| 封裝 | 8-lead SOIC |
| 安裝類型 | Surface mount |
| 工作溫度 | -40 °C to +85 °C |
| Conversion Code Guarantee | No missing codes |
ADS1286UB 8-lead soic 腳位配置指南
ADS1286UB(8-lead soic 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: ADS1286UB.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADS1286UB 適用於 6 應用s: Battery-Powered Industrial Sensors, Portable Medical Instrumentation, Remote Environmental Monitoring, Precision Process Measurement, Condition Monitoring Systems, Low-Power IoT Sensor Nodes.
Battery-Powered Industrial Sensors
The Texas Instruments ADS1286UB fits battery-powered industrial sensing nodes because it combines a 12-bit conversion resolution with a 20 kHz sampling rate and only 250 µA of supply current. A bridge sensor, resistive divider, or current shunt can feed the differential input, allowing the ADC to resolve a small signal superimposed on a larger common-mode voltage. The serial interface supports a compact two-wire or three-wire connection to a microcontroller, while the 8-SOIC package simplifies conventional surface-mount assembly. In a field-installed node, keep the ADC close to the sensor, use symmetric input routing, and decouple the supply and reference locally to preserve measurement stability.
推薦
Portable Medical Instrumentation
The ADS1286UB is appropriate for portable medical measurement systems that require compact conversion, differential input, and low supply current. Its 12-bit resolution and 20 kHz sampling capability can support acquisition from pressure, temperature, or biopotential conditioning stages, although each signal requires suitable clinical signal conditioning and safety review. The 250 µA ADC supply current helps limit consumption in battery-operated equipment, and the SPI- or SSI-compatible interface avoids a wide parallel bus. Differential analog routing and a low-noise reference are particularly important when the wanted bioelectric signal is much smaller than the analog-system offset and ground disturbance.
推薦
Remote Environmental Monitoring
The ADS1286UB supports remote environmental-monitoring nodes that combine a low-power MCU with resistive or bridge-based temperature, humidity, pressure, or gas sensors. Its 250 µA supply current and 20 kHz sampling rate provide a practical balance between periodic measurement and low-duty-cycle energy use. The differential input accepts complementary sensor outputs, while SPI or SSI communication reduces the number of signals routed over a potentially long external connection. Place filtering close to the ADC pins, protect exposed sensor lines from switching noise, and use the manufacturer timing data to select an acquisition rate appropriate for slowly varying environmental signals.
推薦
Precision Process Measurement
The ADS1286UB can be used in compact process-measurement modules that acquire slow differential signals from pressure transmitters, strain bridges, or resistive transducers. Its 12-bit output provides 4096 discrete code levels, and the 20 kHz sampling capability is more than sufficient for many process variables when paired with suitable analog filtering. The ADC's low 250 µA supply current is valuable when each sensor node operates from limited power. The main design tradeoff is that switching converters and digital clocks can corrupt small sensor signals, so separate analog and digital return paths, local reference bypassing, and controlled source impedances should be treated as mandatory layout practices.
推薦
Condition Monitoring Systems
The ADS1286UB fits low-power vibration, temperature, or electrical-condition monitoring modules that periodically sample a sensor analog channel. The 20 kHz maximum sampling rate supports higher-bandwidth condition signals than a conventional slow meter, while 12-bit resolution provides a practical balance between data size, conversion performance, and communication traffic. Differential input helps when the transducer produces complementary outputs or when the measurement is referenced to a sensor return. Sampling frequency, analog bandwidth, anti-alias filtering, and digital decimation should be selected together; do not treat the converter’s sampling rate as proof that every higher-frequency mechanical signal can be measured accurately.
推薦
Low-Power IoT Sensor Nodes
The ADS1286UB is well matched to low-power IoT sensor nodes because it combines a 20 kHz sampling ADC, 12-bit conversion, 250 µA supply current, and a compact serial interface. The ADC can remain associated with a duty-cycled sensor frontend rather than drawing power continuously, allowing the host microcontroller to control acquisition and communication timing. Differential inputs reduce sensitivity to shared ground movement when the sensor uses a bridge or paired divider. Use short analog traces, an appropriate anti-alias filter, and stable reference layout; also confirm the exact supply operating region and acquisition timing in the manufacturer datasheet before finalizing the node architecture.
推薦
推薦產品摘要
工程參考資料,適用於 ADS1286UB — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ADS1286UL/2K5 | ADS1286U/2K5 | ADS1286UA/2K5G4 | ADS1286UG4 |
|---|---|---|---|---|---|
| Package | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC | 8-lead SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Resolution | 12 bit | 12 bit | 12 bit | 12 bit | 12 bit |
| Sampling Rate | 20 kHz | 20 kHz | 20 kHz | 20 kHz | 20 kHz |
| Supply Current | 250 µA | 250 µA | 250 µA | 250 µA | 250 µA |
| Input Architecture | Differential input | Differential input | Differential input | Differential input | Differential input |
| Serial Interface | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire | SPI and SSI compatible, 2-wire or 3-wire |
| Sample-and-Hold Amplifier | Integrated | Integrated | Integrated | Integrated | Integrated |
| Ordering Code | ADS1286UB | ADS1286UL/2K5 | ADS1286U/2K5 | ADS1286UA/2K5G4 | ADS1286UG4 |
主要差異化特點
- Combines 12-bit resolution with a 20 kHz sampling rate in a micropower converter (對比ADS1286UL/2K5)
- Low 250 µA supply current supports duty-cycled and battery-powered acquisition (對比ADS1286U/2K5)
- Differential input and integrated sample-and-hold amplifier simplify low-level sensor acquisition (對比ADS1286UA/2K5G4)
- SPI- and SSI-compatible interface supports flexible serial host connections (對比ADS1286UG4)
設計說明
Route the two differential inputs as a compact, symmetric pair and keep them away from serial clock, data, and switching-supply nodes. Place analog filtering and the ADS1286UB close to the sensor so that interference is attenuated before reaching the sampling input. Ground the analog return independently through a controlled path and use the manufacturer pin and layout guidance for the reference and bypass connections.
Select the sampling rate, analog bandwidth, and anti-alias filter as one signal chain rather than choosing them independently. The 20 kHz conversion rate does not by itself guarantee accurate measurement of a 10 kHz input because acquisition time, settling, clocking, and filter behavior also affect the result. Use the manufacturer acquisition and timing characteristics to determine the maximum valid source impedance and the required settling period.
Estimated power consumption is 0.25 mW when the ADC operates from a 1 V supply, using the stated 250 µA supply current; the actual rail voltage and active-duty-cycle fraction must be included in the final energy budget. Bypass the supply and reference at the device with the capacitance and placement specified by the manufacturer datasheet, and account for reference-current demand separately from the ADC conversion current.
Do not treat a matching 8-lead SOIC footprint as sufficient proof of interchangeability. Verify the complete ordering code, temperature grade, packing method, reference implementation, interface timing, input limits, and acquisition behavior. This is particularly important when using a family ordering as a substitute for ADS1286UB because the component suffix can encode commercial and assembly differences even when the electrical function and PCB footprint remain compatible.
合規資訊
The ADS1286 is a general-purpose analog-to-digital converter; automotive qualification was not established. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or the product's material declarations.