Microchip Technology

ATXMEGA64D4-MN - 32MHz 64KB AVR XMEGA MCU | Microchip

MPN: ATXMEGA64D4-MN ✓ सक्रिय
1.6 V to 3.6 V Vdss 44-pin VQFN, 7 x 7 mm Package 32 MHz Speed 64 KB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

ATXMEGA64D4-MN अवलोकन

The Microchip Technology ATXMEGA64D4-MN is an 8/16-bit AVR XMEGA microcontroller with a 32 MHz clock, 64 KB of programmable Flash, 2 KB of EEPROM, and 4 KB of SRAM in a 44-pin VQFN 7 x 7 mm package. It combines a 16-bit AVR enhanced RISC core with a four-channel event system, programmable multilevel interrupts, four 16-bit timer/counters, two USARTs, and two two-wire serial interfaces.

An AVR XMEGA microcontroller is an embedded-control device within the wider microcontroller, embedded-processing, and semiconductor hierarchy. XMEGA devices combine deterministic event handling with conventional interrupt processing and extensive serial connectivity. This makes them suitable for compact control systems that need more timing and communication resources than a basic 8-bit MCU without moving to a more complex general-purpose processor.

The ATXMEGA64D4-MN provides 64 KB of in-system-programmable Flash with read-while-write support and a 4 KB boot-code section. Its 2 KB EEPROM supports nonvolatile parameter storage, while 4 KB of SRAM accommodates working data and interrupt or communication buffers. The device operates from a 1.6 V to 3.6 V supply and is identified as an extended-temperature 105°C-qualified option in its product listing.

The four-channel event system lets multiple peripherals request actions without relying exclusively on central interrupt servicing. A 16-bit real-time counter and four flexible 16-bit timer/counters provide time measurement, timing control, compare outputs, and PWM generation. Two USARTs and two TWI interfaces support asynchronous serial links and addressable buses. The AVR enhanced RISC architecture provides the high-performance, low-power operation associated with the XMEGA family.

Typical applications include industrial sensor controllers, building and access-control equipment, compact motor-control modules, communication hubs, data-acquisition nodes, and low-power embedded instruments. The 44-pin VQFN format also supports dense PCB layouts where a reduced package size is important and adequate copper and thermal design are available.

When laying out the board, follow the manufacturer pin-description table and recommended VQFN land pattern. Pay particular attention to supply decoupling, clock stability, programming-interface access, exposed-pad thermal management, and the pin assignments of the event system and communication peripherals. Confirm the exact operating modes and peripheral connections in the manufacturer datasheet before finalizing the schematic.

This page combines the manufacturer's device characteristics with package-aware replacement guidance, application analysis, comparison parameters, and practical PCB design notes. It is intended to help engineers determine whether the ATXMEGA64D4-MN provides the required memory, timing, serial connectivity, package size, and operating range without overstating unverified cross-brand compatibility.

के लिए ड्रॉप-इन विकल्प ATXMEGA64D4-MN — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ATXMEGA64D4-MN (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, EEPROM Memory, Flash Memory, Product Type, Timer/Counter Count.

Microchip Technology
Package: 44-VQFN, 7 x 7 mm
EEPROM Memory: 1 KB
Flash Memory: 32 KB (16K x 16)
इसके साथ तुलना करें ATXMEGA64D4-MN →
Microchip Technology
Package: 64-VFQFN with exposed pad
Flash Memory: 64 KB
Product Type: 8/16-bit AVR XMEGA D3 microcontroller
इसके साथ तुलना करें ATXMEGA64D4-MN →

ATXMEGA64D3-MN

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 44-pin VQFN (7 x 7 mm)
8/16-bit AVR XMEGA D3 microcontroller · 32 MHz · 64 KB · 32K x 16 · 4 KB · 2 KB · 4 KB · 1.6 V to 3.6 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATXMEGA32D4-MN

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Microchip Technology
📦 44-pin VQFN (7 x 7 mm)
8/16-bit AVR XMEGA microcontroller · 32 MHz · 32 KB (16K x 16) · 4 KB · Supported · 1 KB · 4 KB · 34

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ATXMEGA64D4-MN Maximum Ratings और Electrical Characteristics

Device Type 8/16-bit AVR XMEGA microcontroller
Maximum CPU Clock Frequency 32 MHz
Program Flash Memory 64 KB
Boot Loader Section 4 KB
EEPROM Memory 2 KB
SRAM Memory 4 KB
General-Purpose I/O 34 lines
Event System Channels 4 channels
Real-Time Counter 16-bit
Timer/Counter Count 4 timers/counters at 16-bit resolution
USART Count 2 serial interfaces
Two-Wire Interface Count 2 serial interfaces
Supply Voltage Range 1.6 V to 3.6 V
Maximum Operating Temperature 105 °C
पैकेज 44-pin VQFN, 7 x 7 mm
माउंटिंग प्रकार Surface mount
Flash Programming In-system programmable with read-while-write

ATXMEGA64D4-MN 44-pin vqfn, 7 x 7 mm पिन कॉन्फ़िगरेशन गाइड

ATXMEGA64D4-MN (44-pin vqfn, 7 x 7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

ATXMEGA64D4-MN के लिए 44-pin vqfn, 7 x 7 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ATXMEGA64D4-MN.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ATXMEGA64D4-MN के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor and Data-Acquisition Controller, Building Access and Security Control, Compact Motor and Actuator Control, Low-Power Communication Hub, Precision Timing and PWM Module, Embedded Instrumentation and Diagnostics.

🏭

Industrial Sensor and Data-Acquisition Controller

The ATXMEGA64D4-MN fits compact sensor nodes that must sample, condition data locally, and communicate over limited industrial links. Its 32 MHz AVR core provides useful processing headroom, while 64 KB of Flash accommodates application code and a 4 KB boot section, and 4 KB of SRAM supports working buffers. The four 16-bit timer/counters support accurate sampling intervals, and two USARTs or TWI interfaces can connect local sensors and a host. Its 1.6 V to 3.6 V range also simplifies low-voltage rail partitioning.

🏭

Building Access and Security Control

The ATXMEGA64D4-MN is suitable for access-control readers, lock controllers, and security modules that coordinate several real-time inputs. The four-channel event system can link peripheral events to deterministic actions, while four 16-bit timer/counters help manage timing, debounce, pulse checks, and motor or latch control. Two USARTs and two TWI interfaces provide options for reader peripherals, expansion modules, or secure communications. Its 64 KB Flash also allows room for protocol handling, diagnostics, and update-oriented bootloader code.

🔧

Compact Motor and Actuator Control

The ATXMEGA64D4-MN can coordinate timing-sensitive actuator functions in compact motor-control modules. Its four 16-bit timer/counters provide compare and PWM channels, while the four-channel event system helps synchronize peripheral actions without relying entirely on interrupt latency. The 32 MHz CPU handles direction logic, fault states, and communications, and 2 KB EEPROM can retain calibration or configuration values. An external driver, current protection, and appropriate transient handling remain necessary because the MCU is a controller rather than the motor power stage.

🌐

Low-Power Communication Hub

The ATXMEGA64D4-MN is well matched to protocol converters and small communication concentrators that must bridge several embedded interfaces. Two USARTs support asynchronous links, and two TWI interfaces provide addressable bus connectivity, allowing multiple protocols to coexist in one controller. The four-channel event system can coordinate data movement and peripheral events, while 4 KB of SRAM provides space for active buffers. Its 1.6 V minimum operating voltage supports low-voltage logic integration, subject to each external interface's level and timing requirements.

⚡

Precision Timing and PWM Module

The ATXMEGA64D4-MN suits modules requiring accurate repeated timing, pulse measurement, or configurable PWM outputs. Four 16-bit timer/counters divide the work among independent timing channels, and the 32 MHz CPU leaves processing capacity for measurement calculations, diagnostics, and communications. The four-channel event system improves coordination among timers, communication peripherals, and GPIO activity. At the same time, the 44-pin VQFN package saves board area, making the device useful for compact timing boards and multi-channel control modules.

🖥️

Embedded Instrumentation and Diagnostics

The ATXMEGA64D4-MN can serve as the control core in compact instruments that combine measurement timing, local status reporting, and downloadable firmware. The 64 KB Flash provides space for measurement routines and communication protocols, while the 4 KB boot section supports a bootloader strategy. Two USARTs can connect a computer interface and a local sensor link, and the event system helps coordinate periodic sampling. Its extended-temperature listing is useful in demanding equipment, although the complete product still requires calibrated analog front ends and suitable enclosure design.

अनुशंसित उत्पादों का सारांश

What are the key specifications of ATXMEGA64D4-MN that engineers should know?
The ATXMEGA64D4-MN is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 64 KB Flash, 2 KB EEPROM, 4 KB SRAM, and 34 general-purpose I/O lines in a 44-pin VQFN package. According to the manufacturer datasheet, it also provides a four-channel event system, four 16-bit timer/counters, two USARTs, and two TWI interfaces. Its 1.6 V to 3.6 V operating range makes it appropriate for low-voltage embedded systems requiring deterministic peripheral interaction and substantial serial connectivity.
What is the operating voltage of ATXMEGA64D4-MN?
The ATXMEGA64D4-MN operates from 1.6 V to 3.6 V according to the manufacturer device documentation. This supply range suits low-voltage embedded products, but every connected peripheral must also tolerate the selected rail. During schematic design, verify the minimum operating voltage for the configured clock speed and confirm all external interface levels in the manufacturer datasheet before fixing the system power architecture.
Where can I download the ATXMEGA64D4-MN datasheet PDF?
The official ATxmega16D4, ATxmega32D4, ATxmega64D4, and ATxmega128D4 family datasheet is available from Microchip's document server at the datasheet URL on this page. According to Microchip, that document covers the common XMEGA D4 architecture and device variants. Use its pin-description and electrical-characteristics tables together with the ATXMEGA64D4-MN ordering information when assigning pins and designing the PCB.
Where can I find the ATXMEGA64D4-MN pinout and 44-pin VQFN footprint?
The manufacturer datasheet contains the authoritative 44-pin VQFN pin description and package drawing for the ATXMEGA64D4 family. Use its pin table when assigning power, ground, programming, clock, communication, and GPIO functions. The listing identifies the package as 44-pin VQFN measuring 7 x 7 mm. Confirm exposed-pad, thermal-pad, pin-1, and recommended-land-pattern details directly from the manufacturer drawing before fabrication.
What can replace the ATXMEGA64D4-MN on the same PCB footprint?
No cross-manufacturer, pin-for-pin replacement is established for the ATXMEGA64D4-MN in the available technical records. Two same-family Microchip candidates can be evaluated during a redesign: ATXMEGA64D3-MN and ATXMEGA32D4-MN. They are not unconditional substitutes because the D3 device changes event-system resources and the 32D4 device reduces Flash memory. Validate clock, peripheral, pin, memory, and firmware requirements before treating either candidate as a drop-in replacement.
When should I choose ATXMEGA64D4-MN over ATXMEGA64D3-MN?
Choose the ATXMEGA64D4-MN when the design requires the full D4 event-system feature set and four-channel event handling. The ATXMEGA64D3-MN is more appropriate when the reduced event-system configuration is sufficient and the design can be requalified around that limitation. Both are members of the same AVR XMEGA family, but their peripheral resources must be compared at signal and firmware level before a board revision.
Is ATXMEGA64D4-MN suitable for industrial sensor and control systems?
The ATXMEGA64D4-MN is suitable for compact industrial sensor and control systems that need low-voltage operation, deterministic timing, and multiple serial interfaces. Its 32 MHz CPU, four-channel event system, four 16-bit timer/counters, two USARTs, and two TWI interfaces support acquisition, local processing, actuator timing, and sensor networking. The listed 105°C maximum operating temperature supports extended-temperature designs, although enclosure, voltage, EMC, and system-level qualification must also be addressed.
What is the difference between ATXMEGA64D4-MN and ATXMEGA32D4-MN?
The primary documented difference is Flash capacity: ATXMEGA64D4-MN provides 64 KB, while ATXMEGA32D4-MN provides 32 KB, a 32 KB or 50% reduction. Both belong to the AVR XMEGA D4 family and use the same 1.6 V to 3.6 V architecture. The smaller device is suitable only if application code, boot code, update images, and future expansion remain below its lower memory ceiling. Pin and peripheral equivalence must still be confirmed on the manufacturer package documentation.
How much Flash, EEPROM, and SRAM does ATXMEGA64D4-MN have?
The ATXMEGA64D4-MN contains 64 KB of programmable Flash, including a 4 KB boot-code section, 2 KB of EEPROM, and 4 KB of SRAM. According to the manufacturer datasheet, Flash supports in-system programming and read-while-write operation. The SRAM amount is an important constraint for buffered sampling and communications, while EEPROM can retain calibration data or configuration values when the main Flash is reprogrammed.
Does ATXMEGA64D4-MN support UART and I2C communications?
The ATXMEGA64D4-MN includes two USARTs and two two-wire serial interfaces for external communications. The manufacturer datasheet identifies the two-wire interfaces as TWI, allowing addressable bus connections where the electrical and protocol details match. Because both interface types are fixed-function peripherals, confirm pin multiplexing, bus speed, electrical levels, and peripheral availability against the device pin table before assigning board connections.
What is the best Microchip equivalent for ATXMEGA64D4-MN?
The closest same-family starting points are ATXMEGA64D3-MN and ATXMEGA32D4-MN, but neither is a guaranteed drop-in replacement for every ATXMEGA64D4-MN design. ATXMEGA64D3-MN changes event-system resources, while ATXMEGA32D4-MN reduces Flash from 64 KB to 32 KB. Use Microchip's cross-reference and the manufacturer family datasheet, then review bootloader size, firmware dependencies, peripheral allocation, and package assignments.
How do I design the power and decoupling network for ATXMEGA64D4-MN?
Design the ATXMEGA64D4-MN around its 1.6 V to 3.6 V operating range and the decoupling values specified in the manufacturer datasheet. Place the required supply capacitor physically close to the device's supply and ground pins, and route return current without long loops through the VQFN footprint. Verify brownout, startup, clock, and peripheral operating requirements across temperature. These measures reduce supply disturbance and improve the reliability of Flash programming and serial communications.
Can ATXMEGA64D4-MN handle motor timing and PWM control?
The ATXMEGA64D4-MN can support motor-timing and PWM-control tasks because it provides four 16-bit timer/counters with compare and PWM channels and a four-channel event system. These resources allow timing events to be coordinated across peripherals while the CPU handles control logic. The MCU does not directly replace a power-stage driver, so motor current, protection, voltage transients, isolation, and thermal requirements must be addressed by the surrounding power electronics.
Is ATXMEGA64D4-MN in stock and what is its lead time?
Current stock and production lead time for the ATXMEGA64D4-MN should be confirmed through the Request a Quote form on this page. The listing identifies the exact MPN and package, but it does not establish a current XAIPART inventory quantity or manufacturing schedule. Request the required quantity, date-code policy, and target delivery date so procurement can confirm allocation and schedule without relying on an unconfirmed lead-time estimate.
How much does ATXMEGA64D4-MN cost?
A current unit and quantity-break quotation for ATXMEGA64D4-MN is available through the Request a Quote form on this page. Pricing depends on order quantity, date code, packaging configuration, procurement timing, and market conditions. Submit the exact MPN, target quantity, and required delivery terms so the quote can reflect the intended production order rather than a generic or historical price reference.

के लिए इंजीनियरिंग संदर्भ डेटा ATXMEGA64D4-MN — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ATXMEGA64D4-MN when a design needs the full four-channel D4 event system, 64 KB of Flash, 2 KB of EEPROM, 4 KB of SRAM, and the combined peripheral set of four 16-bit timer/counters, two USARTs, and two TWI interfaces in a 44-pin VQFN. Choose ATXMEGA64D3-MN only when its reduced event-system resources are acceptable and the board has been checked against the D3 pin and peripheral configuration. Choose ATXMEGA32D4-MN when its 32 KB Flash ceiling comfortably accommodates application code, the 4 KB boot section, diagnostics, and update requirements. Do not make a replacement decision from package similarity alone: verify programming signals, exposed-pad layout, clock behavior, peripheral multiplexing, voltage conditions, and firmware dependencies against the manufacturer datasheet.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ATXMEGA64D3-MN ATXMEGA32D4-MN
Brand Microchip Technology Microchip Technology Microchip Technology
Package 44-pin VQFN (7 x 7 mm) 44-pin VQFN (7 x 7 mm) 44-pin VQFN (7 x 7 mm)
Flash Memory 64 KB 64 KB 32 KB
EEPROM Memory 2 KB 2 KB 2 KB
SRAM Memory 4 KB 4 KB 4 KB
Event System 4 channels Reduced event-system resources 4 channels

मुख्य विशेषताएँ

  • Full D4 event-system feature set (बनामATXMEGA64D3-MN)
  • Twice the Flash capacity of the lower-memory D4 candidate (बनामATXMEGA32D4-MN)
  • Hardware resources consolidated in a compact 44-pin package (बनामATXMEGA32D4-MN)

डिज़ाइन नोट्स

Use the manufacturer VQFN land pattern and pin-1 orientation exactly, then place the required supply capacitor close to the device power and ground pins. Preserve a short, low-impedance return path beneath the exposed pad and avoid routing high-speed or switching-current traces adjacent to sensitive clock and programming signals. The 7 x 7 mm package offers little routing margin, so complete pin assignment and layer changes before fabrication.

Design the 1.6 V to 3.6 V rail so it remains within operating limits during startup, load transients, and temperature extremes. Follow the manufacturer guidance for decoupling and external supply stability. If a nearby switching converter creates ripple, place the regulator's output filtering and the MCU's local bypass capacitor in the current path rather than relying only on bulk rail capacitance.

Assign the event-system, timer, USART, TWI, and programming signals with their alternate-function limitations in mind. Route the clock and programming interface away from noisy switching nodes, and ground unused inputs according to the manufacturer recommendations. Because the VQFN footprint leaves limited escape-routing space, verify every peripheral's pin-mux option before committing the schematic to a two-layer PCB.

Do not select ATXMEGA32D4-MN solely because its memory family and package appear similar. Its 32 KB Flash is 32 KB less than the ATXMEGA64D4-MN, which can break applications that include bootloader growth, diagnostic code, or field-update images. Likewise, review event-system behavior before using ATXMEGA64D3-MN. Review peripheral assignments, interrupts, boot space, and firmware dependencies for either candidate.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The device listing identifies a green 1.6 V to 3.6 V 44-pin QFN configuration, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is included in the technical records. Confirm current declarations with Microchip or the authorized channel before regulatory submission.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ATXMEGA64D4-MN datasheet ATXMEGA64D4-MN pinout ATXMEGA64D4-MN datasheet pdf ATXMEGA64D4-MN specifications ATXMEGA64D4-MN equivalent ATXMEGA64D4-MN replacement ATXMEGA64D4-MN cross reference ATXMEGA64D4-MN vs ATXMEGA64D3-MN ATXMEGA64D4-MN footprint ATXMEGA64D4-MN 32MHz 64KB Microchip ATXMEGA64D4-MN ATXMEGA64D4-MN price ATXMEGA64D4-MN stock ATXMEGA64D4-MN application circuit

संबंधित कंपोनेंट्स और शब्द

Microchip Technology ATXMEGA64D4-MN ATXMEGA64D4 ATXMEGA64D3-MN ATXMEGA32D4-MN AVR XMEGA microcontroller embedded processor 8/16-bit microcontroller AVR enhanced RISC architecture in-system programmable Flash read-while-write EEPROM SRAM four-channel event system programmable multilevel interrupt controller 16-bit timer/counter PWM USART TWI I2C 44-pin VQFN 7 x 7 mm surface-mount package low-power embedded control industrial sensor controller
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें