Microchip Technology

ATF22LV10CQZ-30JI - 30ns CMOS PLD, 28-PLCC | Microchip

MPN: ATF22LV10CQZ-30JI ✓ सक्रिय
3.0 V to 5.5 V Vdss 3 uA typical Id 28-pin PLCC Package 25 ns Speed Electrically erasable flash memory Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ATF22LV10CQZ-30JI अवलोकन

The Microchip Technology ATF22LV10CQZ-30JI is a 500-gate electrically erasable flash programmable logic device with 10 macrocells, a 30 ns maximum delay, and a 28-pin PLCC package measuring 11.51 mm by 11.51 mm. It operates from 3.0 V to 5.5 V and is specified for industrial-temperature operation. The ATF22LV10CQZ family also reaches 25 ns speed grades while retaining low-voltage operation across industrial and commercial temperature ranges.

A simple programmable logic device, or SPLD, is a semiconductor that implements a fixed digital logic function through user-programmed configuration memory. The ATF22LV10CQZ belongs to the broader hierarchy of programmable logic device, complex programmable logic device, and field-programmable logic array products. Its 10-macrocell architecture consolidates multiple sum-of-products logic functions into a compact device, reducing the need for separate gate-logic packages in control, decoding, interface, and data-routing circuits.

Key features include electrically erasable flash configuration memory, a 30 ns propagation delay, 10 macrocells, 28 I/O pins, and operation from 3.0 V to 5.5 V. The ATF22LV10CQZ also incorporates edge-sensing Input Transition Detection technology, allowing the device to enter a low-power standby state when its inputs remain idle. The manufacturer documentation identifies typical standby current of 3 uA for the edge-sensing zero-standby-power configuration.

Internally, the ATF22LV10CQZ uses a CMOS architecture with programmable AND-array and OR-array logic structures, individual product terms, and configurable I/O behavior. Electrically erasable flash memory retains the programmed logic pattern without a separate programming voltage after configuration, while in-circuit reprogramming supports design updates, test-board optimization, and production-programming workflows. The JI suffix denotes the industrial-temperature, 28-pin PLCC ordering configuration, while the 30 suffix identifies the 30 ns speed grade.

Typical uses include industrial control logic, address decoding, bus-interface translation, display sequencing, peripheral glue logic, and legacy equipment upgrades. Because an SPLD is programmed for a specific Boolean function, the device can replace numerous fixed gates while preserving the same board footprint during a migration from another 22V10-family PLD.

When laying out a board, confirm the physical PLCC footprint, programming interface, and unused-pin treatment against the manufacturer pin-description and configuration tables. Allow the power rails to satisfy the 3.0 V to 5.5 V operating range, and evaluate timing at the selected system voltage because the published delay is a maximum device timing value rather than a guaranteed board-level settling time.

This page consolidates device specifications, verified source links, family alternatives, and practical implementation guidance. It also highlights the distinctions between speed, temperature, and package options that must be checked before treating another ATF22LV10CQZ ordering code as a drop-in replacement.

के लिए ड्रॉप-इन विकल्प ATF22LV10CQZ-30JI — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATF22LV10CQZ-30JI (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Architecture, Device Type, Logic Family, Package, Power-Down Feature.

Microchip Technology
Architecture: 10-macrocell CMOS SPLD
Device Type: Simple programmable logic device (SPLD)
Logic Family: ATF22LV10CQZ
इसके साथ तुलना करें ATF22LV10CQZ-30JI →
Microchip Technology
Architecture: 22V10 SPLD
Device Type: High-performance CMOS electrically erasable programmable logic device
Logic Family: CMOS
इसके साथ तुलना करें ATF22LV10CQZ-30JI →

ATF22LV10CQZ-30JU

✅ ड्रॉप-इन
Microchip Technology
📦 28-PLCC (11.51x11.51 mm)
High-performance CMOS electrically erasable programmable logic device · 22V10 SPLD · 10 macrocells · 10 pins · 30 ns · 25 ns · 3.0 V to 5.5 V · CMOS

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATF22LV10CQZ-30JC

✅ ड्रॉप-इन
Microchip Technology
📦 28-PLCC (11.51x11.51 mm)
Simple programmable logic device (SPLD) · Electrically erasable flash memory · 10 macrocells · ATF22LV10CQZ · 30 ns · 25 ns · 3.0 V to 5.5 V · 3 uA typical

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATF22LV10CQZ-30XU

✅ ड्रॉप-इन
Microchip Technology
📦 28-PLCC (11.51x11.51 mm)
Electrically erasable programmable logic device (EEPLD) · Simple programmable logic device with 10 macrocells · 10 · 10 · 24 · 30 ns · Down to 25 ns · 3.0 V to 5.5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATF22LV10CQZ-30JI Maximum Ratings और Electrical Characteristics

Product Type Simple Programmable Logic Device (SPLD)
Programmable Logic Architecture 500-gate PAL-type CMOS PLD
Macrocell Count 10 macrocells
I/O Pin Count 28 I/O pins
Maximum Propagation Delay 30 ns
Family Minimum Speed 25 ns
Supply Voltage Range 3.0 V to 5.5 V
Configuration Memory Technology Electrically erasable flash memory
Edge-Sensing Standby Current 3 uA typical
Power-Down Feature Zero standby power mode with Input Transition Detection
Package Type 28-pin PLCC
Package Dimensions 11.51 mm x 11.51 mm
Temperature Grade Industrial temperature
Logic Technology CMOS
माउंटिंग प्रकार Surface mount
Programming Method In-circuit electrical flash programming
Logic Function User-programmed sum-of-products Boolean logic

ATF22LV10CQZ-30JI 11.51 mm x 11.51 mm पिन कॉन्फ़िगरेशन गाइड

ATF22LV10CQZ-30JI (11.51 mm x 11.51 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATF22LV10CQZ-30JI के लिए 11.51 mm x 11.51 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATF22LV10CQZ-30JI.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATF22LV10CQZ-30JI के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control Logic, Bus Address Decoding, Interface and Signal Conditioning, Display and Panel Sequencing, Legacy Equipment Upgrade, Low-Power Standby Control.

🏭

Industrial Control Logic

The ATF22LV10CQZ-30JI is appropriate for consolidating control equations, interlocks, and state-machine decode logic in industrial equipment. Its 10 macrocells provide enough capacity for multiple sum-of-products functions, while the 30 ns maximum delay is suitable for many machine-control signals operating from 3.0 V to 5.5 V. Electrically erasable flash configuration allows logic revisions without replacing the device or changing the board layout. Verify every output path against the worst-case timing budget and specify the correct temperature-grade suffix for the deployment environment.

🖥️

Bus Address Decoding

The ATF22LV10CQZ-30JI can implement address decode, chip-select generation, and bus-cycle qualification in a compact legacy control system. Ten macrocells and 28 I/O pins allow several decode equations to share one package, reducing the component count compared with discrete gate logic. Its 30 ns propagation-delay grade should be checked against the required address setup and hold windows, while the 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. Preserve the original programmed macrocell function or reconfigure and validate the logic when replacing an installed PLD.

🔧

Interface and Signal Conditioning

Use the ATF22LV10CQZ-30JI for glue logic that combines latch enables, request acknowledgments, interrupt masking, and peripheral-select functions. The 28 I/O pins permit direct implementation of the Boolean relationships surrounding a microprocessor or DSP, and the electrically erasable flash array supports board-level design iterations. The 30 ns maximum delay is relevant when the conditioned signal must meet a downstream setup time, so include output loading and external interconnect delay in the timing analysis. The device is especially useful when modifying a mature design without expanding the board footprint.

📺

Display and Panel Sequencing

The ATF22LV10CQZ-30JI is useful for sequencing multiplexed display lines, generating strobe signals, and decoding keypad or panel states. Its compact PLCC package and low-voltage operation fit equipment that uses a 3.3 V or 5 V control rail, while the 30 ns speed supports common multiplexed panel timing. A programmer can implement the required combinational and registered functions in the flash configuration memory and update them when the panel interface changes. Confirm display-driver voltage levels separately, because the PLD supply specification does not determine the logic voltage tolerated by the display module.

🔧

Legacy Equipment Upgrade

The ATF22LV10CQZ-30JI is a practical choice for maintaining or modernizing equipment that already uses a 22V10-family PLD footprint. The documented ATF22LV10CQZ-30JU and ATF22LV10CQZ-30JC share the 28-pin PLCC package, 10-macrocell architecture, and 30 ns speed grade, allowing a controlled substitution after temperature and sourcing requirements are reviewed. Electrically erasable flash configuration simplifies firmware-like updates to the Boolean logic. Before replacement, verify the exact pin functions, power-up behavior, programming fixture, and system timing rather than assuming every PLD with the same package is interchangeable.

🔋

Low-Power Standby Control

The ATF22LV10CQZ-30JI is suitable for portable or intermittently powered instruments that need logic to remain available without continuous switching activity. Edge-sensing Input Transition Detection allows the device to enter a zero standby-power mode when inputs remain idle, and the manufacturer datasheet identifies 3 uA typical standby current for the edge-sensing configuration. The 3.0 V to 5.5 V supply range permits operation from common single-cell-derived or 5 V rails. Measure the complete system current because configured logic activity and external pull networks can dominate consumption even when the PLD enters its standby state.

What is the ATF22LV10CQZ-30JI?
The ATF22LV10CQZ-30JI is a Microchip Technology 500-gate simple programmable logic device with 10 macrocells, a 30 ns maximum propagation delay, and electrically erasable flash configuration memory. According to the manufacturer datasheet, it operates from 3.0 V to 5.5 V and is packaged in a 28-pin PLCC measuring 11.51 mm by 11.51 mm. The device is intended for compact implementations of user-programmed Boolean logic.
What is the operating voltage of ATF22LV10CQZ-30JI?
The ATF22LV10CQZ-30JI operates from 3.0 V to 5.5 V. The manufacturer product page states that all ATF22LV10CQZ speed ranges are specified over this voltage interval for industrial and commercial temperature grades. A board design should maintain the supply within this range during normal operation and during programming. Its flash-based configuration memory allows the programmed logic to be retained without a separate supply after configuration.
Where can I download the ATF22LV10CQZ-30JI datasheet PDF?
The ATF22LV10CQZ-30JI datasheet PDF is available from the Microchip Technology document link listed on this page. The manufacturer document is titled the ATF22LV10C Complete Datasheet and covers the ATF22LV10C device family, including the ATF22LV10CQZ low-voltage variant. It should be used to confirm the pin description, timing values, electrical characteristics, configuration procedure, and package drawings for the exact ordering code.
Where can I find the ATF22LV10CQZ-30JI pinout?
The authoritative ATF22LV10CQZ-30JI pinout is found in the pin-description table and package drawing in the manufacturer datasheet. The device has 28 pins in a PLCC package, but individual pin names, programming pins, clock-related pins, and reserved positions must be taken directly from that table rather than inferred from a generic PLD diagram. Use the same document when assigning PCB tracks and planning the in-circuit programming connection.
What can replace the ATF22LV10CQZ-30JI?
The closest documented same-package replacements are the ATF22LV10CQZ-30JU and ATF22LV10CQZ-30JC, both of which use the 28-pin PLCC configuration. Their temperature grades and commercial sourcing differ, so the JI suffix must not be ignored during substitution. For a legacy or exact-fit requirement, compare the manufacturer ordering information, operating-temperature requirements, timing grade, and availability before accepting either alternative.
Is ATF22LV10CQZ-30JU the same as ATF22LV10CQZ-30JI?
The ATF22LV10CQZ-30JU is mechanically and parametrically very close to the ATF22LV10CQZ-30JI because both are 30 ns, 10-macrocell devices in a 28-pin PLCC package. The ordering suffixes indicate different temperature-grade or sourcing configurations, so they are not automatically interchangeable in every qualification program. The ATF22LV10CQZ-30JI is identified as an industrial-temperature part, while the 30JU requires comparison against its own ordering information.
What is the difference between ATF22LV10CQZ-30JI and ATF22LV10CQZ-30JC?
Both devices are documented as 10-macrocell, 30 ns PLDs in a 28-pin PLCC package. Their ordering suffixes distinguish temperature-grade and sourcing conditions rather than the fundamental macrocell count or package architecture. The ATF22LV10CQZ-30JI is identified as industrial temperature, while the ATF22LV10CQZ-30JC is a distinct commercial-ordering option. Confirm the exact suffix requirements before treating the JC variant as a drop-in choice.
When should I choose the ATF22LV10CQZ-30JI over a faster ATF22LV10CQZ speed grade?
Choose the ATF22LV10CQZ-30JI when a 30 ns maximum propagation delay satisfies the design while an industrial-temperature ordering configuration is required. The ATF22LV10CQZ family supports speeds down to 25 ns, but a faster grade is useful only when external logic timing actually requires it. Evaluate the complete path, including register and interconnect delays, instead of selecting solely by the advertised propagation-delay number.
Is ATF22LV10CQZ-30JI suitable for low-power industrial equipment?
The ATF22LV10CQZ-30JI is suitable for low-power industrial logic when its 3.0 V to 5.5 V supply range and standby behavior match the design. The manufacturer datasheet identifies edge-sensing Input Transition Detection and a typical standby current of 3 uA for the zero-standby-power configuration. Actual system consumption also depends on the configured logic, switching activity, pull networks, and how the device is disabled.
How is the ATF22LV10CQZ-30JI programmed?
The ATF22LV10CQZ-30JI is configured through electrically erasable flash memory. According to the manufacturer documentation, it is a high-performance electrically erasable programmable logic device, and its published operating ranges cover 3.0 V to 5.5 V. The configuration sequence, programming pins, and activation procedure must follow the device-specific programming section in the datasheet before the logic is placed in a finished circuit.
What is the best Lattice equivalent for the ATF22LV10CQZ-30JI?
The ATF22LV10CQZ-30JI has no verified Lattice or other cross-brand drop-in equivalent in the available cross-reference results. The documented substitutions are other ATF22LV10CQZ ordering codes from Microchip Technology and legacy Atmel-family products with different architecture or package details. For a cross-brand migration, use a device with the same PLCC footprint, compatible supply voltage, equivalent macrocell resources, and an explicitly documented pin-compatible programming interface.
What are the key specifications engineers should know about ATF22LV10CQZ-30JI?
The essential ATF22LV10CQZ-30JI specifications are 10 macrocells, 28 I/O pins, a 30 ns maximum propagation delay, a 3.0 V to 5.5 V supply range, and a 28-pin PLCC package. It also uses electrically erasable flash configuration memory and provides edge-sensing Input Transition Detection with a typical standby current of 3 uA. These parameters define its position among compact, low-voltage, reprogrammable logic devices.
Where can I buy ATF22LV10CQZ-30JI online?
Use the Request a Quote form on this page to request ATF22LV10CQZ-30JI availability, current lead time, and a quotation. The manufacturer product page and distributor listings linked in the source section document market availability, while the Request a Quote workflow provides the appropriate commercial response for this exact ordering code. Include the required package, quantity, and traceability requirements with the request.
What is the lead time for ATF22LV10CQZ-30JI?
The current lead time for ATF22LV10CQZ-30JI should be requested through the Request a Quote form on this page. Lead time can vary with the order quantity, programmed configuration, packaging requirement, and manufacturing status. The manufacturer product page confirms that the ATF22LV10CQZ is a current family offering, but a specific scheduled delivery commitment must be established during quotation.
Is ATF22LV10CQZ-30JI in stock?
Stock status for ATF22LV10CQZ-30JI changes with order volume and procurement timing. Submit the exact MPN through the Request a Quote form on this page to obtain a current availability and allocation response. Do not infer live inventory from a catalog page, and state the required quantity, date code expectations, and whether programmed parts are needed so the quotation reflects the complete requirement.

के लिए इंजीनियरिंग संदर्भ डेटा ATF22LV10CQZ-30JI — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ATF22LV10CQZ-30JI for a 3.0 V to 5.5 V industrial design that requires 10 macrocells, 28 I/O pins, a 30 ns maximum delay, and electrically erasable flash configuration in a 28-pin PLCC package. Select the ATF22LV10CQZ-30JU when the same electrical and mechanical configuration is acceptable but the JU temperature or sourcing classification meets the deployment requirement. The ATF22LV10CQZ-30JC is relevant when a commercial ordering condition is acceptable for the intended equipment. The ATF22LV10CQZ-30XU belongs to the same speed and package family but requires its exact ordering definition to be checked. In every case, verify the pin-description table, power-up behavior, programming fixture, timing, temperature range, and system power budget. A PLD is normally selected for compact reprogrammable glue logic, not as a general substitute for a microcontroller or CPLD with substantially more registers, interconnect, and logic capacity.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATF22LV10CQZ-30JU ATF22LV10CQZ-30JC ATF22LV10CQZ-30XU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-PLCC (11.51x11.51 mm) 28-PLCC (11.51x11.51 mm) 28-PLCC (11.51x11.51 mm) 28-PLCC (11.51x11.51 mm)
Macrocell Count 10 macrocells 10 macrocells 10 macrocells 10 macrocells
Propagation Delay 30 ns 30 ns 30 ns 30 ns
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Configuration Memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory Electrically erasable flash memory
I/O Pin Count 28 I/O pins 28 I/O pins 28 I/O pins 28 I/O pins
Low-Power Feature Edge-sensing zero standby power with Input Transition Detection Edge-sensing zero standby power with Input Transition Detection Edge-sensing zero standby power with Input Transition Detection Edge-sensing zero standby power with Input Transition Detection
Ordering Temperature Configuration Industrial, JI suffix JU suffix; verify manufacturer ordering table JC suffix; commercial configuration XU suffix; verify manufacturer ordering table

मुख्य विशेषताएँ

  • Industrial-temperature ATF22LV10CQZ configuration with 30 ns timing (बनामATF22LV10CQZ-30JC)
  • Single-package consolidation of compact Boolean control functions (बनामATF22LV10CQZ-30JU)
  • Edge-sensing low-power behavior at a 3.0 V minimum supply (बनामATF22LV10CQZ-30XU)

डिज़ाइन नोट्स

Do not treat every 28-pin ATF22LV10CQZ ordering code as automatically acceptable for an industrial replacement. Confirm the suffix definition, temperature grade, active-device status, and programming sequence in the manufacturer ordering table. The JI, JU, JC, and XU codes retain the same broad device description in distributor listings, but qualification requirements can differ. A drop-in mechanical decision must be followed by an electrical, timing, and temperature review.

Base timing decisions on the published 30 ns maximum propagation delay together with external loading, interconnect delay, and the receiving device's setup and hold requirements. The 30 ns figure is a device maximum, not a promise that every configured path completes in exactly 30 ns. Analyze the slowest implemented product-term path, especially for address decode and control signals that fan out to multiple loads.

Follow the manufacturer PLCC land pattern and pin-1 orientation rather than relying on a generic 28-pin footprint drawing. Keep the programming interface accessible in the fixture, provide a stable supply referenced to the device ground, and review unused pins according to the datasheet's recommended configuration. Confirm the 11.51 mm by 11.51 mm body dimensions against the assembled PCB and mechanical clearance around the leaded package.

Design the 3.0 V to 5.5 V supply tolerance around the device's operating limits and place local bypass capacitance close to the package power pins. When the edge-sensing standby function is used, confirm that external pull networks do not defeat the intended low-power state. Account for configuration activity and I/O leakage when comparing the complete controller power budget.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The ATF22LV10CQZ-30JI is a programmable logic semiconductor and is not presented as an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation against the manufacturer's current material-declaration or product-compliance documentation.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ATF22LV10CQZ-30JI ATF22LV10CQZ-30JI datasheet ATF22LV10CQZ-30JI datasheet pdf ATF22LV10CQZ-30JI pinout ATF22LV10CQZ-30JI equivalent ATF22LV10CQZ-30JI replacement ATF22LV10CQZ-30JI cross reference ATF22LV10CQZ-30JI footprint ATF22LV10CQZ-30JI 28 PLCC ATF22LV10CQZ-30JI price ATF22LV10CQZ-30JI stock Microchip ATF22LV10CQZ-30JI ATF22LV10CQZ-30JU vs ATF22LV10CQZ-30JI ATF22LV10CQZ 3.0V 5.5V PLD

संबंधित कंपोनेंट्स और शब्द

Microchip Technology Atmel ATF22LV10CQZ-30JI ATF22LV10CQZ-30JU ATF22LV10CQZ-30JC ATF22LV10CQZ-30XU simple programmable logic device SPLD field-programmable logic array FPGA electrically erasable flash memory CMOS 10 macrocells 28-pin PLCC Input Transition Detection zero standby power sum-of-products logic 3.0 V to 5.5 V 30 ns propagation delay industrial temperature grade in-circuit programming Microchip Technology ATF22LV10CQZ ATF22LV10C ATF22LV10CZ
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें