ATF16V8CZ-15XC - 250-Gate 15ns EEPLD | Microchip
部品番号: ATF16V8CZ-15XC ✓ 生産中ATF16V8CZ-15XC 概要
An EEPLD is a user-programmable logic device that stores its configuration in electrically erasable memory. Compared with a mask-programmed PAL or GAL, the ATF16V8CZ-15XC can be programmed or reprogrammed during design, prototyping, and production. Its macrocell architecture supports logic functions that would otherwise require multiple conventional gate packages, helping reduce board area and simplify inventory management.
Key characteristics include a 12 ns maximum pin-to-pin delay, low-power 25 uA standby current, CMOS and TTL-compatible inputs and outputs, and support for zero-power operation according to the Microchip product family description. The device can emulate many 20-pin PAL devices and most 20-pin combinatorial PLDs, providing a practical migration path for older programmable-logic designs.
The ATF16V8C architecture uses eight outputs, with each output allocated eight product terms. Software automatically configures multiple operating modes, allowing the same device to implement register, combinatorial, and complex logic functions. This flexibility is useful when a design combines address decoding, control sequencing, latch functions, and interface adaptation in a small embedded system.
Typical applications include industrial control logic, legacy peripheral adaptation, instrumentation, test-equipment interfaces, embedded system control, and small protocol or timing controllers. The 20-pin TSSOP package is easy to place on conventional PCB layouts, while the 5 V supply and CMOS/TTL-compatible interfaces simplify integration with established digital systems.
When designing around this device, verify the exact pin assignments, programming architecture, and supported logic functions in the manufacturer datasheet before routing a replacement PCB. Use the device only when its macrocell resources and timing are sufficient; pin compatibility alone does not guarantee that an alternative can reproduce the original fuse map or programmed output behavior. This page combines the manufacturer family specifications, package information, practical applications, and the available substitution context for faster engineering review.
ドロップイン代替品: ATF16V8CZ-15XC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: ATF16V8CZ-15XC (同一形状・フットプリント) — 相違点: Device Type, Package, Standby Current, Maximum Pin-to-Pin Delay, Supply Voltage.
ATF16V8CZ-15XU
✅ ドロップイン📋 参考代替品(カタログ未掲載)
ATF16V8CZ-15SC
✅ ドロップイン価格はお問い合わせください
データシートを見る →ATF16V8CZ-15XC 最大定格&電気的特性
| Device Type | High-performance electrically erasable programmable logic device |
| Architecture | 250-gate EEPLD |
| Macrocells | 8 |
| Inputs | Up to 16 |
| I/O Pins | 8 |
| 電源電圧 | 5 V |
| Maximum Pin-to-Pin Delay | 12 ns |
| Standby Current | 25 uA |
| Input Compatibility | CMOS and TTL compatible |
| Output Compatibility | CMOS and TTL compatible |
| Configuration Technology | Electrically erasable programmable logic |
| パッケージ | 20-pin TSSOP |
| Logic Emulation | Many 20-pin PALs and most 20-pin combinatorial PLDs |
| Operating Modes | Three software-configured modes of operation |
| Output Product Terms | 8 product terms per output |
| Zero-Power Support | Zero-power Vcc operation |
| Green Package | Green package |
| Programming | Low-cost easy-to-use software tools |
ATF16V8CZ-15XC green package ピン配置ガイド
ATF16V8CZ-15XC (green package パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: ATF16V8CZ-15XC.
詳細は データシート をご参照ください。
主な用途
ATF16V8CZ-15XC の用途: 6 件s: Industrial Control and Sequencing, Legacy Peripheral Interface, Test and Measurement Instrumentation, Protocol and Timing Controller, Embedded System Glue Logic, Automotive and Transportation Logic.
Industrial Control and Sequencing
The ATF16V8CZ-15XC is useful for compact industrial control blocks that require a 5 V interface, programmable combinational logic, and deterministic timing. Its 8 macrocells can implement control sequencing, state decoding, interlock logic, and output timing without a large collection of fixed gate packages. The 12 ns maximum pin-to-pin delay supports short control paths, while CMOS and TTL-compatible I/O allows connection to established 5 V industrial logic. The electrically erasable architecture also permits design iterations during equipment development.
おすすめ
Legacy Peripheral Interface
ATF16V8CZ-15XC can bridge older peripheral arrangements into a modern embedded control system by decoding command signals, generating enables, and coordinating data handshakes. Its 8 macrocells provide enough resources for address decode, latch control, interrupt request generation, and protocol timing in a single 20-pin TSSOP. The 12 ns pin-to-pin delay is appropriate for many non-high-speed peripheral interfaces, and the electrically erasable configuration allows logic changes without changing the PCB when requirements evolve.
おすすめ
Test and Measurement Instrumentation
The ATF16V8CZ-15XC can implement instrument control front ends, status decoding, trigger routing, and programmable test sequences in a compact logic package. Eight macrocells and eight product terms per output are useful for combining mode controls, range selection, measurement gating, and front-panel status logic. Its CMOS/TTL-compatible interfaces simplify connection to older test equipment, while the 5 V supply supports integration into established instrument architectures. Programming flexibility helps adapt the same board to different measurement sequences.
おすすめ
Protocol and Timing Controller
ATF16V8CZ-15XC is suitable for small protocol adapters and timing controllers where compact programmable logic is more practical than a microcontroller. The device can generate handshake sequences, qualify asynchronous signals, implement command decoders, and coordinate bidirectional data transfers. Its 12 ns maximum pin-to-pin delay provides timing margin for low-to-moderate-speed control buses, while the 8 macrocells allow several related functions to share one package. Electrical erasability enables quick revision of protocol behavior during development.
おすすめ
Embedded System Glue Logic
The ATF16V8CZ-15XC can absorb board-level glue logic around processors, memory, and peripheral devices. Typical functions include chip-select generation, reset combination, interrupt qualification, bus arbitration, and power-state decoding. Consolidating these functions into one programmable device reduces the number of discrete logic packages and provides a straightforward way to implement protocol-specific timing. The 20-pin TSSOP footprint is convenient for compact boards, and 5 V CMOS/TTL-compatible interfaces align with many established embedded platforms.
おすすめ
Automotive and Transportation Logic
ATF16V8CZ-15XC can support legacy auxiliary-control functions in transportation electronics where a compact 5 V programmable-logic solution is required. It may be used for status decoding, lamp or relay sequencing, interface qualification, and control of discrete inputs and outputs. The 12 ns timing and CMOS/TTL-compatible I/O are suitable for many low-speed control tasks. For an actual vehicle or safety-related deployment, verify the exact temperature grade, quality status, environmental qualification, and functional-safety requirements with Microchip.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ATF16V8CZ-15XC — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ATF16V8CZ-15XU | ATF16V8CZ-15SC |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-TSSOP | 20-TSSOP | 20-TSSOP |
| Device Architecture | 16V8 programmable logic device with 8 macrocells | 16V8 programmable logic device with 8 macrocells | 16V8 programmable logic device with 8 macrocells |
| Logic Capacity | 250 gates | 250 gates | 250 gates |
| Maximum Pin-to-Pin Delay | 12 ns | 15 ns speed designation | 15 ns speed designation |
| Supply Voltage | 5 V | 5 V family specification | 5 V family specification |
| Input Count | Up to 16 inputs | Up to 16 inputs | Up to 16 inputs |
| I/O Count | 8 I/O pins | 8 I/O pins | 8 I/O pins |
主な差別化要因
- Compact reprogrammable logic integration (vs ATF16V8CZ-15XU)
- 12 ns maximum pin-to-pin delay (vs ATF16V8CZ-15SC)
- 5 V CMOS and TTL interface support (vs ATF16V8CZ-15XU)
設計ノート
Do not assume that every ATF16V8CZ ordering code is a drop-in replacement. Confirm the 20-TSSOP pinout, speed designation, temperature grade, and programming architecture in the manufacturer datasheet. The ATF16V8CZ-15XU and ATF16V8CZ-15SC are same-family candidates, but suffix-specific qualification and operating conditions must be checked before production substitution.
Assign signal pins only from the ATF16V8C package drawing and pin-description table. Keep the 20-pin TSSOP footprint and programming-related connections consistent with the original design, and route sensitive clock or control traces away from nearby switching nodes. Because the individual pin list is not published on the product landing page, the manufacturer datasheet is the controlling layout reference.
Use the 12 ns maximum pin-to-pin delay as an initial timing constraint, then calculate setup, hold, clock, and propagation margins from the exact AC tables. Add termination or buffering when driving long TTL-compatible lines, and use a controlled ground return path for high-speed transitions. Validate the assembled design across the intended supply and temperature range rather than relying only on nominal logic timing.
コンプライアンス情報
The Microchip product information identifies a green package but does not explicitly state RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status for this ordering code.