ATF22LV10CQZ-30JI - 30ns CMOS PLD, 28-PLCC | Microchip
MPN: ATF22LV10CQZ-30JI ✓ 啟用中ATF22LV10CQZ-30JI 概覽
A simple programmable logic device, or SPLD, is a semiconductor that implements a fixed digital logic function through user-programmed configuration memory. The ATF22LV10CQZ belongs to the broader hierarchy of programmable logic device, complex programmable logic device, and field-programmable logic array products. Its 10-macrocell architecture consolidates multiple sum-of-products logic functions into a compact device, reducing the need for separate gate-logic packages in control, decoding, interface, and data-routing circuits.
Key features include electrically erasable flash configuration memory, a 30 ns propagation delay, 10 macrocells, 28 I/O pins, and operation from 3.0 V to 5.5 V. The ATF22LV10CQZ also incorporates edge-sensing Input Transition Detection technology, allowing the device to enter a low-power standby state when its inputs remain idle. The manufacturer documentation identifies typical standby current of 3 uA for the edge-sensing zero-standby-power configuration.
Internally, the ATF22LV10CQZ uses a CMOS architecture with programmable AND-array and OR-array logic structures, individual product terms, and configurable I/O behavior. Electrically erasable flash memory retains the programmed logic pattern without a separate programming voltage after configuration, while in-circuit reprogramming supports design updates, test-board optimization, and production-programming workflows. The JI suffix denotes the industrial-temperature, 28-pin PLCC ordering configuration, while the 30 suffix identifies the 30 ns speed grade.
Typical uses include industrial control logic, address decoding, bus-interface translation, display sequencing, peripheral glue logic, and legacy equipment upgrades. Because an SPLD is programmed for a specific Boolean function, the device can replace numerous fixed gates while preserving the same board footprint during a migration from another 22V10-family PLD.
When laying out a board, confirm the physical PLCC footprint, programming interface, and unused-pin treatment against the manufacturer pin-description and configuration tables. Allow the power rails to satisfy the 3.0 V to 5.5 V operating range, and evaluate timing at the selected system voltage because the published delay is a maximum device timing value rather than a guaranteed board-level settling time.
This page consolidates device specifications, verified source links, family alternatives, and practical implementation guidance. It also highlights the distinctions between speed, temperature, and package options that must be checked before treating another ATF22LV10CQZ ordering code as a drop-in replacement.
直接替換替代品,適用於 ATF22LV10CQZ-30JI — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATF22LV10CQZ-30JI (相同外形與佔位) — 差異在於 Architecture, Device Type, Logic Family, Package, Power-Down Feature.
ATF22LV10CQZ-30JU
✅ 直接替換聯絡詢價
查看資料表 →ATF22LV10CQZ-30JC
✅ 直接替換聯絡詢價
查看資料表 →ATF22LV10CQZ-30XU
✅ 直接替換聯絡詢價
查看資料表 →ATF22LV10CQZ-30JI 最大額定值與電氣特性
| Product Type | Simple Programmable Logic Device (SPLD) |
| Programmable Logic Architecture | 500-gate PAL-type CMOS PLD |
| Macrocell Count | 10 macrocells |
| I/O Pin Count | 28 I/O pins |
| Maximum Propagation Delay | 30 ns |
| Family Minimum Speed | 25 ns |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Configuration Memory Technology | Electrically erasable flash memory |
| Edge-Sensing Standby Current | 3 uA typical |
| Power-Down Feature | Zero standby power mode with Input Transition Detection |
| Package Type | 28-pin PLCC |
| Package Dimensions | 11.51 mm x 11.51 mm |
| Temperature Grade | Industrial temperature |
| Logic Technology | CMOS |
| 安裝類型 | Surface mount |
| Programming Method | In-circuit electrical flash programming |
| Logic Function | User-programmed sum-of-products Boolean logic |
ATF22LV10CQZ-30JI 11.51 mm x 11.51 mm 腳位配置指南
ATF22LV10CQZ-30JI(11.51 mm x 11.51 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATF22LV10CQZ-30JI.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATF22LV10CQZ-30JI 適用於 6 應用s: Industrial Control Logic, Bus Address Decoding, Interface and Signal Conditioning, Display and Panel Sequencing, Legacy Equipment Upgrade, Low-Power Standby Control.
Industrial Control Logic
The ATF22LV10CQZ-30JI is appropriate for consolidating control equations, interlocks, and state-machine decode logic in industrial equipment. Its 10 macrocells provide enough capacity for multiple sum-of-products functions, while the 30 ns maximum delay is suitable for many machine-control signals operating from 3.0 V to 5.5 V. Electrically erasable flash configuration allows logic revisions without replacing the device or changing the board layout. Verify every output path against the worst-case timing budget and specify the correct temperature-grade suffix for the deployment environment.
推薦
Bus Address Decoding
The ATF22LV10CQZ-30JI can implement address decode, chip-select generation, and bus-cycle qualification in a compact legacy control system. Ten macrocells and 28 I/O pins allow several decode equations to share one package, reducing the component count compared with discrete gate logic. Its 30 ns propagation-delay grade should be checked against the required address setup and hold windows, while the 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. Preserve the original programmed macrocell function or reconfigure and validate the logic when replacing an installed PLD.
推薦
Interface and Signal Conditioning
Use the ATF22LV10CQZ-30JI for glue logic that combines latch enables, request acknowledgments, interrupt masking, and peripheral-select functions. The 28 I/O pins permit direct implementation of the Boolean relationships surrounding a microprocessor or DSP, and the electrically erasable flash array supports board-level design iterations. The 30 ns maximum delay is relevant when the conditioned signal must meet a downstream setup time, so include output loading and external interconnect delay in the timing analysis. The device is especially useful when modifying a mature design without expanding the board footprint.
推薦
Display and Panel Sequencing
The ATF22LV10CQZ-30JI is useful for sequencing multiplexed display lines, generating strobe signals, and decoding keypad or panel states. Its compact PLCC package and low-voltage operation fit equipment that uses a 3.3 V or 5 V control rail, while the 30 ns speed supports common multiplexed panel timing. A programmer can implement the required combinational and registered functions in the flash configuration memory and update them when the panel interface changes. Confirm display-driver voltage levels separately, because the PLD supply specification does not determine the logic voltage tolerated by the display module.
推薦
Legacy Equipment Upgrade
The ATF22LV10CQZ-30JI is a practical choice for maintaining or modernizing equipment that already uses a 22V10-family PLD footprint. The documented ATF22LV10CQZ-30JU and ATF22LV10CQZ-30JC share the 28-pin PLCC package, 10-macrocell architecture, and 30 ns speed grade, allowing a controlled substitution after temperature and sourcing requirements are reviewed. Electrically erasable flash configuration simplifies firmware-like updates to the Boolean logic. Before replacement, verify the exact pin functions, power-up behavior, programming fixture, and system timing rather than assuming every PLD with the same package is interchangeable.
推薦
Low-Power Standby Control
The ATF22LV10CQZ-30JI is suitable for portable or intermittently powered instruments that need logic to remain available without continuous switching activity. Edge-sensing Input Transition Detection allows the device to enter a zero standby-power mode when inputs remain idle, and the manufacturer datasheet identifies 3 uA typical standby current for the edge-sensing configuration. The 3.0 V to 5.5 V supply range permits operation from common single-cell-derived or 5 V rails. Measure the complete system current because configured logic activity and external pull networks can dominate consumption even when the PLD enters its standby state.
推薦
推薦產品摘要
工程參考資料,適用於 ATF22LV10CQZ-30JI — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATF22LV10CQZ-30JU | ATF22LV10CQZ-30JC | ATF22LV10CQZ-30XU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-PLCC (11.51x11.51 mm) | 28-PLCC (11.51x11.51 mm) | 28-PLCC (11.51x11.51 mm) | 28-PLCC (11.51x11.51 mm) |
| Macrocell Count | 10 macrocells | 10 macrocells | 10 macrocells | 10 macrocells |
| Propagation Delay | 30 ns | 30 ns | 30 ns | 30 ns |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Configuration Memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory | Electrically erasable flash memory |
| I/O Pin Count | 28 I/O pins | 28 I/O pins | 28 I/O pins | 28 I/O pins |
| Low-Power Feature | Edge-sensing zero standby power with Input Transition Detection | Edge-sensing zero standby power with Input Transition Detection | Edge-sensing zero standby power with Input Transition Detection | Edge-sensing zero standby power with Input Transition Detection |
| Ordering Temperature Configuration | Industrial, JI suffix | JU suffix; verify manufacturer ordering table | JC suffix; commercial configuration | XU suffix; verify manufacturer ordering table |
主要差異化特點
- Industrial-temperature ATF22LV10CQZ configuration with 30 ns timing (對比ATF22LV10CQZ-30JC)
- Single-package consolidation of compact Boolean control functions (對比ATF22LV10CQZ-30JU)
- Edge-sensing low-power behavior at a 3.0 V minimum supply (對比ATF22LV10CQZ-30XU)
設計說明
Do not treat every 28-pin ATF22LV10CQZ ordering code as automatically acceptable for an industrial replacement. Confirm the suffix definition, temperature grade, active-device status, and programming sequence in the manufacturer ordering table. The JI, JU, JC, and XU codes retain the same broad device description in distributor listings, but qualification requirements can differ. A drop-in mechanical decision must be followed by an electrical, timing, and temperature review.
Base timing decisions on the published 30 ns maximum propagation delay together with external loading, interconnect delay, and the receiving device's setup and hold requirements. The 30 ns figure is a device maximum, not a promise that every configured path completes in exactly 30 ns. Analyze the slowest implemented product-term path, especially for address decode and control signals that fan out to multiple loads.
Follow the manufacturer PLCC land pattern and pin-1 orientation rather than relying on a generic 28-pin footprint drawing. Keep the programming interface accessible in the fixture, provide a stable supply referenced to the device ground, and review unused pins according to the datasheet's recommended configuration. Confirm the 11.51 mm by 11.51 mm body dimensions against the assembled PCB and mechanical clearance around the leaded package.
Design the 3.0 V to 5.5 V supply tolerance around the device's operating limits and place local bypass capacitance close to the package power pins. When the edge-sensing standby function is used, confirm that external pull networks do not defeat the intended low-power state. Account for configuration activity and I/O leakage when comparing the complete controller power budget.
合規資訊
The ATF22LV10CQZ-30JI is a programmable logic semiconductor and is not presented as an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation against the manufacturer's current material-declaration or product-compliance documentation.