ATXMEGA64D4-MN - 32MHz 64KB AVR XMEGA MCU | Microchip
MPN: ATXMEGA64D4-MN ✓ AktifATXMEGA64D4-MN Genel Bakış
An AVR XMEGA microcontroller is an embedded-control device within the wider microcontroller, embedded-processing, and semiconductor hierarchy. XMEGA devices combine deterministic event handling with conventional interrupt processing and extensive serial connectivity. This makes them suitable for compact control systems that need more timing and communication resources than a basic 8-bit MCU without moving to a more complex general-purpose processor.
The ATXMEGA64D4-MN provides 64 KB of in-system-programmable Flash with read-while-write support and a 4 KB boot-code section. Its 2 KB EEPROM supports nonvolatile parameter storage, while 4 KB of SRAM accommodates working data and interrupt or communication buffers. The device operates from a 1.6 V to 3.6 V supply and is identified as an extended-temperature 105°C-qualified option in its product listing.
The four-channel event system lets multiple peripherals request actions without relying exclusively on central interrupt servicing. A 16-bit real-time counter and four flexible 16-bit timer/counters provide time measurement, timing control, compare outputs, and PWM generation. Two USARTs and two TWI interfaces support asynchronous serial links and addressable buses. The AVR enhanced RISC architecture provides the high-performance, low-power operation associated with the XMEGA family.
Typical applications include industrial sensor controllers, building and access-control equipment, compact motor-control modules, communication hubs, data-acquisition nodes, and low-power embedded instruments. The 44-pin VQFN format also supports dense PCB layouts where a reduced package size is important and adequate copper and thermal design are available.
When laying out the board, follow the manufacturer pin-description table and recommended VQFN land pattern. Pay particular attention to supply decoupling, clock stability, programming-interface access, exposed-pad thermal management, and the pin assignments of the event system and communication peripherals. Confirm the exact operating modes and peripheral connections in the manufacturer datasheet before finalizing the schematic.
This page combines the manufacturer's device characteristics with package-aware replacement guidance, application analysis, comparison parameters, and practical PCB design notes. It is intended to help engineers determine whether the ATXMEGA64D4-MN provides the required memory, timing, serial connectivity, package size, and operating range without overstating unverified cross-brand compatibility.
Drop-in alternatifler için ATXMEGA64D4-MN — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ATXMEGA64D4-MN (aynı form faktörü ve ayağa oturma) — farklı olan Package, EEPROM Memory, Flash Memory, Product Type, Timer/Counter Count.
ATXMEGA64D3-MN
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATXMEGA32D4-MN
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ATXMEGA64D4-MN Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Clock Frequency | 32 MHz |
| Program Flash Memory | 64 KB |
| Boot Loader Section | 4 KB |
| EEPROM Memory | 2 KB |
| SRAM Memory | 4 KB |
| General-Purpose I/O | 34 lines |
| Event System Channels | 4 channels |
| Real-Time Counter | 16-bit |
| Timer/Counter Count | 4 timers/counters at 16-bit resolution |
| USART Count | 2 serial interfaces |
| Two-Wire Interface Count | 2 serial interfaces |
| Supply Voltage Range | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105 °C |
| Paket | 44-pin VQFN, 7 x 7 mm |
| Montaj Türü | Surface mount |
| Flash Programming | In-system programmable with read-while-write |
ATXMEGA64D4-MN 44-pin vqfn, 7 x 7 mm Pin Yapısı Kılavuzu
ATXMEGA64D4-MN (44-pin vqfn, 7 x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: ATXMEGA64D4-MN.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ATXMEGA64D4-MN için uygundur 6 uygulamas: Industrial Sensor and Data-Acquisition Controller, Building Access and Security Control, Compact Motor and Actuator Control, Low-Power Communication Hub, Precision Timing and PWM Module, Embedded Instrumentation and Diagnostics.
Industrial Sensor and Data-Acquisition Controller
The ATXMEGA64D4-MN fits compact sensor nodes that must sample, condition data locally, and communicate over limited industrial links. Its 32 MHz AVR core provides useful processing headroom, while 64 KB of Flash accommodates application code and a 4 KB boot section, and 4 KB of SRAM supports working buffers. The four 16-bit timer/counters support accurate sampling intervals, and two USARTs or TWI interfaces can connect local sensors and a host. Its 1.6 V to 3.6 V range also simplifies low-voltage rail partitioning.
Önerilen
Building Access and Security Control
The ATXMEGA64D4-MN is suitable for access-control readers, lock controllers, and security modules that coordinate several real-time inputs. The four-channel event system can link peripheral events to deterministic actions, while four 16-bit timer/counters help manage timing, debounce, pulse checks, and motor or latch control. Two USARTs and two TWI interfaces provide options for reader peripherals, expansion modules, or secure communications. Its 64 KB Flash also allows room for protocol handling, diagnostics, and update-oriented bootloader code.
Önerilen
Compact Motor and Actuator Control
The ATXMEGA64D4-MN can coordinate timing-sensitive actuator functions in compact motor-control modules. Its four 16-bit timer/counters provide compare and PWM channels, while the four-channel event system helps synchronize peripheral actions without relying entirely on interrupt latency. The 32 MHz CPU handles direction logic, fault states, and communications, and 2 KB EEPROM can retain calibration or configuration values. An external driver, current protection, and appropriate transient handling remain necessary because the MCU is a controller rather than the motor power stage.
Önerilen
Low-Power Communication Hub
The ATXMEGA64D4-MN is well matched to protocol converters and small communication concentrators that must bridge several embedded interfaces. Two USARTs support asynchronous links, and two TWI interfaces provide addressable bus connectivity, allowing multiple protocols to coexist in one controller. The four-channel event system can coordinate data movement and peripheral events, while 4 KB of SRAM provides space for active buffers. Its 1.6 V minimum operating voltage supports low-voltage logic integration, subject to each external interface's level and timing requirements.
Önerilen
Precision Timing and PWM Module
The ATXMEGA64D4-MN suits modules requiring accurate repeated timing, pulse measurement, or configurable PWM outputs. Four 16-bit timer/counters divide the work among independent timing channels, and the 32 MHz CPU leaves processing capacity for measurement calculations, diagnostics, and communications. The four-channel event system improves coordination among timers, communication peripherals, and GPIO activity. At the same time, the 44-pin VQFN package saves board area, making the device useful for compact timing boards and multi-channel control modules.
Önerilen
Embedded Instrumentation and Diagnostics
The ATXMEGA64D4-MN can serve as the control core in compact instruments that combine measurement timing, local status reporting, and downloadable firmware. The 64 KB Flash provides space for measurement routines and communication protocols, while the 4 KB boot section supports a bootloader strategy. Two USARTs can connect a computer interface and a local sensor link, and the event system helps coordinate periodic sampling. Its extended-temperature listing is useful in demanding equipment, although the complete product still requires calibrated analog front ends and suitable enclosure design.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ATXMEGA64D4-MN — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ATXMEGA64D3-MN | ATXMEGA32D4-MN |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin VQFN (7 x 7 mm) | 44-pin VQFN (7 x 7 mm) | 44-pin VQFN (7 x 7 mm) |
| Flash Memory | 64 KB | 64 KB | 32 KB |
| EEPROM Memory | 2 KB | 2 KB | 2 KB |
| SRAM Memory | 4 KB | 4 KB | 4 KB |
| Event System | 4 channels | Reduced event-system resources | 4 channels |
Ana Farklılayıcılar
- Full D4 event-system feature set (karşılaştırma:ATXMEGA64D3-MN)
- Twice the Flash capacity of the lower-memory D4 candidate (karşılaştırma:ATXMEGA32D4-MN)
- Hardware resources consolidated in a compact 44-pin package (karşılaştırma:ATXMEGA32D4-MN)
Tasarım Notları
Use the manufacturer VQFN land pattern and pin-1 orientation exactly, then place the required supply capacitor close to the device power and ground pins. Preserve a short, low-impedance return path beneath the exposed pad and avoid routing high-speed or switching-current traces adjacent to sensitive clock and programming signals. The 7 x 7 mm package offers little routing margin, so complete pin assignment and layer changes before fabrication.
Design the 1.6 V to 3.6 V rail so it remains within operating limits during startup, load transients, and temperature extremes. Follow the manufacturer guidance for decoupling and external supply stability. If a nearby switching converter creates ripple, place the regulator's output filtering and the MCU's local bypass capacitor in the current path rather than relying only on bulk rail capacitance.
Assign the event-system, timer, USART, TWI, and programming signals with their alternate-function limitations in mind. Route the clock and programming interface away from noisy switching nodes, and ground unused inputs according to the manufacturer recommendations. Because the VQFN footprint leaves limited escape-routing space, verify every peripheral's pin-mux option before committing the schematic to a two-layer PCB.
Do not select ATXMEGA32D4-MN solely because its memory family and package appear similar. Its 32 KB Flash is 32 KB less than the ATXMEGA64D4-MN, which can break applications that include bootloader growth, diagnostic code, or field-update images. Likewise, review event-system behavior before using ATXMEGA64D3-MN. Review peripheral assignments, interrupts, boot space, and firmware dependencies for either candidate.
Uyumluluk Bilgisi
The device listing identifies a green 1.6 V to 3.6 V 44-pin QFN configuration, but no specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is included in the technical records. Confirm current declarations with Microchip or the authorized channel before regulatory submission.