Microchip Technology

ATSAMS70Q21A-CN - 300MHz Cortex-M7 MCU | Microchip Technology

MPN: ATSAMS70Q21A-CN ✓ सक्रिय
144-LFBGA (10 x 10 mm) Package 300 MHz Speed 2048 KB (2 MB) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ATSAMS70Q21A-CN अवलोकन

The Microchip Technology ATSAMS70Q21A-CN is a 32-bit ARM Cortex-M7 flash microcontroller with a floating-point unit, operating at up to 300 MHz and providing 2 MB of program Flash memory in a 144-LFBGA (10 x 10 mm) package. The device belongs to the SAMS70 family, combining high-speed Cortex-M7 processing with up to 384 KB of multi-port SRAM, including up to 256 KB that can be assigned to tightly coupled memory for zero-wait-state operation at 300 MHz.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The ATSAMS70Q21A-CN belongs to the ARM Cortex-M7 microcontroller hierarchy, a 32-bit embedded processor family suited to control, communications, and real-time signal-processing systems. Its Floating Point Unit accelerates calculations that would otherwise require software integer sequences, while its multi-port SRAM architecture supports concurrent instruction execution, data transfer, and peripheral activity.

The SAMS70 family combines 300 MHz processing performance with 2 MB of Flash and as much as 384 KB of SRAM. Up to 256 KB of SRAM can be configured as tightly coupled memory, supporting predictable zero-wait-state instruction and data access at the maximum operating frequency. This is particularly valuable in control loops and communications firmware where deterministic memory access is more important than large nonvolatile storage.

The 144-LFBGA package provides 144 connection positions in a compact 10 x 10 mm footprint. The small land pattern supports dense industrial, communications, and embedded-control assemblies, although PCB escape routing, thermal management, and manufacturing inspection require careful planning. A low-pin-count alternative with the same memory architecture may be easier to assemble, but it can provide fewer external interfaces and less routing flexibility.

Typical uses include industrial automation, motor and motion control, communications infrastructure, data acquisition, test and measurement equipment, and embedded human-machine interfaces. The Cortex-M7 core and floating-point support are useful for control algorithms, protocol processing, signal filtering, and graphical or communications workloads that benefit from predictable high-speed execution.

Designers should base pin assignment and PCB layout on the manufacturer’s 144-LFBGA pinout and package drawings. Keep high-speed interfaces away from noisy switching nodes, provide continuous power and ground-plane connections, and verify decoupling, signal integrity, and thermal requirements against the operating conditions of the finished assembly.

This page organizes the ATSAMS70Q21A-CN specifications, verified sourcing records, candidate drop-in alternatives, comparison parameters, and practical design guidance into a concise engineering reference for component selection and PCB planning.

के लिए ड्रॉप-इन विकल्प ATSAMS70Q21A-CN — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATSAMS70Q21A-CN (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Mounting Type, Processor Core, Product Type, Flash Memory.

Microchip Technology
Package: 144-pin LFBGA 10x10 mm
Mounting Type: Surface Mount (BGA, 0.8 mm pitch)
इसके साथ तुलना करें ATSAMS70Q21A-CN →
Microchip Technology
Processor Core: ARM Cortex-M7
Product Type: 32-bit ARM Cortex-M7 microcontroller
Flash Memory: 1 MB (1M x 8)
इसके साथ तुलना करें ATSAMS70Q21A-CN →
Microchip Technology
Package: 144-pin LFBGA, 10 mm x 10 mm
Processor Core: ARM Cortex-M7
Flash Memory: 2 MB (2048 KB)
इसके साथ तुलना करें ATSAMS70Q21A-CN →

ATSAMS70Q21A-CFN

✅ ड्रॉप-इन
📦 144-LFBGA (10 x 10 mm)
Matches the 300 MHz Cortex-M7 and 2 MB Flash ratings with 0 MHz and 0 KB differences; ordering-code-specific qualification must be checked

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMS70Q21A-CFNT

✅ ड्रॉप-इन
📦 144-LFBGA (10 x 10 mm)
Matches the 300 MHz Cortex-M7 and 2 MB Flash ratings with 0 MHz and 0 KB differences; ordering-code-specific qualification must be checked

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMS70Q21A-CNT

✅ ड्रॉप-इन
📦 144-LFBGA (10 x 10 mm)
Matches the 300 MHz Cortex-M7 and 2 MB Flash ratings with 0 MHz and 0 KB differences; ordering-code-specific qualification must be checked

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAMS70Q21B-CNT

✅ ड्रॉप-इन
📦 144-LFBGA (10 x 10 mm)
Matches the 300 MHz Cortex-M7 and 2 MB Flash ratings with 0 MHz and 0 KB differences; revision-specific errata and qualification must be checked

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ATSAME70Q21A-CN

✅ ड्रॉप-इन
Microchip Technology
📦 144-LFBGA (10 x 10 mm)
ARM Cortex-M7 with FPU · 300 MHz · 2 MB (2048 KB) · 384 KB · 16 KB · 16 KB · 1.62 V to 3.6 V · -40 C to +85 C (industrial)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATSAMS70Q21A-CN Maximum Ratings और Electrical Characteristics

Product Type 32-bit ARM Cortex-M7 flash microcontroller
Processor Core ARM Cortex-M7 with Floating Point Unit
Maximum CPU Frequency 300 MHz
Program Flash Memory 2048 KB (2 MB)
Flash Organization 2M x 8 bits
SRAM 384 KB
Tightly Coupled Memory Up to 256 KB
Architecture 32-bit
Microcontroller Family SAMS70
पैकेज 144-LFBGA (10 x 10 mm)
माउंटिंग प्रकार Surface mount
Manufacturer Microchip Technology
Factory Programming Factory programmable

ATSAMS70Q21A-CN 144-lfbga (10 x 10 mm) पिन कॉन्फ़िगरेशन गाइड

ATSAMS70Q21A-CN (144-lfbga (10 x 10 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATSAMS70Q21A-CN के लिए 144-lfbga (10 x 10 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATSAMS70Q21A-CN.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATSAMS70Q21A-CN के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Motor Drive and Motion Control, Industrial Communications Gateway, Precision Data Acquisition, Test and Measurement Equipment, Communications and RF Control Module.

🏭

Industrial Automation Controller

The ATSAMS70Q21A-CN fits industrial automation controllers that need deterministic control execution alongside network protocol handling. Its 300 MHz ARM Cortex-M7 core and Floating Point Unit accelerate filtering, state estimation, and closed-loop calculations, while 2 MB of Flash accommodates firmware, configuration, and diagnostic data. Up to 384 KB of multi-port SRAM supports concurrent communication and control tasks, including up to 256 KB allocated to tightly coupled memory for zero-wait-state access. In a controller, the MCU would operate alongside power conversion, sensor conditioning, isolation, and communication circuitry. The principal design consideration is partitioning memory and interrupts carefully so real-time control remains responsive under network traffic.

🔧

Motor Drive and Motion Control

The ATSAMS70Q21A-CN is suitable for sophisticated motor-drive and motion-control logic because its Cortex-M7 core operates at up to 300 MHz and includes hardware floating-point support. These resources are valuable for current-loop calculations, transform mathematics, speed estimation, and fault-state processing. The 2 MB Flash provides room for control code and parameter sets, while multi-port SRAM allows communications and control data to coexist with reduced contention. The MCU can coordinate PWM peripherals, position sensors, gate drivers, and protection logic, although the semiconductor power stage must be designed independently. Firmware should include safe-state behavior, sensor plausibility checks, and deterministic fault handling before the controller is connected to a motor.

🌐

Industrial Communications Gateway

The ATSAMS70Q21A-CN can serve as the processing core of an industrial communications gateway that combines protocol conversion, local control, and data buffering. Its 300 MHz Cortex-M7 performance allows Ethernet-class, serial, or fieldbus workloads to run alongside real-time tasks, while 2 MB of Flash stores firmware and protocol definitions. The multi-port SRAM architecture, reaching 384 KB, helps avoid contention between packet processing and peripheral transfers. Up to 256 KB can be assigned to tightly coupled memory when deterministic access is required. A practical implementation should isolate high-bandwidth interfaces from noisy power stages and use the manufacturer’s pin and electrical guidance to preserve signal integrity across long industrial interconnects.

📟

Precision Data Acquisition

The ATSAMS70Q21A-CN fits high-rate data-acquisition systems requiring real-time sampling control, digital filtering, and host communication. The 300 MHz Cortex-M7 core and Floating Point Unit support filter calculations and transformations without relying entirely on a host processor, while up to 384 KB of SRAM provides working space for buffers. The 2 MB Flash capacity is suitable for firmware, calibration tables, and embedded application code. In an analog measurement system, the MCU would coordinate ADC drivers, timing sources, and a communications interface while keeping sensitive analog and high-speed digital sections physically separated. Calibration, channel sequencing, and data-loss handling should be validated at the system level rather than treated solely as software functions.

🖥️

Test and Measurement Equipment

The ATSAMS70Q21A-CN is appropriate for test and measurement instruments where signal processing, control logic, and user-interface behavior must coexist. Its Cortex-M7 FPU supports calculations at up to 300 MHz, and the 2 MB Flash plus up to 384 KB of multi-port SRAM provide capacity for embedded algorithms, configuration, and acquisition buffers. The device can coordinate converters, instrumentation amplifiers, references, relays, and display peripherals in a compact instrument design. Its 144-LFBGA package reduces board area but complicates prototype assembly and inspection. Designers should plan test points, programming access, debug strategy, and thermal paths early, particularly when analog accuracy and digital timing performance share the same PCB.

📡

Communications and RF Control Module

The ATSAMS70Q21A-CN can act as the digital control processor in a communications or RF-control module requiring fast protocol execution, local filtering, and deterministic configuration updates. At up to 300 MHz, the Cortex-M7 with FPU can process control logic and numerical tasks alongside the device’s communication peripherals. Its 2 MB Flash supports embedded networking and configuration software, while the tightly coupled memory option can improve deterministic data access for up to 256 KB. The BGA package helps maintain a compact RF assembly, but decoupling, return paths, impedance-controlled routing, and thermal isolation are critical. The MCU should be placed so return currents do not cross sensitive RF paths, and all radio and safety requirements should be verified independently.

What is the ATSAMS70Q21A-CN?
The ATSAMS70Q21A-CN is a Microchip Technology 32-bit ARM Cortex-M7 flash microcontroller with a Floating Point Unit. According to the SAMS70 and SAME70 family datasheet 60001427B, the device operates at up to 300 MHz and provides 2 MB of Flash, up to 384 KB of multi-port SRAM, and a 144-LFBGA package measuring 10 x 10 mm.
What is the maximum operating frequency of ATSAMS70Q21A-CN?
The ATSAMS70Q21A-CN operates at up to 300 MHz. Microchip describes the SAMS70Q21 as a member of the SAMS70 family built around the 32-bit ARM Cortex-M7 processor with an FPU. The maximum frequency therefore supports high-rate control loops, communications processing, and floating-point calculations without moving those tasks to an external processor.
How much Flash and SRAM does ATSAMS70Q21A-CN have?
The ATSAMS70Q21A-CN includes 2048 KB, or 2 MB, of Flash memory and up to 384 KB of multi-port SRAM. According to datasheet 60001427B, up to 256 KB of the SRAM can be assigned as tightly coupled memory for data and instructions, delivering zero-wait-state access at 300 MHz when configured for that operating mode.
What package does ATSAMS70Q21A-CN use?
The ATSAMS70Q21A-CN is packaged in a 144-LFBGA measuring 10 x 10 mm. The compact surface-mount package supports dense embedded systems, but its 144 connection positions require fine-pitch PCB routing and careful escape design. Use the manufacturer’s package drawing and pin-description table when assigning BGA balls and planning vias.
Where can I download the ATSAMS70Q21A-CN datasheet PDF?
The ATSAMS70Q21A-CN datasheet PDF is available from Microchip through the SAMS70 and SAME70 Microcontroller Families document 60001427B. That document covers the shared Cortex-M7 architecture, Flash and SRAM organization, package information, peripherals, and electrical characteristics. The manufacturer’s ATSAMS70Q21 product page is the appropriate starting point for revision-specific documentation.
Where can I find the ATSAMS70Q21A-CN pinout?
The ATSAMS70Q21A-CN pinout is documented in the pin-description and package sections of Microchip’s SAMS70 and SAME70 family documentation. Because the device uses a 144-LFBGA package, verify every ball assignment against the exact ordering code and package drawing before PCB routing. The 10 x 10 mm BGA outline should not be inferred from the 144-pin count alone.
Can the ATSAMS70Q21A-CN be used for motor control?
Yes, the ATSAMS70Q21A-CN is suitable for many motor-control applications because its Cortex-M7 core runs at up to 300 MHz and includes an FPU. Those resources support current-loop calculation, control filtering, and communications handling. The final design must also provide suitable power conversion, isolation where required, signal conditioning, and protection around the MCU.
What is the difference between ATSAMS70Q21A-CN and ATSAME70Q21A-CN?
ATSAMS70Q21A-CN belongs to Microchip’s SAMS70 family, while ATSAME70Q21A-CN belongs to the SAME70 family. Both listings identify a 32-bit Cortex-M7 device with 300 MHz operation, 2 MB of Flash, and a 144-LFBGA package. Device-specific peripheral, qualification, and errata requirements must still be checked before treating one ordering code as a drop-in substitute.
When should I choose ATSAMS70Q21A-CN over another Cortex-M7 MCU?
Choose the ATSAMS70Q21A-CN when a design needs the combination of a 300 MHz Cortex-M7 with FPU, 2 MB of Flash, up to 384 KB of multi-port SRAM, and a compact 144-LFBGA package. A different MCU may be preferable when its package is easier to assemble, its peripherals match more directly, or its qualification and lifecycle terms better fit the application.
Is ATSAMS70Q21A-CN suitable for industrial automation?
The ATSAMS70Q21A-CN is a strong fit for industrial automation controllers that benefit from 300 MHz processing, deterministic tightly coupled memory, and substantial embedded Flash. Its suitability still depends on the required operating-temperature range, isolation, analog interfaces, safety functions, and environmental qualification. Confirm those requirements against the manufacturer’s device documentation before release.
What can replace the ATSAMS70Q21A-CN?
The closest documented same-package candidates are Microchip ordering variants and the ATSAME70Q21A-CN, but a valid replacement requires matching the 144-LFBGA footprint, pin functions, memory configuration, peripheral set, qualification, and firmware assumptions. The ATSAME70Q21A-CN is a functional family alternative rather than an automatic substitute; review the manufacturer’s errata and migration documentation before changing an approved design.
Is ATSAME70Q21A-CN the same as ATSAMS70Q21A-CN?
No, the two ordering codes identify different Microchip product families even though both listings show 32-bit Cortex-M7 operation at 300 MHz, 2 MB of Flash, and a 144-LFBGA package. The SAMS70 and SAME70 devices have family-specific peripherals and documentation. They should be treated as drop-in candidates only after a complete pin, peripheral, clock, and software compatibility review.
What are the key specifications engineers should know about ATSAMS70Q21A-CN?
The key engineering facts are 300 MHz maximum Cortex-M7 operation, a 2 MB Flash configuration, up to 384 KB of multi-port SRAM, up to 256 KB of tightly coupled memory, and a 144-LFBGA package measuring 10 x 10 mm. According to datasheet 60001427B, the processor includes a Floating Point Unit, making the device suitable for real-time control and communications workloads.
Where can I buy ATSAMS70Q21A-CN and check its lead time?
Use the Request a Quote form on this page to request ATSAMS70Q21A-CN availability, current commercial terms, and the lead time for the quantity you need. The manufacturer-direct record identifies the exact ordering code as factory programmable and lists partial-tray inventory. Packaging, programmed configuration, and delivery quantity should be confirmed with the quote team.
What is the price of ATSAMS70Q21A-CN?
The current ATSAMS70Q21A-CN commercial price is displayed through the Request a Quote form on this page. The exact amount can change with order quantity, package handling, programmed configuration, and market availability. Submit the required quantity and procurement details through that form to obtain a current quotation rather than relying on an outdated catalog figure.

के लिए इंजीनियरिंग संदर्भ डेटा ATSAMS70Q21A-CN — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ATSAMS70Q21A-CN when the design needs a 300 MHz ARM Cortex-M7 with FPU, 2 MB of Flash, up to 384 KB of multi-port SRAM, and a compact 144-LFBGA package. Its tightly coupled memory capability is particularly useful for deterministic control code and high-speed data access. The ATSAMS70Q21A-CFN, ATSAMS70Q21A-CFNT, ATSAMS70Q21A-CNT, and ATSAMS70Q21B-CNT are same-family ordering candidates with matching core-performance and Flash ratings, but their qualification, temperature, revision, and ordering conditions must be checked. Consider ATSAME70Q21A-CN only when its different family-specific peripherals and software requirements are acceptable. If the 144-LFBGA is difficult to assemble, a lower-pin-count MCU may be a better manufacturing choice even though it is not a drop-in replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATSAMS70Q21A-CFN ATSAMS70Q21A-CFNT ATSAMS70Q21A-CNT ATSAMS70Q21B-CNT ATSAME70Q21A-CN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 144-LFBGA (10 x 10 mm) 144-LFBGA (10 x 10 mm) 144-LFBGA (10 x 10 mm) 144-LFBGA (10 x 10 mm) 144-LFBGA (10 x 10 mm) 144-LFBGA (10 x 10 mm)
Processor Core ARM Cortex-M7 with FPU ARM Cortex-M7 with FPU ARM Cortex-M7 with FPU ARM Cortex-M7 with FPU ARM Cortex-M7 with FPU ARM Cortex-M7 with FPU
Maximum CPU Frequency 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz 300 MHz
Flash Memory 2048 KB 2048 KB 2048 KB 2048 KB 2048 KB 2048 KB
Product Family SAMS70 SAMS70 SAMS70 SAMS70 SAMS70 SAME70
Ordering-Code Qualification A-CN A-CFN A-CFNT A-CNT B-CNT A-CN

मुख्य विशेषताएँ

  • Combines 300 MHz Cortex-M7 processing with dedicated tightly coupled memory capability (बनामATSAME70Q21A-CN)
  • Provides substantial embedded memory for control firmware and protocol stacks (बनामATSAMS70Q21A-CFN)
  • Uses a compact 144-LFBGA footprint for space-constrained control systems (बनामATSAMS70Q21A-CNT)
  • Offers a Floating Point Unit within a high-performance 32-bit embedded platform (बनामATSAMS70Q21B-CNT)

डिज़ाइन नोट्स

Plan the 144-LFBGA layout from the manufacturer’s ball map and package drawing rather than treating it as a generic BGA. Escape the fine-pitch perimeter balls on the layers specified by the package design, maintain the required pad and via geometry, and verify the design against the PCB assembler’s capabilities. Use a continuous ground reference beneath the device and avoid splitting return paths under high-speed interfaces.

Follow the manufacturer’s decoupling and power-supply recommendations for every voltage rail, including the placement and selection of bulk and high-frequency capacitors. Separate sensitive analog supplies from switching-converter stages where the architecture permits. Validate startup sequencing, rail tolerances, and worst-case current demand across temperature; the ATSAMS70Q21A-CN’s 300 MHz capability does not by itself guarantee adequate power integrity at the device pins.

Although the 144-LFBGA is compact, performance and peripheral activity can produce meaningful internal dissipation. Provide uninterrupted thermal-via structures and adequate copper area, then estimate worst-case junction temperature using the package thermal model and actual board construction. Recheck thermal behavior at maximum clock, sustained communications activity, and the highest expected ambient temperature rather than relying on nominal laboratory conditions.

Route clocks, memory, and high-speed communication signals with continuous references, controlled impedance, and practical length matching where the peripheral requires it. Keep switching-node copper and high-current return paths away from sensitive inputs. Because the device can execute at 300 MHz, signal-integrity validation should include the actual stack-up, connector or transceiver path, and PCB tolerances rather than relying only on schematic connectivity.

Do not treat an ordering code with the same BGA outline as an unconditional substitute. For each alternative, compare ball functions, power rails, peripheral instances, interrupt assignments, boot configuration, clocking, package height, temperature grade, qualification, and errata. The ATSAME70Q21A-CN uses a different product family from the SAMS70 device, so firmware and peripheral-equivalence checks remain necessary even when the package dimensions match.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance status was not stated in the manufacturer, distributor, or cross-reference records used for this product. The -CN ordering code identifies the package variant and does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ATSAMS70Q21A-CN datasheet ATSAMS70Q21A-CN pinout ATSAMS70Q21A-CN datasheet pdf ATSAMS70Q21A-CN 144 LFBGA ATSAMS70Q21A-CN 300MHz Cortex-M7 ATSAMS70Q21A-CN 2MB Flash 384KB SRAM ATSAMS70Q21A-CN equivalent ATSAMS70Q21A-CN replacement ATSAMS70Q21A-CN cross reference ATSAMS70Q21A-CN vs ATSAME70Q21A-CN ATSAMS70Q21A-CN footprint ATSAMS70Q21A-CN application circuit Microchip ATSAMS70Q21A-CN ATSAMS70Q21A-CN price ATSAMS70Q21A-CN stock

संबंधित कंपोनेंट्स और शब्द

Microchip Technology ATSAMS70Q21A-CN ATSAMS70Q21A-CFN ATSAMS70Q21A-CFNT ATSAMS70Q21A-CNT ATSAMS70Q21B-CNT ATSAME70Q21A-CN ARM Cortex-M7 Floating Point Unit SAMS70 SAME70 32-bit microcontroller flash microcontroller microcontroller semiconductor embedded processor 144-LFBGA BGA package surface-mount package 2 MB Flash 384 KB SRAM tightly coupled memory 300 MHz industrial automation motor control
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें