AK5380VT - 24-Bit 96kHz Stereo Audio ADC | AKM
料号: AK5380VT ✗ 停产AK5380VT 概述
An audio ADC is a specialized data-converter IC that converts continuous analog voltage signals into digital words suitable for processing, storage, or transmission. In the signal-chain hierarchy, the AK5380VT belongs to the ADC and DAC category, operates as a stereo audio converter, and ultimately serves as a semiconductor interface device between analog audio circuitry and a digital audio subsystem.
The device supports a 24-bit resolution and a maximum sampling rate of 96kHz, while its enhanced dual-bit delta-sigma architecture is intended to improve conversion accuracy and implementation economy. It accepts single-ended analog input according to the AK5380VT product description. Digital audio data is delivered through an I2S-compatible interface, allowing connection to digital audio processors, receivers, recorders, and other systems capable of receiving the required clock and data signals.
The AK5380VT operates from a 2.7V to 5.5V supply range and is specified for temperatures from -40°C to 85°C. Its 16-pin TSSOP package supports surface-mount assembly. The analog input stage is the primary thermal and layout-sensitive area, while the digital interface requires careful clock and signal routing to prevent data corruption. Power, ground, and analog-input connections should be arranged according to the manufacturer datasheet.
Typical uses include high-end digital audio equipment, multichannel sound systems, audio recording equipment, and consumer-electronics products requiring stereo conversion at rates up to 96kHz. Its single-ended input architecture can simplify source interfacing when the analog front end can be referenced cleanly to the converter's ground network.
For a new design, begin with the manufacturer pin description and application circuit, then verify input range, output logic levels, clocking, and digital interface mode before layout. Place analog and digital return currents separately, decouple each supply domain near the device, and route the I2S signals away from high-current switching nodes.
This product page consolidates the AK5380VT's core electrical characteristics, interface details, verified source links, and application-oriented design guidance. It also distinguishes documented function and supply information from replacement decisions, where pin compatibility and interface timing must be confirmed before a substitution is approved.
直接替换替代料: AK5380VT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料AK5380VT 最大额定值与电气特性
| Device Type | Stereo audio analog-to-digital converter |
| Converter Architecture | Enhanced dual-bit delta-sigma |
| 分辨率 | 24 bit |
| Maximum Sampling Rate | 96kHz |
| Minimum Sampling Rate | 4kHz |
| Channel Count | 2 channels |
| Digital Interface | I2S |
| Analog Input Type | Single-ended |
| Supply Voltage Range | 2.7V to 5.5V |
| 工作温度范围 | -40°C to 85°C |
| 封装 | 16-pin TSSOP |
| 安装类型 | Surface mount |
| Power-Up Sequence Between VA and VD | Not critical |
| Number of Analog Supplies | 2 supplies: VA and VD |
AK5380VT 16-pin tssop 引脚配置指南
AK5380VT(16-pin tssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: AK5380VT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
AK5380VT 适用于 6 应用s: High-End Digital Audio Systems, Professional Audio Recording Equipment, Multichannel Sound Systems, Consumer Audio Receivers, Audio Test and Measurement, Digital Musical Instrument Interfaces.
High-End Digital Audio Systems
The AK5380VT fits a stereo digital-audio front end that requires 24-bit conversion and sample rates from 4kHz to 96kHz. Place it after the analog preamplifier and before an I2S-capable digital audio processor. The converter can support conventional CD-rate as well as higher-rate audio workflows, while its single-ended inputs simplify connection to a suitably referenced source stage. Clocking, grounding, and decoupling must follow the AKM reference design to preserve converter behavior.
推荐
Professional Audio Recording Equipment
The AK5380VT is suitable for recording equipment that captures two analog channels as 24-bit digital audio and requires operation up to 96kHz. It can follow a balanced or unbalanced preamplifier, provided the source is adjusted to the converter's supported analog input range and impedance. An I2S receiver can then capture the converter output. The design must provide clean supplies from 2.7V to 5.5V and separate analog and digital return paths to minimize noise coupling.
推荐
Multichannel Sound Systems
Multiple AK5380VT converters can be used in multichannel equipment when each stereo pair requires the same 24-bit conversion performance and a 4kHz-to-96kHz sample-rate range. Each converter needs its own I2S data connection, clock distribution, supply decoupling, and analog routing. The I2S interface supports structured digital audio distribution, but channel synchronization and clock jitter must be engineered at the system level so simultaneous converters retain coherent timing.
推荐
Consumer Audio Receivers
The AK5380VT can serve as the analog-to-digital stage in a consumer receiver that accepts legacy line-level audio and processes it digitally. Its single-ended stereo input supports straightforward routing from source amplifiers, while I2S output can feed an audio processor or digital amplifier controller. The 2.7V-to-5.5V operating range permits integration across common low-voltage system architectures. Component layout should keep the analog input path away from switching regulators and digital clock lines.
推荐
Audio Test and Measurement
The AK5380VT can support two-channel audio measurement and analysis equipment when the system needs 24-bit digital samples at rates up to 96kHz. The I2S output can feed a digital capture or analysis section, while the single-ended inputs accept conditioned test signals. Measurement accuracy still depends on the external source, anti-alias filtering, clock quality, analog reference design, and PCB grounding. The manufacturer application circuit should be used as the baseline for each channel.
推荐
Digital Musical Instrument Interfaces
The AK5380VT is applicable to digital musical instrument and accessory interfaces that capture stereo analog output and transport it as 24-bit I2S data. Its sampling-rate range covers 4kHz through 96kHz, allowing the same converter to support different operating modes. The analog input stage should provide adequate signal level and low distortion, while the digital interface requires a correctly timed master clock and data connection. Grounding and decoupling should be completed before system-level calibration.
推荐
工程参考数据: AK5380VT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Device Type | Stereo audio ADC |
| Brand | Asahi Kasei Microdevices |
| Package | 16-pin TSSOP |
| Resolution | 24 bit |
| Maximum Sampling Rate | 96kHz |
| Minimum Sampling Rate | 4kHz |
| Digital Interface | I2S |
| Analog Input Type | Single-ended |
| Supply Voltage Range | 2.7V to 5.5V |
| Operating Temperature Range | -40°C to 85°C |
关键差异点
- High-resolution stereo conversion with an extended sampling-rate range (对比 AK5351VF)
- Single-ended stereo input architecture (对比 AK5351VF)
- Compact 16-pin TSSOP implementation (对比 AK5351VF)
设计说明
Route the AK5380VT analog input traces directly from the source circuitry and keep them away from I2S data, clock, and switching-converter nodes. Place the input-network components close to the converter where practical. Use a continuous ground reference beneath the analog section and provide a direct, low-impedance return for the analog supply. The separate VA and VD supply networks should each receive local high-frequency decoupling, while their power-up order is not critical according to the manufacturer datasheet.
The I2S interface requires stable master-clock and data timing across the full 4kHz-to-96kHz sampling range. Keep clock traces short, maintain a continuous reference plane, and avoid routing them parallel to noisy analog or switching paths for extended distances. Confirm output logic levels, data validity timing, and the required clock relationship against the AK5380 datasheet before connecting the converter to the digital receiver.
Do not treat a related audio ADC as a drop-in replacement solely because it uses a delta-sigma architecture. The documented AK5351VF differs from the AK5380VT in resolution and package, requiring both schematic and PCB changes. For any proposed AK5380VT substitute, verify pin functions, analog input range, supply rails, I2S timing, supported sampling rates, package dimensions, and exposed-pin requirements before approving a substitution.
合规信息
The available product information does not establish RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for this legacy part. AEC-Q100 is not applicable to this audio converter.