ATF16V8CZ-15XC - 250-Gate 15ns EEPLD | Microchip
MPN: ATF16V8CZ-15XC ✓ सक्रियATF16V8CZ-15XC अवलोकन
An EEPLD is a user-programmable logic device that stores its configuration in electrically erasable memory. Compared with a mask-programmed PAL or GAL, the ATF16V8CZ-15XC can be programmed or reprogrammed during design, prototyping, and production. Its macrocell architecture supports logic functions that would otherwise require multiple conventional gate packages, helping reduce board area and simplify inventory management.
Key characteristics include a 12 ns maximum pin-to-pin delay, low-power 25 uA standby current, CMOS and TTL-compatible inputs and outputs, and support for zero-power operation according to the Microchip product family description. The device can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, providing a practical migration path for older programmable-logic designs.
The ATF16V8C architecture uses eight outputs, with each output allocated eight product terms. Software automatically configures multiple operating modes, allowing the same device to implement register, combinatorial, and complex logic functions. This flexibility is useful when a design combines address decoding, control sequencing, latch functions, and interface adaptation in a small embedded system.
Typical applications include industrial control logic, legacy peripheral adaptation, instrumentation, test-equipment interfaces, embedded system control, and small protocol or timing controllers. The 20-pin TSSOP package is easy to place on conventional PCB layouts, while the 5 V supply and CMOS/TTL-compatible interfaces simplify integration with established digital systems.
When designing around this device, verify the exact pin assignments, programming architecture, and supported logic functions in the manufacturer datasheet before routing a replacement PCB. Use the device only when its macrocell resources and timing are sufficient; pin compatibility alone does not guarantee that an alternative can reproduce the original fuse map or programmed output behavior. This page combines the manufacturer family specifications, package information, practical applications, and the available substitution context for faster engineering review.
के लिए ड्रॉप-इन विकल्प ATF16V8CZ-15XC — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATF16V8CZ-15XC (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Package, Standby Current, Maximum Pin-to-Pin Delay, Supply Voltage.
ATF16V8CZ-15XU
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
ATF16V8CZ-15SC
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →ATF16V8CZ-15XC Maximum Ratings और Electrical Characteristics
| Device Type | High-performance electrically erasable programmable logic device |
| Architecture | 250-gate EEPLD |
| Macrocells | 8 |
| Inputs | Up to 16 |
| I/O Pins | 8 |
| सप्लाई वोल्टेज | 5 V |
| Maximum Pin-to-Pin Delay | 12 ns |
| Standby Current | 25 uA |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Configuration Technology | Electrically erasable programmable logic |
| पैकेज | 20-pin TSSOP |
| Logic Emulation | Many 20-pin PALs and most 20-pin combinatorial PLDs |
| Operating Modes | Three software-configured modes of operation |
| Output Product Terms | 8 product terms per output |
| Zero-Power Support | Zero-power Vcc operation |
| Green Package | Green package |
| Programming | Low-cost easy-to-use software tools |
ATF16V8CZ-15XC green package पिन कॉन्फ़िगरेशन गाइड
ATF16V8CZ-15XC (green package पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATF16V8CZ-15XC.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
ATF16V8CZ-15XC के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control and Sequencing, Legacy Peripheral Interface, Test and Measurement Instrumentation, Protocol and Timing Controller, Embedded System Glue Logic, Automotive and Transportation Logic.
Industrial Control and Sequencing
The ATF16V8CZ-15XC is useful for compact industrial control blocks that require a 5 V interface, programmable combinational logic, and deterministic timing. Its 8 macrocells can implement control sequencing, state decoding, interlock logic, and output timing without a large collection of fixed gate packages. The 12 ns maximum pin-to-pin delay supports short control paths, while CMOS and TTL-compatible I/O allows connection to established 5 V industrial logic. The electrically erasable architecture also permits design iterations during equipment development.
अनुशंसित
Legacy Peripheral Interface
ATF16V8CZ-15XC can bridge older peripheral arrangements into a modern embedded control system by decoding command signals, generating enables, and coordinating data handshakes. Its 8 macrocells provide enough resources for address decode, latch control, interrupt request generation, and protocol timing in a single 20-pin TSSOP. The 12 ns pin-to-pin delay is appropriate for many non-high-speed peripheral interfaces, and the electrically erasable configuration allows logic changes without changing the PCB when requirements evolve.
अनुशंसित
Test and Measurement Instrumentation
The ATF16V8CZ-15XC can implement instrument control front ends, status decoding, trigger routing, and programmable test sequences in a compact logic package. Eight macrocells and eight product terms per output are useful for combining mode controls, range selection, measurement gating, and front-panel status logic. Its CMOS/TTL-compatible interfaces simplify connection to older test equipment, while the 5 V supply supports integration into established instrument architectures. Programming flexibility helps adapt the same board to different measurement sequences.
अनुशंसित
Protocol and Timing Controller
ATF16V8CZ-15XC is suitable for small protocol adapters and timing controllers where compact programmable logic is more practical than a microcontroller. The device can generate handshake sequences, qualify asynchronous signals, implement command decoders, and coordinate bidirectional data transfers. Its 12 ns maximum pin-to-pin delay provides timing margin for low-to-moderate-speed control buses, while the 8 macrocells allow several related functions to share one package. Electrical erasability enables quick revision of protocol behavior during development.
अनुशंसित
Embedded System Glue Logic
The ATF16V8CZ-15XC can absorb board-level glue logic around processors, memory, and peripheral devices. Typical functions include chip-select generation, reset combination, interrupt qualification, bus arbitration, and power-state decoding. Consolidating these functions into one programmable device reduces the number of discrete logic packages and provides a straightforward way to implement protocol-specific timing. The 20-pin TSSOP footprint is convenient for compact boards, and 5 V CMOS/TTL-compatible interfaces align with many established embedded platforms.
अनुशंसित
Automotive and Transportation Logic
ATF16V8CZ-15XC can support legacy auxiliary-control functions in transportation electronics where a compact 5 V programmable-logic solution is required. It may be used for status decoding, lamp or relay sequencing, interface qualification, and control of discrete inputs and outputs. The 12 ns timing and CMOS/TTL-compatible I/O are suitable for many low-speed control tasks. For an actual vehicle or safety-related deployment, verify the exact temperature grade, quality status, environmental qualification, and functional-safety requirements with Microchip.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा ATF16V8CZ-15XC — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | ATF16V8CZ-15XU | ATF16V8CZ-15SC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Device Architecture | 16V8 programmable logic device with 8 macrocells | 16V8 programmable logic device with 8 macrocells | 16V8 programmable logic device with 8 macrocells |
| Logic Capacity | 250 gates | 250 gates | 250 gates |
| Maximum Pin-to-Pin Delay | 12 ns | 15 ns speed designation | 15 ns speed designation |
| Supply Voltage | 5 V | 5 V family specification | 5 V family specification |
| Input Count | Up to 16 inputs | Up to 16 inputs | Up to 16 inputs |
| I/O Count | 8 I/O pins | 8 I/O pins | 8 I/O pins |
मुख्य विशेषताएँ
- Compact reprogrammable logic integration (बनामATF16V8CZ-15XU)
- 12 ns maximum pin-to-pin delay (बनामATF16V8CZ-15SC)
- 5 V CMOS and TTL interface support (बनामATF16V8CZ-15XU)
डिज़ाइन नोट्स
Do not assume that every ATF16V8CZ ordering code is a drop-in replacement. Confirm the 20-TSSOP pinout, speed designation, temperature grade, and programming architecture in the manufacturer datasheet. The ATF16V8CZ-15XU and ATF16V8CZ-15SC are same-family candidates, but suffix-specific qualification and operating conditions must be checked before production substitution.
Assign signal pins only from the ATF16V8C package drawing and pin-description table. Keep the 20-pin TSSOP footprint and programming-related connections consistent with the original design, and route sensitive clock or control traces away from nearby switching nodes. Because the individual pin list is not published on the product landing page, the manufacturer datasheet is the controlling layout reference.
Use the 12 ns maximum pin-to-pin delay as an initial timing constraint, then calculate setup, hold, clock, and propagation margins from the exact AC tables. Add termination or buffering when driving long TTL-compatible lines, and use a controlled ground return path for high-speed transitions. Validate the assembled design across the intended supply and temperature range rather than relying only on nominal logic timing.
अनुपालन जानकारी
The Microchip product information identifies a green package but does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status for this ordering code.