Texas Instruments

ADS7871IDB - 14-Bit 48kSPS DAS with MUX and PGA | Texas Instruments

MPN: ADS7871IDB ✓ सक्रिय
28-pin SSOP (DB) Package
न्यूनतम ऑर्डर मात्रा: 1 |

ADS7871IDB अवलोकन

Texas Instruments ADS7871IDB is a 14-bit, 48 kSPS data acquisition system integrating a 4-channel differential or 8-channel single-ended multiplexer, programmable-gain amplifier, successive-approximation ADC, and precision internal voltage reference in a 28-pin SSOP package. It combines multichannel analog conditioning and conversion in one low-power device, reducing the number of separate ICs required for compact measurement systems.

A data acquisition system, or DAS, is an integrated analog-to-digital measurement component that acquires multiple sensor inputs, applies gain and conversion, and makes the resulting measurements available through a digital interface. The ADS7871 belongs to the ADC → data converter → data acquisition system → semiconductor hierarchy. Its integrated multiplexer allows one converter to service several sensors, while its programmable-gain amplifier adapts the input level to the ADC range before conversion.

The principal features include 14-bit resolution, a maximum conversion rate of 48 kSPS, four differential or eight single-ended input paths, and an integrated precision reference. According to the Texas Instruments product description, these functions are combined in a single low-power chip. The SSOP-28 package also supports a compact PCB footprint, while the serial interface provides a practical path to embedded processors and control systems.

Internally, the multiplexer selects the required analog input and routes it through the programmable-gain amplifier into the 14-bit successive-approximation ADC. This architecture supports repeatable multichannel measurements without requiring a separate external multiplexer or analog front-end amplifier. The internal reference reduces calibration complexity by eliminating the need for a separate precision reference in designs that can use the on-chip source.

Typical uses include industrial process monitoring, factory automation, portable measurement instruments, battery-powered data loggers, environmental monitoring, and laboratory test equipment. The device is especially useful when several analog sensors must share one converter and when system size, component count, and power consumption are more important than very high conversion throughput.

Designers should account for analog input range, common-mode limits, programmable-gain settings, serial-interface timing, and the acquisition time associated with successive-approximation conversion. Input filtering and grounding remain important for low-noise measurements, especially when sensor sources have high source impedance or when adjacent channels carry large voltage differences.

This product page consolidates the device architecture, package information, application guidance, verified drop-in alternatives, and practical design considerations. It also highlights where the ADS7870EA differs in resolution so engineers can distinguish a close functional match from a true pin-compatible replacement before committing a PCB design.

के लिए ड्रॉप-इन विकल्प ADS7871IDB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ADS7871IDB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न ADC Resolution, Multiplexer Configuration, Package.

Texas Instruments
ADC Resolution: 12 bit
Multiplexer Configuration: Up to 4 differential or 8 single-ended channels
Package: 28-pin SSOP
इसके साथ तुलना करें ADS7871IDB →

ADS7870EA

✅ ड्रॉप-इन
Texas Instruments
📦 SSOP-28
12 bit · 52 kSPS · Successive approximation (SAR) · Up to 4 differential or 8 single-ended channels · 1, 2, 4, 5, 8, 10, 16, and 20 V/V · 1.15 V, 2.048 V, or 2.5 V · Serial interface · 28-pin SSOP

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ADS7871IDB Maximum Ratings और Electrical Characteristics

ADC Resolution 14 bit
Maximum Sampling Rate 48 kSPS
Multiplexer Configuration 4 differential channels or 8 single-ended channels
Converter Architecture 14-bit successive-approximation ADC
Programmable-Gain Amplifier Integrated programmable-gain amplifier
Internal Reference Precision internal voltage reference
Serial Interface MICROWIRE, QSPI and SPI serial interface
पैकेज 28-pin SSOP (DB)
पिन काउंट 28 pins
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C
Screening Level Industrial
माउंटिंग प्रकार Surface mount

ADS7871IDB 28-pin ssop (db) पिन कॉन्फ़िगरेशन गाइड

ADS7871IDB (28-pin ssop (db) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

ADS7871IDB के लिए 28-pin ssop (db) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ADS7871IDB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ADS7871IDB के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Process Monitoring, Battery-Powered Data Loggers, Environmental Monitoring, Factory Automation Controls, Laboratory Measurement Instruments, Portable Diagnostic Equipment.

🏭

Industrial Process Monitoring

The ADS7871IDB fits industrial process monitoring because one 28-pin device can acquire up to eight single-ended or four differential sensor signals at 14-bit resolution and 48 kSPS. The programmable-gain amplifier is useful when pressure, level, or temperature transmitters operate over widely different voltage ranges. Place the selected inputs behind suitable protection and filtering, then use the internal reference when its accuracy meets the calibration requirement. Compared with a system built from separate multiplexers, amplifiers, and ADCs, this integration reduces board area and component count while preserving an industrial -40 °C to +85 °C temperature range.

📱

Battery-Powered Data Loggers

The ADS7871IDB is suitable for portable data loggers that periodically sample several sensors and then transmit the results. Its integrated multiplexer, programmable-gain amplifier, ADC, and reference reduce the number of active components in a compact analog section. The 48 kSPS capability provides ample margin for common temperature, light, pressure, and electrochemical measurements. Because this is a successive-approximation converter, the system should allow the acquisition interval to include conversion time rather than assuming continuous 48 kSPS conversion. Power budget calculations should also include the reference, analog front end, and host interface rather than the ADC alone.

🧩

Environmental Monitoring

The ADS7871IDB can support multichannel environmental monitoring systems that combine outputs from temperature, humidity, pressure, light, and air-quality sensors. Eight single-ended inputs allow several analog sensors to share the converter, while differential operation supports suitably referenced transducers with common-mode rejection. Its 14-bit conversion resolution provides more than 16,384 quantization levels, which is useful when sensor output spans are relatively narrow. Engineers should still calculate the full signal-chain error budget and use input filtering where long sensor leads can introduce noise or unwanted transient energy.

⚡

Factory Automation Controls

The ADS7871IDB is appropriate for factory automation controllers that monitor analog feedback from pressure switches, position sensors, potentiometers, and process transmitters. Four differential channels are available for noise-sensitive transducer connections, and the integrated PGA can bring smaller signals into the converter's usable range. A serial MICROWIRE, QSPI, or SPI connection allows the device to share PCB space with a digital controller. Layout should keep analog traces short, place filtering near the input pins, and maintain a quiet ground path so switching controllers and digital logic do not degrade the acquired measurement.

🔧

Laboratory Measurement Instruments

The ADS7871IDB can serve as the acquisition front end in compact laboratory instruments measuring multiple low-level analog quantities. Its 48 kSPS rate is suitable for many general-purpose meter and bench-test functions, while the integrated multiplexer and PGA reduce the number of discrete analog components. Differential input operation improves common-mode rejection when the source is balanced and properly referenced. For precision instruments, assess reference accuracy, offset and gain error, input settling, noise, and calibration procedures before setting the measurement resolution. The interface timing should also be checked against the controller used for triggering and data capture.

💊

Portable Diagnostic Equipment

The ADS7871IDB is useful in portable diagnostic equipment that acquires several sensor channels under size and power constraints. Its 28-pin SSOP package accommodates a compact analog board, and the integrated multiplexer, PGA, ADC, and reference minimize external component count. A 14-bit result can support moderate-resolution sensing without requiring a higher-rate or more complex converter. The main design consideration is acquisition timing: the host must issue channel-selection commands, allow the analog input to settle, and then read the conversion result. Input protection should be selected for the sensor voltage range rather than assuming every external source can connect directly.

What is the ADS7871IDB?
The ADS7871IDB is a Texas Instruments 14-bit, 48 kSPS data acquisition system with an integrated multiplexer, programmable-gain amplifier, ADC, and internal reference. It supports four differential or eight single-ended input channels and is packaged in a 28-pin SSOP. According to the Texas Instruments product page, the device combines these measurement functions in one low-power IC.
What resolution and sampling rate does the ADS7871IDB provide?
The ADS7871IDB provides 14-bit resolution and a maximum sampling rate of 48 kSPS. According to the Texas Instruments product page, the integrated converter is a successive-approximation ADC preceded by a programmable-gain amplifier and an 8-to-1 single-ended or 4-to-1 differential multiplexer.
How many analog input channels can the ADS7871IDB measure?
The ADS7871IDB can measure four differential channels or eight single-ended channels. Texas Instruments describes the analog front end as a 4-channel differential or 8-channel single-ended multiplexer, allowing one ADC to sample multiple sensors sequentially while the programmable-gain amplifier conditions the selected signal.
Which serial interfaces does the ADS7871IDB support?
The ADS7871IDB supports MICROWIRE, QSPI, and SPI serial interfaces. According to the Texas Instruments product listing, the DB package is a 28-pin SSOP rated for industrial temperatures from -40 °C to +85 °C. Interface selection should be matched to the host processor and its clocking requirements.
Where can I download the ADS7871IDB datasheet PDF?
The official ADS7871 datasheet is available through the Texas Instruments product page at https://www.ti.com/lit/gpn/ADS7871. The document contains the device description, electrical characteristics, pin information, application details, and ordering information. Use the manufacturer copy for design sign-off and PCB implementation.
Where is the ADS7871IDB pinout located?
The ADS7871IDB pinout is documented in the pin-configuration section of the Texas Instruments ADS7871 datasheet. The device uses a 28-pin SSOP package, designated DB by Texas Instruments. Use the datasheet pin table when assigning analog inputs, reference terminals, digital control signals, and serial data connections.
What is the best drop-in replacement for the ADS7871IDB?
The closest identified pin-compatible functional match is the Texas Instruments ADS7870EA, but it provides 12-bit resolution instead of the ADS7871IDB's 14-bit resolution. Confirm the ADS7870EA datasheet for pin, interface, gain, and supply compatibility before substitution. No five-part drop-in set was established from the available cross-reference results.
Can the ADS7870EA replace the ADS7871IDB?
The ADS7870EA can be considered as a functional alternative because it is identified as an SSOP-28 data acquisition device, but it is not an exact drop-in replacement. Its resolution is 12 bit versus 14 bit for the ADS7871IDB, a 14.3% reduction that can increase quantisation error and limit measurement precision.
ADS7871IDB vs ADS7870EA: which is better for precision measurement?
Choose the ADS7871IDB when measurement resolution is important because it provides 14-bit conversion versus 12-bit resolution in the ADS7870EA. Both devices appear in the same SSOP-28 class, but the ADS7870EA has fewer quantization levels. Verify gain ranges, serial timing, reference behavior, and supply limits in both manufacturer datasheets before PCB reuse.
When should I choose the ADS7871IDB over the ADS7870EA?
Choose the ADS7871IDB when the application benefits from 14-bit resolution rather than the ADS7870EA's 12-bit resolution, particularly for low-range sensor measurements where quantization error affects usable accuracy. The tradeoff is that resolution alone does not guarantee better system accuracy; analog noise, reference quality, source impedance, filtering, and calibration remain important.
Is the ADS7871IDB suitable for industrial sensor monitoring?
The ADS7871IDB is suitable for industrial sensor monitoring because it combines eight single-ended or four differential inputs, selectable gain, a 14-bit ADC, and an internal reference in an industrial-temperature 28-pin SSOP. Its 48 kSPS rate is appropriate for many pressure, temperature, potentiometric, and process-control signals that do not require very high-speed waveform acquisition.
Where can I buy the ADS7871IDB and check its lead time?
Use the Request a Quote form on this page to ask about ADS7871IDB availability, current lead time, minimum order quantity, and the required SSOP-28 delivery format. The request allows purchasing teams to confirm commercial terms directly without relying on a static price or an unverified stock statement.
What is the price of the ADS7871IDB?
The current commercial price for the ADS7871IDB is handled through the Request a Quote form on this page. The form supports quantity-specific sourcing and confirms stock, lead time, and order packaging for the exact ADS7871IDB ordering code before a purchase commitment is made.
Is the ADS7871IDB in stock?
Current ADS7871IDB stock should be confirmed through the Request a Quote form on this page using the required quantity and package shipment details. Inventory can vary by order configuration, so a successful quote request should be used as the commercial confirmation rather than assuming availability from a general catalog listing.
What are the key specifications engineers should know about the ADS7871IDB?
The key ADS7871IDB specifications are 14-bit resolution, 48 kSPS maximum sampling, four differential or eight single-ended inputs, an integrated programmable-gain amplifier, an internal precision reference, and a 28-pin SSOP package. Texas Instruments identifies MICROWIRE, QSPI, and SPI interfaces, with an operating range of -40 °C to +85 °C.
What is an AD7871 equivalent to the ADS7871IDB?
The Analog Devices AD7871 is a related 14-bit converter family, but it should not be treated as a confirmed drop-in replacement without a complete pin and interface comparison. The ADS7871IDB integrates multiplexing, programmable gain, a reference, and serial interface in SSOP-28, whereas the verified listing for the AD7871 does not establish identical board-level compatibility.

के लिए इंजीनियरिंग संदर्भ डेटा ADS7871IDB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ADS7871IDB when a compact, multichannel measurement system needs 14-bit resolution, programmable gain, and an internal reference in a 28-pin SSOP package. It is well suited to industrial monitoring, portable logging, environmental measurement, factory control, and general laboratory instrumentation. The ADS7870EA is the closest identified same-package alternative when 12-bit resolution and a 52 kSPS maximum rate are acceptable, but its lower resolution can increase quantization error in narrow-range measurements. ADS7871IDB ordering variants that differ only in reel, tape, or green-product status are not listed as separate alternatives because they do not add distinct electrical or engineering value. Before substitution, verify the complete pin map, PGA ranges, reference voltage, serial timing, input limits, and acquisition sequence in the relevant manufacturer datasheet.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ADS7870EA
Brand Texas Instruments Texas Instruments
Package 28-pin SSOP (DB) SSOP-28
ADC Resolution 14 bit 12 bit
Maximum Sampling Rate 48 kSPS 52 kSPS
Multiplexer Configuration 4 differential or 8 single-ended channels 4 differential or 8 single-ended channels
Converter Architecture 14-bit successive-approximation ADC 12-bit successive-approximation ADC
Programmable-Gain Amplifier Integrated Integrated
Internal Reference Precision internal voltage reference 2.5 V internal reference
Serial Interface MICROWIRE, QSPI and SPI SPI-compatible serial interface

मुख्य विशेषताएँ

  • Higher conversion resolution (बनामADS7870EA)
  • Complete multichannel acquisition front end (बनामADS7870EA)
  • Multiple supported serial interfaces (बनामADS7870EA)

डिज़ाइन नोट्स

Route analog inputs directly from their connector or sensor interface to the corresponding ADS7871IDB pins, avoiding shared traces with digital clocks and switching nodes. Place input filtering and protection near the device or connector as appropriate, and provide a low-impedance ground return. Because the converter uses successive approximation, verify settling time after changing the multiplexed channel before initiating conversion.

Do not treat the 14-bit converter resolution as the complete measurement accuracy. Include offset error, gain error, reference accuracy, input noise, source impedance, and leakage in the error budget. Confirm that each sensor output remains within the selected PGA range and the absolute analog input limits. Differential inputs also require correct common-mode voltage and return connections.

Keep the serial interface traces short and driven with levels appropriate for the host device. Apply controlled clock timing and configure the interface mode required by the ADS7871IDB. If sensors have long leads, use shielding or differential routing and add input filtering close to the ADC. These measures reduce coupling from motors, relays, display drivers, and switching power converters.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The industrial operating-temperature range is stated, but specific RoHS, REACH, halogen-free, conflict-minerals, and automotive qualification statements were not established for the exact ADS7871IDB ordering code. AEC-Q100 is not applicable to this catalog configuration.

डेटा सत्यापन तिथि: 2026-11-18 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ADS7871IDB datasheet ADS7871IDB pinout ADS7871IDB datasheet pdf ADS7871IDB specifications ADS7871IDB SSOP-28 ADS7871IDB equivalent ADS7871IDB replacement ADS7871IDB cross reference ADS7871IDB vs ADS7870EA ADS7871IDB 14-bit ADC ADS7871IDB 48 kSPS ADS7871IDB industrial sensor monitoring ADS7871IDB price ADS7871IDB stock Texas Instruments ADS7871IDB

संबंधित कंपोनेंट्स और शब्द

Texas Instruments ADS7871IDB ADS7871 ADS7870EA Analog Devices AD7871 data acquisition system DAS analog-to-digital converter ADC successive-approximation ADC multiplexer programmable-gain amplifier PGA precision internal voltage reference MICROWIRE QSPI SPI SSOP-28 DB package surface mount industrial temperature range 14-bit resolution 48 kSPS
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें