Texas Instruments

ADS7810U-1 - 12-Bit 800 kHz SAR ADC | Texas Instruments

MPN: ADS7810U-1 ✓ सक्रिय
±5 V Vdss 28-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

ADS7810U-1 अवलोकन

Texas Instruments ADS7810U-1 is a 12-bit, single-channel successive-approximation register analog-to-digital converter with an 800 kS/s sampling rate, single-ended analog input, and a parallel data interface in a 28-pin SOIC package. The device operates from a 5 V digital supply and a ±5 V analog supply, making it suitable for bipolar analog measurement systems that require direct microprocessor interfacing.

An analog-to-digital converter is an interface IC that converts a continuously varying analog voltage into a numerical representation for processing, measurement, or control. The ADS7810U-1 belongs to the SAR ADC hierarchy, where an internal sample-and-hold circuit and successive-approximation conversion process one analog sample at a time. This architecture is appropriate for industrial instrumentation, data acquisition, and embedded control systems where a parallel interface provides straightforward connection to digital processors.

The principal specifications are 12-bit resolution, an 800 kS/s maximum sampling rate, one single-ended input, and a 28-pin SOIC package. The converter uses a 5 V digital supply and a ±5 V analog supply. Its specified operating temperature range is -40 °C to +70 °C. The parallel output supports direct access to conversion results without requiring a serial data link.

Internally, the ADS7810 is described as a complete CMOS sampling converter containing a 12-bit capacitor-based SAR ADC, inherent sample-and-hold circuitry, a reference, a clock, and a microprocessor interface. The capacitor-based conversion core repeatedly resolves the input against internal charge redistribution. The parallel interface then presents the completed 12-bit result for acquisition by an external processor or latch.

Typical applications include industrial process measurement, laboratory instrumentation, digital panel meters, closed-loop control, data-acquisition equipment, and embedded systems that sample bipolar analog signals. Its 800 kS/s conversion capability provides a practical balance between acquisition speed, interface simplicity, and analog measurement resolution.

PCB design should preserve short, controlled analog-input traces and provide stable supply bypassing near the device. Because the converter uses parallel outputs, data-bus timing and output settling should be checked against the acquisition system’s clock requirements. The 28-pin SOIC footprint also requires enough spacing around the device for routing all address, control, data, analog, and supply connections.

This page combines the core ADS7810U-1 specifications with application guidance, design notes, comparison data, and verified drop-in alternatives. It is intended to help engineers identify the correct ADC replacement while accounting for package compatibility, resolution, conversion rate, interface type, and supply requirements.

के लिए ड्रॉप-इन विकल्प ADS7810U-1 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADS7810U-1 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Architecture, Sampling Rate, Resolution, Analog Supply Voltage.

Texas Instruments
Package: 28-SOIC (7.50 mm body width)
Architecture: SAR (Successive Approximation Register)
Sampling Rate: 800 kHz
Texas Instruments
Package: 28-pin SOIC (DW) - wide body
Architecture: SAR with inherent S/H
Sampling Rate: 800 kHz (max)
इसके साथ तुलना करें ADS7810U-1 →
Texas Instruments
Architecture: Successive-approximation register (SAR)
Sampling Rate: 800 kSPS
इसके साथ तुलना करें ADS7810U-1 →

ADS7810U/1KG4

✅ ड्रॉप-इन
Texas Instruments
📦 28-pin SOIC
12 bits · SAR (Successive Approximation Register) · 1 single-ended · 800 kHz · 1.25 us · +/-10 V (true bipolar) · +/-5 V · 5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS7810U/1KE4

✅ ड्रॉप-इन
📦 28-pin SOIC
Same 12-bit, 800 kS/s SAR ratings and 28-pin SOIC package; stated core functional differences are 0%, while the ordering suffix differs

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7810UB/1KE4

✅ ड्रॉप-इन
📦 28-pin SOIC
The cross-reference states consistent main performance characteristics, terminals, and package; the stated ratings differ by 0%

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ADS7810UB

✅ ड्रॉप-इन
Texas Instruments
📦 28-pin SOIC
12 bits · 800 kHz (max) · 1.25 µs · ±10 V (standard) · 69 dB (min) at 250 kHz input · ±3/4 LSB · ±1 LSB · SAR with inherent S/H

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS7819UB

✅ ड्रॉप-इन
Texas Instruments
📦 28-pin SOIC
12 bit · 800 kSPS · 1 channel · Successive-approximation register (SAR) · 12-bit parallel output · 28-pin SOIC · 28 terminals · Rectangular

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS7810U-1 Maximum Ratings और Electrical Characteristics

रेज़ोल्यूशन 12 bit
Maximum Sampling Rate 800 kS/s
Number of Input Channels 1 channel
Conversion Architecture Successive-approximation register (SAR)
Analog Input Type Single-ended
Data Interface Parallel
Analog Supply Voltage ±5 V
Digital Supply Voltage 5 V
ऑपरेटिंग तापमान रेंज -40 °C to +70 °C
पैकेज 28-pin SOIC
Total Pin Count 28 pins
माउंटिंग प्रकार Surface mount
Process Technology CMOS
Temperature Grade Industrial
Internal Sample-and-Hold Yes
Internal Reference Yes

ADS7810U-1 28-pin soic पिन कॉन्फ़िगरेशन गाइड

ADS7810U-1 (28-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

ADS7810U-1 के लिए 28-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADS7810U-1.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADS7810U-1 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Process Measurement, Laboratory Data Acquisition, Digital Panel Meter, Closed-Loop Control System, Power Supply Monitoring, Embedded Sensor Interface.

🏭

Industrial Process Measurement

The ADS7810U-1 fits industrial process measurement when a sensor or transducer produces a conditioned, single-ended analog signal that must be sampled by an embedded controller. Its 12-bit resolution provides 4096 digital codes, while the 800 kS/s maximum sampling rate supports rapid acquisition of changing process values. The parallel interface exposes conversion results directly to a processor or acquisition latch. Use the ±5 V analog supply for compatible bipolar front-end circuitry and isolate the 5 V digital side according to the manufacturer’s grounding guidance. Conversion timing, input settling, and simultaneous sampling requirements should be checked before choosing this ADC for a particular loop.

🔧

Laboratory Data Acquisition

The ADS7810U-1 is appropriate for laboratory data-acquisition equipment that must capture a conditioned analog waveform or sensor output at up to 800 kS/s. Its 12-bit SAR architecture provides a practical resolution-versus-speed balance, while the parallel output interface simplifies connection to digital acquisition logic. The ±5 V analog supply supports bipolar measurement front ends, and the 5 V digital supply aligns with conventional laboratory-control logic. For high-accuracy measurements, evaluate reference quality, input bandwidth, settling time, noise performance, and the acquisition system’s clock relationship using the manufacturer datasheet.

📺

Digital Panel Meter

The ADS7810U-1 can serve as the acquisition element in a digital panel meter measuring pressure, temperature, position, or another slowly changing analog quantity. The 12-bit conversion resolution offers a useful display range, and the 800 kS/s capability permits repeated measurements or filtering without requiring a high-speed serial ADC. Its 28-pin SOIC package is practical for a mixed analog and digital measurement board. Keep the sensor signal path short, reference the converter according to the datasheet, and select averaging or digital filtering to balance display stability against response time.

🤖

Closed-Loop Control System

The ADS7810U-1 is suitable for closed-loop control applications that require frequent feedback measurements from an analog command or sensor signal. A maximum conversion rate of 800 kS/s allows the control processor to obtain new 12-bit measurements rapidly, while the parallel interface supports deterministic data capture. The converter must operate within its input, reference, and supply limits, and the analog signal must settle properly before each conversion. Validate loop latency, processor bus timing, scaling, and saturation behavior in the target controller before relying on the nominal sampling rate for control-loop timing.

⚡

Power Supply Monitoring

The ADS7810U-1 can monitor a scaled power-supply voltage in laboratory, industrial, or service equipment when the measured level is conditioned into the converter’s permitted analog range. Its 12-bit resolution can distinguish 4096 levels over the full conversion range, making it useful for supervision functions that need more detail than a simple comparator. The 800 kS/s conversion capability supports trend acquisition and fault analysis. Designers should account for divider accuracy, input impedance, reference stability, isolation, and the requirement that the monitored signal remain within the ADC input limits.

🧩

Embedded Sensor Interface

The ADS7810U-1 can serve as the analog front end for an embedded sensor node that converts a conditioned sensor voltage into a 12-bit digital measurement. Its single-ended input and parallel interface are straightforward for a processor with dedicated or multiplexed digital I/O, while the 800 kS/s rate provides headroom for periodic sampling and calibration routines. Use suitable analog conditioning for sensor excitation, filtering, gain, and level shifting. Because the converter is designed for a ±5 V analog supply and 5 V digital supply, verify compatibility with the sensor subsystem and processor voltage levels.

अनुशंसित उत्पादों का सारांश

ADS7810U/1K Related family configuration उपयोग में: Industrial Process Measurement, Digital Panel Meter, Power Supply Monitoring ADS7810U/1KE4 Related family configuration उपयोग में: Industrial Process Measurement, Digital Panel Meter, Power Supply Monitoring ADS7810UB Texas Instruments उपयोग में: Laboratory Data Acquisition, Embedded Sensor Interface ADS7819UB Texas Instruments उपयोग में: Laboratory Data Acquisition, Closed-Loop Control System ADS7810UB/1KE4 Pin-compatible family option उपयोग में: Closed-Loop Control System, Embedded Sensor Interface
What are the key specifications of ADS7810U-1 that engineers should know?
The ADS7810U-1 is a 12-bit, single-channel SAR ADC with a maximum sampling rate of 800 kS/s, a single-ended input, and a parallel data interface. According to the Texas Instruments datasheet, the device uses a 5 V digital supply and a ±5 V analog supply, operates from -40 °C to +70 °C, and is packaged in a 28-pin SOIC. These characteristics make it appropriate for bipolar industrial measurement, laboratory instrumentation, and embedded data-acquisition systems.
Where can I download the ADS7810U-1 datasheet PDF?
The ADS7810U-1 datasheet is available through the Texas Instruments product documentation for the ADS7810 family. The manufacturer datasheet describes the 12-bit capacitor-based SAR converter, inherent sample-and-hold circuit, reference, clock, parallel interface, supply requirements, and operating limits. Use the pin-description table and electrical-characteristics sections when assigning PCB signals and designing acquisition timing around the 800 kS/s conversion rate.
Where can I find the ADS7810U-1 pinout?
The ADS7810U-1 pinout is documented in the pin-configuration section of the Texas Instruments ADS7810U datasheet. The device uses a 28-pin SOIC package, so assign signals from the manufacturer diagram rather than relying on a generic SOIC drawing. Verify analog-input, reference, supply, ground, control, address, and parallel-output positions against the specific package drawing before laying out the PCB.
What is the conversion rate and resolution of the ADS7810U-1?
The ADS7810U-1 converts at up to 800 kS/s with 12-bit resolution. According to the Texas Instruments datasheet, the converter uses a successive-approximation architecture and capacitor-based conversion core. It also contains an inherent sample-and-hold function, reference, clock, and parallel processor interface, making the 800 kS/s rate suitable for fast control loops, process monitoring, and general-purpose data acquisition.
What supply voltages does the ADS7810U-1 require?
The ADS7810U-1 requires a 5 V digital supply and a ±5 V analog supply. According to the Texas Instruments datasheet, this split-supply arrangement supports bipolar analog signal acquisition while keeping the digital interface at a conventional 5 V logic level. Decouple the analog and digital supply pins independently and follow the datasheet’s grounding and layout recommendations to reduce conversion noise.
Is the ADS7810U-1 suitable for industrial process measurement?
Yes, the ADS7810U-1 is suitable for industrial process measurement because it combines a 12-bit conversion resolution, an 800 kS/s sampling rate, and a -40 °C to +70 °C operating range. Its single-ended input and parallel interface simplify acquisition when the sensing front end can present a conditioned signal within the device’s analog input and reference limits.
ADS7810U-1 vs ADS7819UB - which is better for a parallel data-acquisition system?
The ADS7819UB is presented as a direct replacement for the ADS7810U because its terminals and package are consistent, and the principal performance characteristics are described as consistent. Both devices are associated with 12-bit, 28-pin SOIC implementations, but the ADS7819UB comparison identifies it as a separate MPN. Confirm the detailed input-range, timing, and acquisition-mode requirements in each manufacturer datasheet before approving a substitution.
What is the difference between ADS7810U-1 and ADS7810U/1K?
The ADS7810U/1K retains the ADS7810 family’s 12-bit, 800 kS/s SAR conversion characteristics and 28-pin SOIC package, while the orderable suffix identifies a different catalogued configuration of the family. For a physical replacement, verify the exact temperature grade, reel or tape presentation, and manufacturer ordering code against the approved BOM. The core electrical and pin-compatibility claims should also be checked in the manufacturer documentation.
When should I choose ADS7810U-1 over ADS7819UB?
Choose the ADS7810U-1 when the design is tied to the ADS7810U device nomenclature and has an approved 12-bit, 800 kS/s, single-ended parallel-interface implementation. Consider ADS7819UB when it appears in an approved cross-reference and its detailed acquisition behavior meets the application requirements. The decisive checks are exact pin function, input and reference range, conversion timing, output coding, and temperature grade.
When is ADS7810U-1 preferable to an ADS7810UB-family alternative?
ADS7810U-1 is preferable when the original equipment specification identifies that exact manufacturer MPN or where procurement records require an exact-match configuration. An ADS7810UB-family device can be considered when its ordering suffix, temperature grade, and packaging are confirmed and the board revision already treats it as acceptable. Exact identity is preferable to relying only on similar resolution and conversion-rate descriptions.
What can replace the ADS7810U-1 on an existing PCB?
The ADS7819UB is the strongest listed drop-in candidate because the comparison describes consistent terminals, package, and principal performance characteristics. ADS7810U-family catalog variants may also fit mechanically, but each suffix must be checked for temperature grade and orderable packaging. No board change should be assumed until analog, reference, control, clock, and all parallel-output pins are compared function by function.
Is the ADS7810U-1 the same as ADS7810U/1K?
The ADS7810U-1 and ADS7810U/1K are closely related ADS7810 family catalog entries, but they are not necessarily identical orderable codes. Both are associated with a 12-bit, 800 kS/s converter in a 28-pin SOIC package. Before treating them as interchangeable, verify the exact pinout, temperature range, packing form, tape orientation, and production qualification for the particular board revision.
What is the best cross-brand equivalent for ADS7810U-1?
No cross-brand equivalent can be confirmed from the available cross-reference information for the ADS7810U-1. The available results identify manufacturer search tools and ADS7810-family or TI cross-references, but they do not name a competitor MPN with verified pin compatibility and matching electrical specifications. Use the manufacturer cross-reference search and compare the complete pinout and acquisition timing before considering a competitor device.
Where can I buy ADS7810U-1 online?
Use the Request a Quote form on this page to request ADS7810U-1 availability, lot conditions, and an order quotation. The form is the appropriate route for confirming current stock, minimum order quantity, lead time, and the exact manufacturer suffix required by your bill of materials. Include the target package and packing details in the request to avoid receiving a mechanically similar but catalogually different ADS7810 variant.
What is the price and current lead time for ADS7810U-1?
Current price and lead time for ADS7810U-1 should be requested through the Request a Quote form on this page. A quotation should identify the exact MPN, quantity, package form, and delivery requirements so that the supply response reflects the correct configuration rather than a related ADS7810U variant. Use the same form to obtain current stock confirmation and production scheduling information.
Is ADS7810U-1 in stock?
Current ADS7810U-1 stock status should be confirmed through the Request a Quote form on this page. Include the required quantity, date-code preference, packaging, and acceptable lead time in the request. A stock response for the exact ADS7810U-1 ordering code is more useful than availability inferred from a related ADS7810U, ADS7810U/1K, or ADS7810U/1KE4 catalog entry.

के लिए इंजीनियरिंग संदर्भ डेटा ADS7810U-1 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose ADS7810U-1 when maintaining an existing design requires the exact Texas Instruments ordering code and the board already uses its 12-bit, 800 kS/s, single-ended, parallel-interface architecture. ADS7810U/1K or ADS7810U/1KE4 can be considered when their temperature grade, packaging, and suffix are approved for the target production configuration. ADS7810UB/1KE4 and ADS7810UB are useful family candidates when the complete pinout and acquisition behavior match; the listed comparison reports consistent terminals, package, and principal performance characteristics. ADS7819UB is the alternative to evaluate first when a different family number is acceptable, but its identity and operating details should still be checked against the original design. For every candidate, verify analog input range, reference behavior, supply sequencing, output coding, acquisition timing, and temperature grade before approving a drop-in replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADS7810U/1K ADS7810U/1KE4 ADS7810UB/1KE4 ADS7810UB ADS7819UB
Package 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC 28-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Resolution 12 bit 12 bit 12 bit 12 bit 12 bit 12 bit
Maximum Sampling Rate 800 kS/s 800 kS/s 800 kS/s 800 kS/s 800 kS/s 800 kS/s
Conversion Architecture SAR SAR SAR SAR SAR SAR
Input Configuration Single-ended Single-ended Single-ended Single-ended Single-ended Single-ended
Data Interface Parallel Parallel Parallel Parallel Parallel Parallel
Operating Temperature Range -40 °C to +70 °C -40 °C to +70 °C -40 °C to +70 °C -40 °C to +70 °C -40 °C to +70 °C -40 °C to +70 °C
Special Features Internal reference and inherent sample-and-hold Internal reference and inherent sample-and-hold Internal reference and inherent sample-and-hold Consistent ADS7810-family functionality Consistent ADS7810-family functionality Principal performance characteristics stated as consistent

मुख्य विशेषताएँ

  • Exact original-family identity for controlled replacements (बनामADS7819UB)
  • 800 kS/s conversion rate matches the listed ADS7810-family alternatives (बनामADS7810U/1KE4)
  • Pin-compatible family alternatives preserve the 28-pin SOIC footprint (बनामADS7810UB/1KE4)

डिज़ाइन नोट्स

Route the analog input directly to the converter and keep it away from parallel data lines, clock signals, and switching supply nodes. Place the manufacturer-specified input and reference bypass capacitors close to their associated pins. The ADS7810U-1 combines a ±5 V analog supply with a 5 V digital supply, so separating analog and digital current paths is essential for preventing digital switching activity from appearing as conversion noise.

Treat each parallel output as a synchronous signal and verify setup and hold timing at the receiving logic. The 28-pin package exposes multiple address, control, and data lines, so mismatched trace lengths or poorly terminated clock routes can reduce timing margin. Use the manufacturer’s acquisition timing diagram as the basis for processor read timing, and avoid introducing unnecessary loads on the output bus.

Provide independent, low-impedance paths for the ±5 V analog supply and 5 V digital supply. Check return-current paths so output-current activity in the digital section does not share sensitive analog-ground segments. If the analog source has a large DC offset, confirm that it remains inside the converter’s allowed input range relative to the reference and supply arrangement before layout release.

Do not select a related ADS7810 suffix solely because it has the same resolution, sampling rate, and 28-pin SOIC outline. Verify the exact pin names, input and reference behavior, acquisition timing, temperature grade, and manufacturer ordering code for the assembled board. Also confirm the production packing form and reel orientation before authorizing a substitute for ADS7810U-1.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The ADS7810U-1 is an industrial-temperature analog-to-digital converter. No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was established for the exact ordering code, and automotive qualification is not indicated.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADS7810U-1 datasheet ADS7810U-1 pinout ADS7810U-1 datasheet pdf ADS7810U-1 equivalent ADS7810U-1 replacement ADS7810U-1 cross reference ADS7810U-1 vs ADS7819UB ADS7810U-1 footprint ADS7810U-1 application circuit ADS7810U-1 price ADS7810U-1 stock Texas Instruments ADS7810U-1 ADS7810 12 bit 800 kS/s ADC ADS7810U-1 parallel ADC

संबंधित कंपोनेंट्स और शब्द

Texas Instruments ADS7810U-1 ADS7810U/1K ADS7810U/1KE4 ADS7810UB/1KE4 ADS7810UB ADS7819UB analog-to-digital converter ADC successive-approximation register SAR single-ended input parallel data interface 12-bit resolution 800 kS/s sampling rate CMOS sample-and-hold circuit internal reference 28-pin SOIC SOIC package family surface-mount package industrial process measurement data acquisition closed-loop control bipolar analog signal
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें