ATSAMS70Q21A-CN - 300MHz Cortex-M7 MCU | Microchip Technology
MPN: ATSAMS70Q21A-CN ✓ 啟用中ATSAMS70Q21A-CN 概覽
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces into one device. The ATSAMS70Q21A-CN belongs to the ARM Cortex-M7 microcontroller hierarchy, a 32-bit embedded processor family suited to control, communications, and real-time signal-processing systems. Its Floating Point Unit accelerates calculations that would otherwise require software integer sequences, while its multi-port SRAM architecture supports concurrent instruction execution, data transfer, and peripheral activity.
The SAMS70 family combines 300 MHz processing performance with 2 MB of Flash and as much as 384 KB of SRAM. Up to 256 KB of SRAM can be configured as tightly coupled memory, supporting predictable zero-wait-state instruction and data access at the maximum operating frequency. This is particularly valuable in control loops and communications firmware where deterministic memory access is more important than large nonvolatile storage.
The 144-LFBGA package provides 144 connection positions in a compact 10 x 10 mm footprint. The small land pattern supports dense industrial, communications, and embedded-control assemblies, although PCB escape routing, thermal management, and manufacturing inspection require careful planning. A low-pin-count alternative with the same memory architecture may be easier to assemble, but it can provide fewer external interfaces and less routing flexibility.
Typical uses include industrial automation, motor and motion control, communications infrastructure, data acquisition, test and measurement equipment, and embedded human-machine interfaces. The Cortex-M7 core and floating-point support are useful for control algorithms, protocol processing, signal filtering, and graphical or communications workloads that benefit from predictable high-speed execution.
Designers should base pin assignment and PCB layout on the manufacturer’s 144-LFBGA pinout and package drawings. Keep high-speed interfaces away from noisy switching nodes, provide continuous power and ground-plane connections, and verify decoupling, signal integrity, and thermal requirements against the operating conditions of the finished assembly.
This page organizes the ATSAMS70Q21A-CN specifications, verified sourcing records, candidate drop-in alternatives, comparison parameters, and practical design guidance into a concise engineering reference for component selection and PCB planning.
直接替換替代品,適用於 ATSAMS70Q21A-CN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: ATSAMS70Q21A-CN (相同外形與佔位) — 差異在於 Package, Mounting Type, Processor Core, Product Type, Flash Memory.
ATSAMS70Q21A-CFN
✅ 直接替換📋 參考替代品(不在目錄中)
ATSAMS70Q21A-CFNT
✅ 直接替換📋 參考替代品(不在目錄中)
ATSAMS70Q21A-CNT
✅ 直接替換📋 參考替代品(不在目錄中)
ATSAMS70Q21B-CNT
✅ 直接替換📋 參考替代品(不在目錄中)
ATSAME70Q21A-CN
✅ 直接替換聯絡詢價
查看資料表 →ATSAMS70Q21A-CN 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M7 flash microcontroller |
| Processor Core | ARM Cortex-M7 with Floating Point Unit |
| Maximum CPU Frequency | 300 MHz |
| Program Flash Memory | 2048 KB (2 MB) |
| Flash Organization | 2M x 8 bits |
| SRAM | 384 KB |
| Tightly Coupled Memory | Up to 256 KB |
| Architecture | 32-bit |
| Microcontroller Family | SAMS70 |
| 封裝 | 144-LFBGA (10 x 10 mm) |
| 安裝類型 | Surface mount |
| Manufacturer | Microchip Technology |
| Factory Programming | Factory programmable |
ATSAMS70Q21A-CN 144-lfbga (10 x 10 mm) 腳位配置指南
ATSAMS70Q21A-CN(144-lfbga (10 x 10 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: ATSAMS70Q21A-CN.
請參閱 資料表 以查看完整腳位配置。
典型應用
ATSAMS70Q21A-CN 適用於 6 應用s: Industrial Automation Controller, Motor Drive and Motion Control, Industrial Communications Gateway, Precision Data Acquisition, Test and Measurement Equipment, Communications and RF Control Module.
Industrial Automation Controller
The ATSAMS70Q21A-CN fits industrial automation controllers that need deterministic control execution alongside network protocol handling. Its 300 MHz ARM Cortex-M7 core and Floating Point Unit accelerate filtering, state estimation, and closed-loop calculations, while 2 MB of Flash accommodates firmware, configuration, and diagnostic data. Up to 384 KB of multi-port SRAM supports concurrent communication and control tasks, including up to 256 KB allocated to tightly coupled memory for zero-wait-state access. In a controller, the MCU would operate alongside power conversion, sensor conditioning, isolation, and communication circuitry. The principal design consideration is partitioning memory and interrupts carefully so real-time control remains responsive under network traffic.
推薦
Motor Drive and Motion Control
The ATSAMS70Q21A-CN is suitable for sophisticated motor-drive and motion-control logic because its Cortex-M7 core operates at up to 300 MHz and includes hardware floating-point support. These resources are valuable for current-loop calculations, transform mathematics, speed estimation, and fault-state processing. The 2 MB Flash provides room for control code and parameter sets, while multi-port SRAM allows communications and control data to coexist with reduced contention. The MCU can coordinate PWM peripherals, position sensors, gate drivers, and protection logic, although the semiconductor power stage must be designed independently. Firmware should include safe-state behavior, sensor plausibility checks, and deterministic fault handling before the controller is connected to a motor.
推薦
Industrial Communications Gateway
The ATSAMS70Q21A-CN can serve as the processing core of an industrial communications gateway that combines protocol conversion, local control, and data buffering. Its 300 MHz Cortex-M7 performance allows Ethernet-class, serial, or fieldbus workloads to run alongside real-time tasks, while 2 MB of Flash stores firmware and protocol definitions. The multi-port SRAM architecture, reaching 384 KB, helps avoid contention between packet processing and peripheral transfers. Up to 256 KB can be assigned to tightly coupled memory when deterministic access is required. A practical implementation should isolate high-bandwidth interfaces from noisy power stages and use the manufacturer’s pin and electrical guidance to preserve signal integrity across long industrial interconnects.
推薦
Precision Data Acquisition
The ATSAMS70Q21A-CN fits high-rate data-acquisition systems requiring real-time sampling control, digital filtering, and host communication. The 300 MHz Cortex-M7 core and Floating Point Unit support filter calculations and transformations without relying entirely on a host processor, while up to 384 KB of SRAM provides working space for buffers. The 2 MB Flash capacity is suitable for firmware, calibration tables, and embedded application code. In an analog measurement system, the MCU would coordinate ADC drivers, timing sources, and a communications interface while keeping sensitive analog and high-speed digital sections physically separated. Calibration, channel sequencing, and data-loss handling should be validated at the system level rather than treated solely as software functions.
推薦
Test and Measurement Equipment
The ATSAMS70Q21A-CN is appropriate for test and measurement instruments where signal processing, control logic, and user-interface behavior must coexist. Its Cortex-M7 FPU supports calculations at up to 300 MHz, and the 2 MB Flash plus up to 384 KB of multi-port SRAM provide capacity for embedded algorithms, configuration, and acquisition buffers. The device can coordinate converters, instrumentation amplifiers, references, relays, and display peripherals in a compact instrument design. Its 144-LFBGA package reduces board area but complicates prototype assembly and inspection. Designers should plan test points, programming access, debug strategy, and thermal paths early, particularly when analog accuracy and digital timing performance share the same PCB.
推薦
Communications and RF Control Module
The ATSAMS70Q21A-CN can act as the digital control processor in a communications or RF-control module requiring fast protocol execution, local filtering, and deterministic configuration updates. At up to 300 MHz, the Cortex-M7 with FPU can process control logic and numerical tasks alongside the device’s communication peripherals. Its 2 MB Flash supports embedded networking and configuration software, while the tightly coupled memory option can improve deterministic data access for up to 256 KB. The BGA package helps maintain a compact RF assembly, but decoupling, return paths, impedance-controlled routing, and thermal isolation are critical. The MCU should be placed so return currents do not cross sensitive RF paths, and all radio and safety requirements should be verified independently.
推薦
推薦產品摘要
工程參考資料,適用於 ATSAMS70Q21A-CN — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | ATSAMS70Q21A-CFN | ATSAMS70Q21A-CFNT | ATSAMS70Q21A-CNT | ATSAMS70Q21B-CNT | ATSAME70Q21A-CN |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) | 144-LFBGA (10 x 10 mm) |
| Processor Core | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU | ARM Cortex-M7 with FPU |
| Maximum CPU Frequency | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz | 300 MHz |
| Flash Memory | 2048 KB | 2048 KB | 2048 KB | 2048 KB | 2048 KB | 2048 KB |
| Product Family | SAMS70 | SAMS70 | SAMS70 | SAMS70 | SAMS70 | SAME70 |
| Ordering-Code Qualification | A-CN | A-CFN | A-CFNT | A-CNT | B-CNT | A-CN |
主要差異化特點
- Combines 300 MHz Cortex-M7 processing with dedicated tightly coupled memory capability (對比ATSAME70Q21A-CN)
- Provides substantial embedded memory for control firmware and protocol stacks (對比ATSAMS70Q21A-CFN)
- Uses a compact 144-LFBGA footprint for space-constrained control systems (對比ATSAMS70Q21A-CNT)
- Offers a Floating Point Unit within a high-performance 32-bit embedded platform (對比ATSAMS70Q21B-CNT)
設計說明
Plan the 144-LFBGA layout from the manufacturer’s ball map and package drawing rather than treating it as a generic BGA. Escape the fine-pitch perimeter balls on the layers specified by the package design, maintain the required pad and via geometry, and verify the design against the PCB assembler’s capabilities. Use a continuous ground reference beneath the device and avoid splitting return paths under high-speed interfaces.
Follow the manufacturer’s decoupling and power-supply recommendations for every voltage rail, including the placement and selection of bulk and high-frequency capacitors. Separate sensitive analog supplies from switching-converter stages where the architecture permits. Validate startup sequencing, rail tolerances, and worst-case current demand across temperature; the ATSAMS70Q21A-CN’s 300 MHz capability does not by itself guarantee adequate power integrity at the device pins.
Although the 144-LFBGA is compact, performance and peripheral activity can produce meaningful internal dissipation. Provide uninterrupted thermal-via structures and adequate copper area, then estimate worst-case junction temperature using the package thermal model and actual board construction. Recheck thermal behavior at maximum clock, sustained communications activity, and the highest expected ambient temperature rather than relying on nominal laboratory conditions.
Route clocks, memory, and high-speed communication signals with continuous references, controlled impedance, and practical length matching where the peripheral requires it. Keep switching-node copper and high-current return paths away from sensitive inputs. Because the device can execute at 300 MHz, signal-integrity validation should include the actual stack-up, connector or transceiver path, and PCB tolerances rather than relying only on schematic connectivity.
Do not treat an ordering code with the same BGA outline as an unconditional substitute. For each alternative, compare ball functions, power rails, peripheral instances, interrupt assignments, boot configuration, clocking, package height, temperature grade, qualification, and errata. The ATSAME70Q21A-CN uses a different product family from the SAMS70 device, so firmware and peripheral-equivalence checks remain necessary even when the package dimensions match.
合規資訊
Compliance status was not stated in the manufacturer, distributor, or cross-reference records used for this product. The -CN ordering code identifies the package variant and does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.