AK5380VT - 24-Bit 96kHz Stereo Audio ADC | AKM
MPN: AK5380VT ✗ Cuối đờiAK5380VT Tóm tắt
An audio ADC is a specialized data-converter IC that converts continuous analog voltage signals into digital words suitable for processing, storage, or transmission. In the signal-chain hierarchy, the AK5380VT belongs to the ADC and DAC category, operates as a stereo audio converter, and ultimately serves as a semiconductor interface device between analog audio circuitry and a digital audio subsystem.
The device supports a 24-bit resolution and a maximum sampling rate of 96kHz, while its enhanced dual-bit delta-sigma architecture is intended to improve conversion accuracy and implementation economy. It accepts single-ended analog input according to the AK5380VT product description. Digital audio data is delivered through an I2S-compatible interface, allowing connection to digital audio processors, receivers, recorders, and other systems capable of receiving the required clock and data signals.
The AK5380VT operates from a 2.7V to 5.5V supply range and is specified for temperatures from -40°C to 85°C. Its 16-pin TSSOP package supports surface-mount assembly. The analog input stage is the primary thermal and layout-sensitive area, while the digital interface requires careful clock and signal routing to prevent data corruption. Power, ground, and analog-input connections should be arranged according to the manufacturer datasheet.
Typical uses include high-end digital audio equipment, multichannel sound systems, audio recording equipment, and consumer-electronics products requiring stereo conversion at rates up to 96kHz. Its single-ended input architecture can simplify source interfacing when the analog front end can be referenced cleanly to the converter's ground network.
For a new design, begin with the manufacturer pin description and application circuit, then verify input range, output logic levels, clocking, and digital interface mode before layout. Place analog and digital return currents separately, decouple each supply domain near the device, and route the I2S signals away from high-current switching nodes.
This product page consolidates the AK5380VT's core electrical characteristics, interface details, verified source links, and application-oriented design guidance. It also distinguishes documented function and supply information from replacement decisions, where pin compatibility and interface timing must be confirmed before a substitution is approved.
Bộ thay thế dễ dàng lắp đặt cho AK5380VT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếAK5380VT Tỷ lệ tối đa & tính chất điện
| Device Type | Stereo audio analog-to-digital converter |
| Converter Architecture | Enhanced dual-bit delta-sigma |
| Độ phân giải | 24 bit |
| Maximum Sampling Rate | 96kHz |
| Minimum Sampling Rate | 4kHz |
| Channel Count | 2 channels |
| Digital Interface | I2S |
| Analog Input Type | Single-ended |
| Supply Voltage Range | 2.7V to 5.5V |
| Khoảng nhiệt độ hoạt động | -40°C to 85°C |
| Hộp | 16-pin TSSOP |
| Kiểu lắp đặt | Surface mount |
| Power-Up Sequence Between VA and VD | Not critical |
| Number of Analog Supplies | 2 supplies: VA and VD |
Hướng dẫn cấu hình chân AK5380VT 16-pin tssop
Cấu hình chân cho AK5380VT (16-pin tssop gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho AK5380VT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
AK5380VT phù hợp cho 6 Áp dụngs: High-End Digital Audio Systems, Professional Audio Recording Equipment, Multichannel Sound Systems, Consumer Audio Receivers, Audio Test and Measurement, Digital Musical Instrument Interfaces.
High-End Digital Audio Systems
The AK5380VT fits a stereo digital-audio front end that requires 24-bit conversion and sample rates from 4kHz to 96kHz. Place it after the analog preamplifier and before an I2S-capable digital audio processor. The converter can support conventional CD-rate as well as higher-rate audio workflows, while its single-ended inputs simplify connection to a suitably referenced source stage. Clocking, grounding, and decoupling must follow the AKM reference design to preserve converter behavior.
Được đề xuất
Professional Audio Recording Equipment
The AK5380VT is suitable for recording equipment that captures two analog channels as 24-bit digital audio and requires operation up to 96kHz. It can follow a balanced or unbalanced preamplifier, provided the source is adjusted to the converter's supported analog input range and impedance. An I2S receiver can then capture the converter output. The design must provide clean supplies from 2.7V to 5.5V and separate analog and digital return paths to minimize noise coupling.
Được đề xuất
Multichannel Sound Systems
Multiple AK5380VT converters can be used in multichannel equipment when each stereo pair requires the same 24-bit conversion performance and a 4kHz-to-96kHz sample-rate range. Each converter needs its own I2S data connection, clock distribution, supply decoupling, and analog routing. The I2S interface supports structured digital audio distribution, but channel synchronization and clock jitter must be engineered at the system level so simultaneous converters retain coherent timing.
Được đề xuất
Consumer Audio Receivers
The AK5380VT can serve as the analog-to-digital stage in a consumer receiver that accepts legacy line-level audio and processes it digitally. Its single-ended stereo input supports straightforward routing from source amplifiers, while I2S output can feed an audio processor or digital amplifier controller. The 2.7V-to-5.5V operating range permits integration across common low-voltage system architectures. Component layout should keep the analog input path away from switching regulators and digital clock lines.
Được đề xuất
Audio Test and Measurement
The AK5380VT can support two-channel audio measurement and analysis equipment when the system needs 24-bit digital samples at rates up to 96kHz. The I2S output can feed a digital capture or analysis section, while the single-ended inputs accept conditioned test signals. Measurement accuracy still depends on the external source, anti-alias filtering, clock quality, analog reference design, and PCB grounding. The manufacturer application circuit should be used as the baseline for each channel.
Được đề xuất
Digital Musical Instrument Interfaces
The AK5380VT is applicable to digital musical instrument and accessory interfaces that capture stereo analog output and transport it as 24-bit I2S data. Its sampling-rate range covers 4kHz through 96kHz, allowing the same converter to support different operating modes. The analog input stage should provide adequate signal level and low distortion, while the digital interface requires a correctly timed master clock and data connection. Grounding and decoupling should be completed before system-level calibration.
Được đề xuất
Dữ liệu tham khảo kỹ thuật cho AK5380VT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Device Type | Stereo audio ADC |
| Brand | Asahi Kasei Microdevices |
| Package | 16-pin TSSOP |
| Resolution | 24 bit |
| Maximum Sampling Rate | 96kHz |
| Minimum Sampling Rate | 4kHz |
| Digital Interface | I2S |
| Analog Input Type | Single-ended |
| Supply Voltage Range | 2.7V to 5.5V |
| Operating Temperature Range | -40°C to 85°C |
Bảo phân biệt quan trọng
- High-resolution stereo conversion with an extended sampling-rate range (vsAK5351VF)
- Single-ended stereo input architecture (vsAK5351VF)
- Compact 16-pin TSSOP implementation (vsAK5351VF)
Ghi chú thiết kế
Route the AK5380VT analog input traces directly from the source circuitry and keep them away from I2S data, clock, and switching-converter nodes. Place the input-network components close to the converter where practical. Use a continuous ground reference beneath the analog section and provide a direct, low-impedance return for the analog supply. The separate VA and VD supply networks should each receive local high-frequency decoupling, while their power-up order is not critical according to the manufacturer datasheet.
The I2S interface requires stable master-clock and data timing across the full 4kHz-to-96kHz sampling range. Keep clock traces short, maintain a continuous reference plane, and avoid routing them parallel to noisy analog or switching paths for extended distances. Confirm output logic levels, data validity timing, and the required clock relationship against the AK5380 datasheet before connecting the converter to the digital receiver.
Do not treat a related audio ADC as a drop-in replacement solely because it uses a delta-sigma architecture. The documented AK5351VF differs from the AK5380VT in resolution and package, requiring both schematic and PCB changes. For any proposed AK5380VT substitute, verify pin functions, analog input range, supply rails, I2S timing, supported sampling rates, package dimensions, and exposed-pin requirements before approving a substitution.
Thông tin tuân thủ
The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this legacy part. AEC-Q100 is not applicable to this audio converter.