AKM (Asahi Kasei Microdevices)

AK5380VT - 24-Bit 96kHz Stereo Audio ADC | AKM

MPN: AK5380VT ✗ जीवन की समाप्ति
2.7V to 5.5V Vdss 16-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

AK5380VT अवलोकन

The Asahi Kasei Microdevices AK5380VT is a 24-bit stereo audio analog-to-digital converter with a 4kHz to 96kHz sampling-rate range and a 16-pin TSSOP package. It uses enhanced dual-bit delta-sigma conversion to provide high-resolution digital audio output through an I2S interface. The AK5380VT is intended for high-end audio systems requiring two-channel conversion and digital sample rates extending to 96kHz.

An audio ADC is a specialized data-converter IC that converts continuous analog voltage signals into digital words suitable for processing, storage, or transmission. In the signal-chain hierarchy, the AK5380VT belongs to the ADC and DAC category, operates as a stereo audio converter, and ultimately serves as a semiconductor interface device between analog audio circuitry and a digital audio subsystem.

The device supports a 24-bit resolution and a maximum sampling rate of 96kHz, while its enhanced dual-bit delta-sigma architecture is intended to improve conversion accuracy and implementation economy. It accepts single-ended analog input according to the AK5380VT product description. Digital audio data is delivered through an I2S-compatible interface, allowing connection to digital audio processors, receivers, recorders, and other systems capable of receiving the required clock and data signals.

The AK5380VT operates from a 2.7V to 5.5V supply range and is specified for temperatures from -40°C to 85°C. Its 16-pin TSSOP package supports surface-mount assembly. The analog input stage is the primary thermal and layout-sensitive area, while the digital interface requires careful clock and signal routing to prevent data corruption. Power, ground, and analog-input connections should be arranged according to the manufacturer datasheet.

Typical uses include high-end digital audio equipment, multichannel sound systems, audio recording equipment, and consumer-electronics products requiring stereo conversion at rates up to 96kHz. Its single-ended input architecture can simplify source interfacing when the analog front end can be referenced cleanly to the converter's ground network.

For a new design, begin with the manufacturer pin description and application circuit, then verify input range, output logic levels, clocking, and digital interface mode before layout. Place analog and digital return currents separately, decouple each supply domain near the device, and route the I2S signals away from high-current switching nodes.

This product page consolidates the AK5380VT's core electrical characteristics, interface details, verified source links, and application-oriented design guidance. It also distinguishes documented function and supply information from replacement decisions, where pin compatibility and interface timing must be confirmed before a substitution is approved.

के लिए ड्रॉप-इन विकल्प AK5380VT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

AK5380VT Maximum Ratings और Electrical Characteristics

Device Type Stereo audio analog-to-digital converter
Converter Architecture Enhanced dual-bit delta-sigma
रेज़ोल्यूशन 24 bit
Maximum Sampling Rate 96kHz
Minimum Sampling Rate 4kHz
Channel Count 2 channels
Digital Interface I2S
Analog Input Type Single-ended
Supply Voltage Range 2.7V to 5.5V
ऑपरेटिंग तापमान रेंज -40°C to 85°C
पैकेज 16-pin TSSOP
माउंटिंग प्रकार Surface mount
Power-Up Sequence Between VA and VD Not critical
Number of Analog Supplies 2 supplies: VA and VD

AK5380VT 16-pin tssop पिन कॉन्फ़िगरेशन गाइड

AK5380VT (16-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

AK5380VT के लिए 16-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: AK5380VT.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

AK5380VT के लिए उपयुक्त है 6 अनुप्रयोगs: High-End Digital Audio Systems, Professional Audio Recording Equipment, Multichannel Sound Systems, Consumer Audio Receivers, Audio Test and Measurement, Digital Musical Instrument Interfaces.

🎧

High-End Digital Audio Systems

The AK5380VT fits a stereo digital-audio front end that requires 24-bit conversion and sample rates from 4kHz to 96kHz. Place it after the analog preamplifier and before an I2S-capable digital audio processor. The converter can support conventional CD-rate as well as higher-rate audio workflows, while its single-ended inputs simplify connection to a suitably referenced source stage. Clocking, grounding, and decoupling must follow the AKM reference design to preserve converter behavior.

🎙️

Professional Audio Recording Equipment

The AK5380VT is suitable for recording equipment that captures two analog channels as 24-bit digital audio and requires operation up to 96kHz. It can follow a balanced or unbalanced preamplifier, provided the source is adjusted to the converter's supported analog input range and impedance. An I2S receiver can then capture the converter output. The design must provide clean supplies from 2.7V to 5.5V and separate analog and digital return paths to minimize noise coupling.

🔊

Multichannel Sound Systems

Multiple AK5380VT converters can be used in multichannel equipment when each stereo pair requires the same 24-bit conversion performance and a 4kHz-to-96kHz sample-rate range. Each converter needs its own I2S data connection, clock distribution, supply decoupling, and analog routing. The I2S interface supports structured digital audio distribution, but channel synchronization and clock jitter must be engineered at the system level so simultaneous converters retain coherent timing.

📺

Consumer Audio Receivers

The AK5380VT can serve as the analog-to-digital stage in a consumer receiver that accepts legacy line-level audio and processes it digitally. Its single-ended stereo input supports straightforward routing from source amplifiers, while I2S output can feed an audio processor or digital amplifier controller. The 2.7V-to-5.5V operating range permits integration across common low-voltage system architectures. Component layout should keep the analog input path away from switching regulators and digital clock lines.

🔧

Audio Test and Measurement

The AK5380VT can support two-channel audio measurement and analysis equipment when the system needs 24-bit digital samples at rates up to 96kHz. The I2S output can feed a digital capture or analysis section, while the single-ended inputs accept conditioned test signals. Measurement accuracy still depends on the external source, anti-alias filtering, clock quality, analog reference design, and PCB grounding. The manufacturer application circuit should be used as the baseline for each channel.

🎹

Digital Musical Instrument Interfaces

The AK5380VT is applicable to digital musical instrument and accessory interfaces that capture stereo analog output and transport it as 24-bit I2S data. Its sampling-rate range covers 4kHz through 96kHz, allowing the same converter to support different operating modes. The analog input stage should provide adequate signal level and low distortion, while the digital interface requires a correctly timed master clock and data connection. Grounding and decoupling should be completed before system-level calibration.

What is the AK5380VT?
The AK5380VT is a 24-bit stereo audio ADC that converts two single-ended analog audio channels into digital data using an I2S interface. According to the AKM AK5380 datasheet, it accepts sampling rates from 4kHz to 96kHz and uses enhanced dual-bit delta-sigma conversion. The converter is packaged in a 16-pin TSSOP and is intended for high-end audio systems that require high-resolution stereo capture at conventional, CD, and higher sampling rates.
What are the key specifications of AK5380VT that engineers should know?
The AK5380VT is a 24-bit, two-channel audio ADC supporting sampling rates from 4kHz to 96kHz with a 2.7V to 5.5V supply range. According to the AKM AK5380 datasheet, it uses enhanced dual-bit delta-sigma technology, accepts single-ended inputs, and provides an I2S digital interface. Its specified operating-temperature range is -40°C to 85°C, and the device is supplied in a surface-mount 16-pin TSSOP package.
Where can I download the AK5380VT datasheet PDF?
The AK5380VT datasheet PDF is available from the AK5380VT document listing on Datasheets.com at https://www.datasheets.com/asahi-kasei-micro/ak5380vt/datasheet.pdf. The document identifies the device as a 24-bit, 96kHz stereo audio ADC and contains the electrical characteristics, pin descriptions, application information, and supply arrangements. Use the pin-description table and application schematic in that manufacturer document when assigning PCB connections.
Where can I find the AK5380VT pinout?
The AK5380VT pinout is defined in the pin-description section of the AKM AK5380 datasheet at https://www.datasheets.com/asahi-kasei-micro/ak5380vt/datasheet.pdf. The device uses a 16-pin TSSOP with separate VA and VD supplies, analog input connections, ground pins, and digital audio interface signals. Because accurate numbering is essential for PCB layout, assign tracks directly from the numbered pin table and verify the exposed device orientation against the package drawing.
What is the supply voltage of AK5380VT?
The AK5380VT operates from 2.7V to 5.5V. The manufacturer documentation distinguishes the analog supply VA from the digital supply VD and states that their power-up sequence is not critical. Each supply should still be decoupled near the relevant device pins, and the grounding strategy should prevent analog return currents from sharing the paths used by the digital audio interface.
Can AK5380VT be used for 96kHz audio?
Yes, the AK5380VT supports sampling rates up to 96kHz. The manufacturer identifies the device as a 24-bit stereo converter with a 4kHz-to-96kHz sampling-rate range. Achieving correct operation at 96kHz requires suitable master and system clocks, valid I2S framing, stable analog input drive, and power layout that meets the requirements shown in the AK5380 datasheet application information.
What difference is there between AK5380VT and AK5351VF?
The AK5380VT is a 24-bit, 96kHz audio ADC in a 16-pin TSSOP, while the documented AK5351VF is a 20-bit Enhanced Delta-Sigma ADC in a 24-pin VSOP. The comparison identifies differences in resolution, package, and pin count, so AK5351VF is not a pin-for-pin drop-in replacement for AK5380VT. A design substitution requires a PCB and interface review rather than a footprint-only change.
When should I choose AK5380VT over another stereo audio ADC?
Choose the AK5380VT when a design specifically requires a 24-bit stereo ADC with single-ended inputs, I2S output, and operation from 4kHz to 96kHz in a 16-pin TSSOP. According to the AKM AK5380 datasheet, its enhanced dual-bit delta-sigma architecture targets high-end audio conversion. It should not be selected solely for a lower pin count because digital timing, supply rails, analog range, and clock requirements must also match the target system.
Is AK5380VT suitable for high-end audio equipment?
Yes, the AK5380VT is specifically described by the manufacturer as suitable for high-end audio systems. Its 24-bit resolution and sampling-rate support up to 96kHz align with high-resolution digital audio conversion, while the I2S output supports connection to digital audio processing hardware. Actual signal quality still depends on analog front-end design, clocking, grounding, decoupling, and implementation of the manufacturer's reference circuit.
What can replace AK5380VT?
No confirmed drop-in replacement for the AK5380VT is identified by the available cross-reference information. The AK5351VF is a related audio ADC but uses a different 24-pin VSOP package and a 20-bit resolution, so it cannot be treated as a direct replacement. A valid replacement must match the 16-pin TSSOP footprint, pin functions, 24-bit conversion capability, I2S timing, 4kHz-to-96kHz sampling range, and analog input requirements.
Is the AK5380VT the same as AK5351VF?
No, the AK5380VT and AK5351VF are not the same device and are not a direct drop-in pair. The AK5380VT is a 24-bit converter in a 16-pin TSSOP, whereas the AK5351VF is a 20-bit converter in a 24-pin VSOP. Their package, pin count, and conversion resolution differ, so a board designed around AK5380VT cannot use AK5351VF without schematic and PCB changes.
Is AK5380VT in stock?
Current stock status should be requested through the Request a Quote form on this page rather than inferred from a listing. The AK5380VT is marked obsolete in one product listing, while other listings also describe inventory, so the practical availability can change by lot, region, and traceability requirement. Include the required quantity, target date, and acceptable condition when submitting the request.
What is the price of AK5380VT?
The current AK5380VT price is not published as a static figure on this page because quotation-based and legacy-part pricing can vary by quantity, condition, and lot traceability. Use the Request a Quote form on this page to request current pricing for the exact AK5380VT marking and package. Include your required order quantity, production schedule, and any inspection or traceability requirements with the request.
What is the lead time for AK5380VT?
The current AK5380VT lead time should be confirmed through the Request a Quote form on this page. As a legacy 24-bit audio ADC with an observed obsolete listing, its supply status may depend on remaining factory or channel inventory rather than a current production schedule. Provide the required quantity and target delivery date so the supplier can confirm availability, condition, lot traceability, and the committed schedule.
Where to buy AK5380VT online?
Use the Request a Quote form on this page to request the AK5380VT from XAIPART. Specify the required quantity, desired delivery date, acceptable component condition, and any lot-traceability requirements. The AK5380VT is identified in the product information as a 16-pin TSSOP, 24-bit, 96kHz stereo audio ADC, so the requested marking and package should match those requirements.
Does the AK5380VT comply with RoHS or REACH?
The RoHS and REACH status of the AK5380VT is not established by the available product information and is recorded as unknown. Because this part also has an observed obsolete listing, compliance documentation should be tied to the specific manufacturer lot rather than inferred from the current product category. Request the applicable material or quality documentation when purchasing and confirm it against the lot being quoted.

के लिए इंजीनियरिंग संदर्भ डेटा AK5380VT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the AK5380VT when a legacy design specifically calls for a 24-bit stereo audio ADC with single-ended inputs, I2S output, a 4kHz-to-96kHz sampling-rate range, and a 16-pin TSSOP footprint. Its two-supply arrangement and enhanced dual-bit delta-sigma architecture suit high-end audio and multichannel conversion systems, but new production should be reviewed carefully because the part is marked obsolete in one listing. Do not select it merely as a generic ADC when lower sample rates, a different digital format, or a smaller package would be sufficient. The AK5351VF is not a drop-in choice because it is documented as a 20-bit part in a 24-pin VSOP. For any replacement, require the same footprint, pin functions, analog range, supply arrangement, I2S timing, and sampling-rate coverage before modifying a design.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Device Type Stereo audio ADC
Brand Asahi Kasei Microdevices
Package 16-pin TSSOP
Resolution 24 bit
Maximum Sampling Rate 96kHz
Minimum Sampling Rate 4kHz
Digital Interface I2S
Analog Input Type Single-ended
Supply Voltage Range 2.7V to 5.5V
Operating Temperature Range -40°C to 85°C

मुख्य विशेषताएँ

  • High-resolution stereo conversion with an extended sampling-rate range (बनामAK5351VF)
  • Single-ended stereo input architecture (बनामAK5351VF)
  • Compact 16-pin TSSOP implementation (बनामAK5351VF)

डिज़ाइन नोट्स

Route the AK5380VT analog input traces directly from the source circuitry and keep them away from I2S data, clock, and switching-converter nodes. Place the input-network components close to the converter where practical. Use a continuous ground reference beneath the analog section and provide a direct, low-impedance return for the analog supply. The separate VA and VD supply networks should each receive local high-frequency decoupling, while their power-up order is not critical according to the manufacturer datasheet.

The I2S interface requires stable master-clock and data timing across the full 4kHz-to-96kHz sampling range. Keep clock traces short, maintain a continuous reference plane, and avoid routing them parallel to noisy analog or switching paths for extended distances. Confirm output logic levels, data validity timing, and the required clock relationship against the AK5380 datasheet before connecting the converter to the digital receiver.

Do not treat a related audio ADC as a drop-in replacement solely because it uses a delta-sigma architecture. The documented AK5351VF differs from the AK5380VT in resolution and package, requiring both schematic and PCB changes. For any proposed AK5380VT substitute, verify pin functions, analog input range, supply rails, I2S timing, supported sampling rates, package dimensions, and exposed-pin requirements before approving a substitution.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this legacy part. AEC-Q100 is not applicable to this audio converter.

डेटा सत्यापन तिथि: 2026-11-11 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

AK5380VT datasheet AK5380VT pinout AK5380VT datasheet pdf AK5380VT 16-TSSOP AK5380VT 24-bit ADC AK5380VT 96kHz I2S AK5380VT equivalent AK5380VT replacement AK5380VT cross reference AK5380VT vs AK5351VF AK5380VT price AK5380VT stock Asahi Kasei Microdevices AK5380VT AK5380VT stereo audio ADC AK5380VT application circuit

संबंधित कंपोनेंट्स और शब्द

Asahi Kasei Microdevices AKM Semiconductor AK5380VT AK5351VF audio analog-to-digital converter ADC delta-sigma converter enhanced dual-bit delta-sigma stereo audio ADC 24-bit resolution 96kHz sampling rate I2S interface single-ended input VA analog supply VD digital supply 16-pin TSSOP TSSOP package family surface-mount package high-end audio system multichannel audio digital audio recording analog-to-digital conversion semiconductor audio signal chain
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें