ATF16V8CZ-15XC - 250-Gate 15ns EEPLD | Microchip
料号: ATF16V8CZ-15XC ✓ 量产中ATF16V8CZ-15XC 概述
An EEPLD is a user-programmable logic device that stores its configuration in electrically erasable memory. Compared with a mask-programmed PAL or GAL, the ATF16V8CZ-15XC can be programmed or reprogrammed during design, prototyping, and production. Its macrocell architecture supports logic functions that would otherwise require multiple conventional gate packages, helping reduce board area and simplify inventory management.
Key characteristics include a 12 ns maximum pin-to-pin delay, low-power 25 uA standby current, CMOS and TTL-compatible inputs and outputs, and support for zero-power operation according to the Microchip product family description. The device can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, providing a practical migration path for older programmable-logic designs.
The ATF16V8C architecture uses eight outputs, with each output allocated eight product terms. Software automatically configures multiple operating modes, allowing the same device to implement register, combinatorial, and complex logic functions. This flexibility is useful when a design combines address decoding, control sequencing, latch functions, and interface adaptation in a small embedded system.
Typical applications include industrial control logic, legacy peripheral adaptation, instrumentation, test-equipment interfaces, embedded system control, and small protocol or timing controllers. The 20-pin TSSOP package is easy to place on conventional PCB layouts, while the 5 V supply and CMOS/TTL-compatible interfaces simplify integration with established digital systems.
When designing around this device, verify the exact pin assignments, programming architecture, and supported logic functions in the manufacturer datasheet before routing a replacement PCB. Use the device only when its macrocell resources and timing are sufficient; pin compatibility alone does not guarantee that an alternative can reproduce the original fuse map or programmed output behavior. This page combines the manufacturer family specifications, package information, practical applications, and the available substitution context for faster engineering review.
直接替换替代料: ATF16V8CZ-15XC ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: ATF16V8CZ-15XC (相同外形与封装尺寸) ——差异在于 Device Type, Package, Standby Current, Maximum Pin-to-Pin Delay, Supply Voltage.
ATF16V8CZ-15XU
✅ 直接替换📋 参考替代料(不在目录中)
ATF16V8CZ-15SC
✅ 直接替换联系询价
查看数据手册 →ATF16V8CZ-15XC 最大额定值与电气特性
| Device Type | High-performance electrically erasable programmable logic device |
| Architecture | 250-gate EEPLD |
| Macrocells | 8 |
| Inputs | Up to 16 |
| I/O Pins | 8 |
| 电源电压 | 5 V |
| Maximum Pin-to-Pin Delay | 12 ns |
| Standby Current | 25 uA |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Configuration Technology | Electrically erasable programmable logic |
| 封装 | 20-pin TSSOP |
| Logic Emulation | Many 20-pin PALs and most 20-pin combinatorial PLDs |
| Operating Modes | Three software-configured modes of operation |
| Output Product Terms | 8 product terms per output |
| Zero-Power Support | Zero-power Vcc operation |
| Green Package | Green package |
| Programming | Low-cost easy-to-use software tools |
ATF16V8CZ-15XC green package 引脚配置指南
ATF16V8CZ-15XC(green package 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: ATF16V8CZ-15XC.
请参阅 数据手册 以查看完整引脚配置。
典型应用
ATF16V8CZ-15XC 适用于 6 应用s: Industrial Control and Sequencing, Legacy Peripheral Interface, Test and Measurement Instrumentation, Protocol and Timing Controller, Embedded System Glue Logic, Automotive and Transportation Logic.
Industrial Control and Sequencing
The ATF16V8CZ-15XC is useful for compact industrial control blocks that require a 5 V interface, programmable combinational logic, and deterministic timing. Its 8 macrocells can implement control sequencing, state decoding, interlock logic, and output timing without a large collection of fixed gate packages. The 12 ns maximum pin-to-pin delay supports short control paths, while CMOS and TTL-compatible I/O allows connection to established 5 V industrial logic. The electrically erasable architecture also permits design iterations during equipment development.
推荐
Legacy Peripheral Interface
ATF16V8CZ-15XC can bridge older peripheral arrangements into a modern embedded control system by decoding command signals, generating enables, and coordinating data handshakes. Its 8 macrocells provide enough resources for address decode, latch control, interrupt request generation, and protocol timing in a single 20-pin TSSOP. The 12 ns pin-to-pin delay is appropriate for many non-high-speed peripheral interfaces, and the electrically erasable configuration allows logic changes without changing the PCB when requirements evolve.
推荐
Test and Measurement Instrumentation
The ATF16V8CZ-15XC can implement instrument control front ends, status decoding, trigger routing, and programmable test sequences in a compact logic package. Eight macrocells and eight product terms per output are useful for combining mode controls, range selection, measurement gating, and front-panel status logic. Its CMOS/TTL-compatible interfaces simplify connection to older test equipment, while the 5 V supply supports integration into established instrument architectures. Programming flexibility helps adapt the same board to different measurement sequences.
推荐
Protocol and Timing Controller
ATF16V8CZ-15XC is suitable for small protocol adapters and timing controllers where compact programmable logic is more practical than a microcontroller. The device can generate handshake sequences, qualify asynchronous signals, implement command decoders, and coordinate bidirectional data transfers. Its 12 ns maximum pin-to-pin delay provides timing margin for low-to-moderate-speed control buses, while the 8 macrocells allow several related functions to share one package. Electrical erasability enables quick revision of protocol behavior during development.
推荐
Embedded System Glue Logic
The ATF16V8CZ-15XC can absorb board-level glue logic around processors, memory, and peripheral devices. Typical functions include chip-select generation, reset combination, interrupt qualification, bus arbitration, and power-state decoding. Consolidating these functions into one programmable device reduces the number of discrete logic packages and provides a straightforward way to implement protocol-specific timing. The 20-pin TSSOP footprint is convenient for compact boards, and 5 V CMOS/TTL-compatible interfaces align with many established embedded platforms.
推荐
Automotive and Transportation Logic
ATF16V8CZ-15XC can support legacy auxiliary-control functions in transportation electronics where a compact 5 V programmable-logic solution is required. It may be used for status decoding, lamp or relay sequencing, interface qualification, and control of discrete inputs and outputs. The 12 ns timing and CMOS/TTL-compatible I/O are suitable for many low-speed control tasks. For an actual vehicle or safety-related deployment, verify the exact temperature grade, quality status, environmental qualification, and functional-safety requirements with Microchip.
推荐
推荐产品汇总
工程参考数据: ATF16V8CZ-15XC ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | ATF16V8CZ-15XU | ATF16V8CZ-15SC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Device Architecture | 16V8 programmable logic device with 8 macrocells | 16V8 programmable logic device with 8 macrocells | 16V8 programmable logic device with 8 macrocells |
| Logic Capacity | 250 gates | 250 gates | 250 gates |
| Maximum Pin-to-Pin Delay | 12 ns | 15 ns speed designation | 15 ns speed designation |
| Supply Voltage | 5 V | 5 V family specification | 5 V family specification |
| Input Count | Up to 16 inputs | Up to 16 inputs | Up to 16 inputs |
| I/O Count | 8 I/O pins | 8 I/O pins | 8 I/O pins |
关键差异点
- Compact reprogrammable logic integration (对比 ATF16V8CZ-15XU)
- 12 ns maximum pin-to-pin delay (对比 ATF16V8CZ-15SC)
- 5 V CMOS and TTL interface support (对比 ATF16V8CZ-15XU)
设计说明
Do not assume that every ATF16V8CZ ordering code is a drop-in replacement. Confirm the 20-TSSOP pinout, speed designation, temperature grade, and programming architecture in the manufacturer datasheet. The ATF16V8CZ-15XU and ATF16V8CZ-15SC are same-family candidates, but suffix-specific qualification and operating conditions must be checked before production substitution.
Assign signal pins only from the ATF16V8C package drawing and pin-description table. Keep the 20-pin TSSOP footprint and programming-related connections consistent with the original design, and route sensitive clock or control traces away from nearby switching nodes. Because the individual pin list is not published on the product landing page, the manufacturer datasheet is the controlling layout reference.
Use the 12 ns maximum pin-to-pin delay as an initial timing constraint, then calculate setup, hold, clock, and propagation margins from the exact AC tables. Add termination or buffering when driving long TTL-compatible lines, and use a controlled ground return path for high-speed transitions. Validate the assembled design across the intended supply and temperature range rather than relying only on nominal logic timing.
合规信息
The Microchip product information identifies a green package but does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status for this ordering code.