Renesas Electronics

ISL83488IB - 3.3V 250kbps RS-485/RS-422 Transceiver | Renesas

MPN: ISL83488IB ✓ सक्रिय
3.3 V Vdss RS-485 and RS-422 Rds(on) 8-lead SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

ISL83488IB अवलोकन

The Renesas Electronics ISL83488IB is a 3.3V, 250kbps, full-duplex RS-485/RS-422 transceiver in an 8-lead SOIC package. It combines one differential driver and one differential receiver, allowing a balanced communication link to transmit and receive simultaneously through separate driver and receiver pins. Its 3.3V supply operation, BiCMOS implementation, and slew-rate-limited 250kbps data rate suit low-speed industrial, instrumentation, and point-to-point serial links.

An RS-485/RS-422 transceiver is an interface IC that converts logic-level signals into balanced differential signals for reliable communication over cables or PCB interconnects. RS-485 supports multipoint bus networks with driver-enable control, while RS-422 generally describes a point-to-point differential interface. The ISL83488 family supports both standards, and its full-duplex configuration avoids multiplexing the transmitter and receiver through a shared bus.

The primary operating characteristics are a 3.3V power supply, a maximum data rate of 250kbps, and one transmit and one receive channel in an 8-SOIC package. Slew-rate limiting reduces the high-frequency content of the driver output, which can help limit EMI and reflections on longer interconnects. The receiver converts the differential bus voltage into a single-ended logic output for the host controller.

Technically, the ISL83488 is a BiCMOS interface device optimized for low-power, 3.3V balanced communication. The ISL83488 and related ISL83490 devices use separate receive and transmit paths, while the ISL83488 configuration is intended for applications that do not require independent receiver and transmitter output-disable functions. Its 250kbps rate favors noise-limited data links over high-speed differential communication.

Typical uses include industrial control links, test and measurement systems, building automation equipment, point-to-point sensor interfaces, and embedded serial networks. The full-duplex arrangement is particularly useful where the master must receive a response while transmitting a command, or where a node communicates over a dedicated balanced pair rather than a shared multidrop bus.

PCB design should preserve the differential signal path, connect the transceiver ground reference close to the device, and provide controlled termination appropriate to the cable length and topology. Disable functions and bus direction control must be handled by the host circuitry when the selected family member does not provide dedicated enable pins. Confirm the exact pin assignments and termination strategy against the manufacturer datasheet before layout release.

This product record combines the device function, package and operating characteristics with practical interface-design guidance, verified replacement analysis, and an engineering-focused comparison of directly related ISL83488-family transceivers.

के लिए ड्रॉप-इन विकल्प ISL83488IB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ISL83488IB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type, Maximum Data Rate, Supported Standards.

Renesas Electronics
Package: 8-pin SOIC, 3.90 mm width
Product Type: RS-485/RS-422 differential transceiver
Maximum Data Rate: 10 Mbps
इसके साथ तुलना करें ISL83488IB →
Renesas Electronics
Package: 14-pin SOIC
Product Type: RS-485/RS-422 transceiver
इसके साथ तुलना करें ISL83488IB →

ISL83488IB-T

✅ ड्रॉप-इन
📦 8-SOIC
Same 3.3V, 250kbps, full-duplex RS-485/RS-422 function and 8-SOIC footprint; ordering suffix changes the delivery configuration

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ISL83490IB

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Renesas Electronics
📦 8-SOIC
RS-485/RS-422 differential transceiver · 3.3 V · 10 Mbps · Full duplex · 1 · 1 · RS-422 and RS-485 · 8-pin SOIC, 3.90 mm width

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ISL83491IB

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Renesas Electronics
📦 8-SOIC
RS-485/RS-422 transceiver · 3.3 V · 10 Mbps · 1/1 transceiver · Full duplex · RS-485, RS-422 · BiCMOS · Slew-rate-limited driver

कीमत के लिए संपर्क करें

डेटाशीट देखें →

ISL83488IBZ

✅ ड्रॉप-इन
📦 8-SOIC
Same 3.3V, 250kbps full-duplex RS-485/RS-422 device and 8-SOIC footprint; IBZ identifies a different order packing configuration

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ISL83488IB विशेषताएं

Product Type Full-duplex RS-485/RS-422 transceiver
सप्लाई वोल्टेज 3.3 V
Maximum Data Rate 250 kbps
Driver Configuration 1 transmitter
Receiver Configuration 1 receiver
Duplex Mode Full duplex
Supported Standards RS-485 and RS-422
Process Technology BiCMOS
Output Slew Rate Slew-rate limited
पैकेज 8-lead SOIC
पिन काउंट 8 pins
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान रेंज -40°C to +85°C
Automotive Qualification Not applicable; commercial interface IC

ISL83488IB 8-lead soic पिन कॉन्फ़िगरेशन गाइड

ISL83488IB (8-lead soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ISL83488IB के लिए 8-lead soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ISL83488IB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ISL83488IB के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Point-to-Point Control Links, RS-422 Sensor and Instrumentation Links, Building Automation and Environmental Control, Test and Measurement Data Acquisition, Embedded Serial Gateways, Balanced Communication in Portable Equipment.

🏭

Industrial Point-to-Point Control Links

The ISL83488IB fits dedicated controller-to-controller links where a 3.3V system needs simultaneous balanced transmission and reception at rates up to 250kbps. Its full-duplex arrangement keeps the driver and receiver on separate paths, avoiding direction multiplexing and simplifying request-response exchanges. The slew-rate-limited output also helps control high-frequency content on industrial cables. Designers should use the manufacturer application circuit for decoupling, differential routing, and termination, and should validate conducted and radiated emissions for the completed enclosure and cable configuration.

🔧

RS-422 Sensor and Instrumentation Links

The ISL83488IB is appropriate for RS-422 measurement systems that need a 3.3V, 250kbps differential data path and full-duplex operation. Separate transmit and receive channels allow the controller to command an instrument while simultaneously receiving measurement data. Because the interface is not isolated, applications requiring galvanic separation need external isolation and an appropriately designed isolated power path. Cable length, grounding strategy, and termination must be evaluated together to prevent loss of differential signaling.

🏠

Building Automation and Environmental Control

The ISL83488IB can connect low-speed building-control equipment over a dedicated balanced pair while operating from a 3.3V controller supply. A 250kbps slew-rate-limited link is suitable for command and status traffic, and full duplex permits simultaneous sensor reporting and actuator control. In a building network with multiple cable runs, keep each differential pair routed as a controlled impedance pair and apply termination only where required by the physical topology. Verify the operating temperature requirement against the intended installation environment.

📟

Test and Measurement Data Acquisition

The ISL83488IB supports bench and laboratory equipment that exchanges commands and results over a balanced serial connection. The 250kbps rate provides adequate throughput for many instrument-control protocols, while full-duplex operation removes the need to switch a shared transceiver direction. The 3.3V supply also simplifies integration with modern mixed-signal controllers. For high-accuracy analog measurement systems, keep the transceiver supply and digital return path separate from sensitive analog grounds where possible, and use controlled impedance routing between the IC and connector.

🖥️

Embedded Serial Gateways

The ISL83488IB is useful in an embedded gateway that must bridge a 3.3V host processor to a balanced industrial bus. Its single full-duplex channel supports simultaneous host commands and peripheral responses at up to 250kbps, while the slew-rate-limited driver favors controlled transitions over long interconnect paths. Firmware must manage protocol timing, fault detection, and bus state even though the family member does not require every output-disable function used by half-duplex alternatives. Protective circuitry should be selected separately for exposed cables.

📱

Balanced Communication in Portable Equipment

The ISL83488IB can support a compact 3.3V peripheral that communicates with a host through a short balanced cable. Its 8-SOIC package and full-duplex architecture permit separate receive and transmit connections, while the 250kbps rate is suitable for command, status, and low-volume sensor traffic. Portable products still need careful grounding because the interface is non-isolated. Keep the connector return close to the cable reference, route the differential pair as a pair, and evaluate ESD protection at the external interface without degrading signal integrity.

What is the ISL83488IB?
The ISL83488IB is a 3.3V, full-duplex, 250kbps BiCMOS transceiver supporting both RS-485 and RS-422 balanced communication. According to the Renesas ISL83488 product page, it combines one transmitter and one receiver with separate transmit and receive paths in an 8-lead SOIC package. The device is intended for low-power point-to-point and industrial balanced data links.
What is the operating voltage of ISL83488IB?
The ISL83488IB operates from a 3.3V supply. The Renesas product page identifies the device as a 3.3V-powered BiCMOS transceiver, while the manufacturer datasheet describes the ISL83488 family as 3.3V low-power RS-485/RS-422 devices. The interface should therefore be operated with a supply that satisfies the exact limits listed for the selected ordering code in the manufacturer datasheet.
What is the maximum data rate of ISL83488IB?
The ISL83488IB supports data rates up to 250kbps. Renesas describes it as a slew-rate-limited 250kbps transceiver, a rate intended for reliable low-to-moderate-speed balanced links. Slew-rate limitation reduces edge speed and high-frequency harmonics, making the device appropriate for cables and interconnects where lower EMI and controlled signal transitions are more important than maximum throughput.
Is ISL83488IB full duplex or half duplex?
The ISL83488IB is a full-duplex transceiver with separate receive and transmit paths. The manufacturer datasheet states that the ISL83488 and ISL83490 are configured for full-duplex applications using separate receiver inputs and transmitter outputs. This differs from half-duplex family members that multiplex the receive and transmit functions.
Where can I download the ISL83488IB datasheet PDF?
The manufacturer datasheet can be obtained from the Renesas ISL83488 product page or through the linked ISL83483, ISL83485, ISL83488, ISL83490, and ISL83491 datasheet PDF. Use the manufacturer datasheet for the final pin assignments, electrical limits, recommended application circuit, termination values, and ordering information associated with ISL83488IB.
Where can I find the ISL83488IB pinout?
The ISL83488IB pinout is shown in the pin-configuration section of the manufacturer datasheet for the ISL83483, ISL83485, ISL83488, ISL83490, and ISL83491 family. The exact ordering code uses an 8-lead SOIC package, but signal names and no-connect positions must be assigned from that table rather than inferred from other family members.
What is the best drop-in replacement for ISL83488IB?
The closest documented replacement is ISL83488IB-T because it retains the ISL83488 function, 8-SOIC package, 3.3V operation, full-duplex configuration, and 250kbps rate. The ordering suffix changes the delivery format rather than the core interface function. Review package orientation, pin configuration, operating limits, and lifecycle status before treating it as a production substitute.
Can ISL83488IB-T replace ISL83488IB?
Yes, ISL83488IB-T is a documented same-family option that can serve as a drop-in replacement when its delivery format is acceptable. It is an 8-SOIC, 3.3V, full-duplex RS-485/RS-422 transceiver rated at 250kbps. Confirm the ordering-code differences and manufacturing requirements because the IB-T suffix denotes a distinct packaging configuration.
What can replace ISL83488IB?
ISL83488IB-T is the most direct documented replacement because it preserves the 3.3V supply, 250kbps slew-rate-limited interface, full-duplex architecture, and 8-SOIC footprint. The manufacturer datasheet also documents closely related ISL83490 and ISL83491 devices, but their enable and pin configurations must be compared carefully before they are treated as replacements.
IS ISL83488IB the same as ISL83488IBZ?
The ISL83488IB and ISL83488IBZ share the same ISL83488 device family and 8-SOIC interface format, but their ordering suffixes represent different delivery configurations. The ISL83488IBZ listing is identified as a 3.3V, 250kbps full-duplex RS-485/RS-422 transceiver. Verify the exact suffix, packing method, and order quantities before substitution.
ISL83488IB vs ISL83490IB - which is better for an RS-422 link?
ISL83488IB and ISL83490IB are closely related 3.3V, 250kbps, full-duplex BiCMOS transceivers in 8-lead packages. ISL83488 is the general choice when the design does not require the particular control arrangement associated with ISL83490. Compare the manufacturer pin-description and electrical tables before selection because differences in enable behavior can affect host-controller interfacing.
When should I choose ISL83488IB over a half-duplex RS-485 transceiver?
Choose ISL83488IB when simultaneous transmission and reception are required and the design can allocate separate driver and receiver connections. Its full-duplex architecture avoids sharing the bus through direction-control multiplexing, which simplifies simultaneous request-and-response communication. A half-duplex transceiver may be preferable only when wiring count, bus sharing, or cost takes priority over full-duplex operation.
Is ISL83488IB suitable for industrial equipment?
The ISL83488IB is suitable for many industrial balanced-communication applications because it operates from 3.3V, supports a 250kbps slew-rate-limited data rate, and provides a separate full-duplex transmit and receive path. Its stated operating temperature range is -40°C to +85°C. Final suitability should also be checked for isolation, surge protection, emissions, and system-level regulatory requirements.
How should ISL83488IB be terminated for an RS-485 or RS-422 link?
Termination should be selected from the cable length, data rate, topology, and differential impedance rather than applied uniformly to every node. The manufacturer application circuit provides the starting point for supply decoupling, driver and receiver connections, and termination. For RS-422 point-to-point links, terminate the far end of each twisted pair; for RS-485 buses, follow the topology-specific guidance in the datasheet.
Where can I buy ISL83488IB and what is its lead time?
Use the Request a Quote form on this page to request ISL83488IB pricing, current stock, minimum order quantity, and production lead time. The part is offered in an 8-SOIC package and is supported by a manufacturer product page. A current lead-time commitment should be obtained before scheduling production or building a constrained bill of materials.
What is the price of ISL83488IB?
Use the Request a Quote form on this page for the current ISL83488IB unit price and quantity breaks. Market pricing can change with availability, order quantity, and lifecycle status, so confirm the quote directly before purchasing. The structured offer shown on this page is updated independently from the technical product description.
Is ISL83488IB in stock?
Current ISL83488IB inventory should be confirmed through the Request a Quote form on this page. The manufacturer lists the ISL83488 family as an active 3.3V, 250kbps full-duplex transceiver, and multiple distributor records exist for the ordering code. Request the exact suffix, delivery format, quantity, and ship date needed for your build.

के लिए इंजीनियरिंग संदर्भ डेटा ISL83488IB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ISL83488IB when a 3.3V system requires a dedicated, full-duplex RS-485 or RS-422 link operating at up to 250kbps. Its separate transmit and receive paths simplify simultaneous command and response traffic without direction multiplexing. ISL83488IB-T is the closest documented same-family alternative when its delivery format is suitable, while ISL83488IBZ represents another ordering configuration of the core device family. ISL83490IB and ISL83491IB are useful alternatives for designs that can use their respective control arrangements, but their pin and enable behavior must be checked against the ISL83488IB before substitution. For a shared multidrop bus where only one node drives at a time, a half-duplex member may reduce wiring; for a point-to-point link or simultaneous request-response channel, the ISL83488IB full-duplex configuration is the clearer choice. In every case, preserve the balanced pair layout, follow the manufacturer termination guidance, and evaluate external protection and isolation requirements for the cable environment.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ISL83488IB-T ISL83490IB ISL83491IB ISL83488IBZ
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V 3.3 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps
Duplex Mode Full duplex Full duplex Full duplex Full duplex Full duplex
Transmitter Count 1 1 1 1 1
Receiver Count 1 1 1 1 1
Supported Standards RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422
Process Technology BiCMOS BiCMOS BiCMOS BiCMOS BiCMOS

मुख्य विशेषताएँ

  • Direct full-duplex architecture without half-duplex multiplexing (बनामISL83485IBZ)
  • 3.3V operation supports direct integration with low-voltage controllers (बनामISL83490IB)
  • Documented same-family ordering option with identical core interface (बनामISL83488IB-T)

डिज़ाइन नोट्स

Route each differential pair as a tightly coupled, controlled-impedance pair from the transceiver to the connector. Keep the two conductors over a continuous reference plane, minimize stub branches, and avoid crossing digital return-current paths on adjacent layers. Place the device close to the interface connector so transient-energy and common-mode currents do not traverse sensitive logic areas.

Place the manufacturer's recommended supply and bypass capacitors immediately across the device power and ground pins. Keep the high-frequency return current within the capacitor connection loop and avoid routing driver-return currents through the receiver reference path. This separation is particularly important because the transceiver combines a switching-edge output stage with a differential input that responds to small signal imbalances.

Do not assume that a family member with the same 8-SOIC outline is electrically interchangeable. ISL83488, ISL83490, and ISL83491 can differ in enable or output-disable behavior, so compare the pin-description table, driver and receiver disable timing, and electrical limits before substitution. Also verify the ordering suffix and delivery configuration to avoid receiving an unexpected package format.

Use the 250kbps slew-rate-limited output for the intended balanced link and retain the manufacturer's recommended termination arrangement. Proper common-mode behavior depends on cable balance, connector grounding, and stub control; termination alone cannot correct a poor ground reference. Validate the finished system for emissions and ESD immunity because the transceiver itself does not provide galvanic isolation.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The device is a commercial RS-485/RS-422 interface IC rather than an automotive-qualified component. Exact RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the current manufacturer product documentation or declaration.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ISL83488IB datasheet ISL83488IB datasheet pdf ISL83488IB pinout ISL83488IB specifications Renesas ISL83488IB ISL83488IB equivalent ISL83488IB replacement ISL83488IB vs ISL83490IB ISL83488IB price ISL83488IB stock ISL83488 8-SOIC transceiver 3.3V 250kbps RS-422 transceiver ISL83488IB industrial link ISL83488IB application circuit

संबंधित कंपोनेंट्स और शब्द

Renesas Electronics Intersil ISL83488IB ISL83488IB-T ISL83488IBZ ISL83490IB ISL83491IB RS-485 transceiver RS-422 transceiver full-duplex transceiver balanced differential interface interface IC BiCMOS 3.3V power supply 250kbps data rate slew-rate-limited driver 8-SOIC surface mount industrial control instrumentation balanced data link RS-485 standard RS-422 standard
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें