Renesas Electronics

ISL83491IB - 3.3V 10Mbps RS-485/RS-422 Transceiver | Renesas

MPN: ISL83491IB ✓ सक्रिय
3.3 V Vdss RS-485, RS-422 Rds(on) 14-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

ISL83491IB अवलोकन

Renesas Electronics ISL83491IB is a 3.3V, low-power, single-channel RS-485/RS-422 transceiver with integrated driver and receiver in a 14-pin SOIC package. The device supports full-duplex balanced communication and is specified for operation up to 10 Mbps, making it suitable for industrial control links, instrumentation, and communication equipment. Its BiCMOS architecture is designed to combine low supply current with controlled driver slew rate, helping reduce electromagnetic interference and ringing on transmitted signals. The manufacturer describes the ISL83491 family as meeting both RS-485 and RS-422 communication requirements.

An RS-485/RS-422 transceiver is an interface IC that converts between digital logic-level signals and balanced differential lines. RS-422 is commonly associated with point-to-point, full-duplex links, while RS-485 supports multipoint buses with an enable-controlled driver. The ISL83491IB combines these functions in one device and includes separate transmit and receive control in its interface arrangement. This makes it useful when a system needs flexible line-driver enable control, galvanic distance between noisy equipment, and communication over cables longer or more exposed than ordinary TTL interconnects.

The ISL83491IB is identified as a 3.3V device. The verified manufacturer product-page result identifies the family as a 3.3V, full-duplex, 10 Mbps RS-485/RS-422 transceiver with enable, while distributor records identify ISL83491IB as a 14-SOIC device. The part uses a BiCMOS implementation and a slew-rate-limited driver according to the family description. These features are significant in systems where transmitted edge rate, bus reflections, and power consumption need to be balanced rather than optimized only for maximum throughput.

Typical uses include industrial sensor and actuator networks, factory automation equipment, building-control systems, test and measurement instruments, and embedded communication modules. The 3.3V supply operation integrates directly with modern microcontroller and digital-logic rails. Designers should still verify the complete electrical limits, receiver thresholds, driver timing, and recommended external components in the manufacturer datasheet before releasing a production design.

This page combines the manufacturer family description with the available distributor records for ISL83491IB and provides practical guidance for package selection, enable control, cabling, and PCB implementation. The ISL83491IB is intended for designers who need a compact, low-power, high-speed balanced-interface solution rather than a general-purpose TTL transceiver.

A key design consideration is preserving the intended RS-485/RS-422 topology. Driver enable polarity, termination placement, common-mode behavior, and connector grounding must be checked against the system wiring. The 10 Mbps capability does not remove the need for controlled-impedance cabling, proper topology, and correct termination strategy.

के लिए ड्रॉप-इन विकल्प ISL83491IB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं ISL83491IB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type.

Renesas Electronics
Package: 8-lead SOIC
Product Type: Full-duplex RS-485/RS-422 transceiver
इसके साथ तुलना करें ISL83491IB →

ISL83491IB-T

✅ ड्रॉप-इन
📦 14-pin SOIC
Same 3.3V, 10 Mbps RS-485/RS-422 family and 14-pin SOIC footprint; -T is a distinct ordering designation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ISL83491IBZ-T

✅ ड्रॉप-इन
📦 14-pin SOIC
Same 14-pin SOIC RS-485/RS-422 family with 3.3V operation and 10 Mbps target; suffix and ordering details differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ISL83491IBZ

✅ ड्रॉप-इन
📦 14-pin SOIC
Same 3.3V, 10 Mbps RS-485/RS-422 family and 14-pin SOIC package; ordering suffix differs

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

ISL83491IB विशेषताएं

Product Type RS-485/RS-422 transceiver
सप्लाई वोल्टेज 3.3 V
डेटा दर 10 Mbps
Channel Configuration 1/1 transceiver
Duplex Mode Full duplex
Communication Standards RS-485, RS-422
Architecture BiCMOS
Driver Type Slew-rate-limited driver
Enable Control Yes
पैकेज 14-pin SOIC
माउंटिंग प्रकार Surface mount

ISL83491IB 14-pin soic पिन कॉन्फ़िगरेशन गाइड

ISL83491IB (14-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

ISL83491IB के लिए 14-pin soic पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: ISL83491IB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

ISL83491IB के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Networks, Factory Automation Controllers, Building Control Systems, Test and Measurement Instruments, Embedded Communication Modules, LED Lighting Control.

🏭

Industrial Sensor Networks

The ISL83491IB suits industrial sensor and actuator networks that need a balanced differential interface on a 3.3V logic rail. Its RS-485 and RS-422 support provides noise-resistant communication over cables, while the family’s slew-rate-limited driver helps reduce ringing and radiated emissions. With a full-duplex 1/1 arrangement and data-rate capability up to 10 Mbps, it can support equipment clusters where reliable line signaling and controlled transitions are important. The design should preserve the intended bus topology, enable state, grounding arrangement, and termination strategy.

🏭

Factory Automation Controllers

The ISL83491IB can connect a 3.3V controller to RS-485 or RS-422 equipment in factory automation systems. The 10 Mbps capability accommodates higher-rate links, while the slew-rate-limited driver helps contain electromagnetic interference on factory cabling. Its 14-pin SOIC package supports compact controller boards, and the full-duplex transceiver arrangement allows transmit and receive paths to operate independently when the wiring supports that topology. Engineers should validate surge protection, common-mode range, and cable length against the completed industrial system.

🏠

Building Control Systems

The ISL83491IB is appropriate for building-control equipment that distributes commands and sensor data over balanced RS-485 links. The 3.3V supply operation fits compact embedded control boards, and the controlled driver slew rate is useful in installations where cables run near power and communications wiring. Its full-duplex operation supports dedicated differential point-to-point links, while RS-485 compatibility enables bus-oriented networks. Proper grounding, termination, protection, and separation between communications and power conductors remain essential for dependable field operation.

🔧

Test and Measurement Instruments

The ISL83491IB can provide the balanced communication link between a 3.3V instrument controller and external RS-485 or RS-422 equipment. Its data-rate capability up to 10 Mbps supports communication with remote modules and test systems, while the slew-rate-limited driver helps reduce unwanted signal energy on instrument cabling. The compact 14-pin SOIC package preserves board area for analog and measurement circuitry. For sensitive instruments, designers should check noise behavior, grounding, isolation requirements, and connector return paths before finalizing the layout.

🌐

Embedded Communication Modules

The ISL83491IB is useful in embedded communication modules that bridge a 3.3V processor or controller to RS-485 and RS-422 equipment. The full-duplex 1/1 transceiver architecture supports independent communication paths, and the 10 Mbps specification provides margin for high-speed control and data traffic. Its surface-mount 14-pin SOIC package is practical for compact modules, while the controlled edge rate helps improve EMC behavior on external cables. Firmware and hardware designers should coordinate driver-enable timing with bus turnaround and fault-recovery requirements.

💡

LED Lighting Control

The ISL83491IB can support distributed LED-lighting controllers that exchange commands over balanced RS-485 or RS-422 wiring. Operating from 3.3V, it fits low-power control electronics, and the controlled driver slew rate helps limit electromagnetic interference in installations containing long cable runs. The full-duplex architecture can support dedicated communication paths between a master controller and lighting nodes, subject to the selected wiring topology. Because LED systems may combine power and communications conductors, designers should verify grounding, protection, and isolation to prevent fault propagation.

What is the Renesas ISL83491IB?
The Renesas ISL83491IB is a 3.3V, single-channel RS-485/RS-422 transceiver with a full-duplex configuration and a maximum data rate of 10 Mbps. According to the Renesas product-page description, the ISL83491 family uses a BiCMOS implementation and includes a slew-rate-limited driver. The ISL83491IB is supplied in a 14-pin SOIC package, making it appropriate for compact industrial and embedded communication equipment.
What are the key specifications of ISL83491IB that engineers should know?
The ISL83491IB operates from 3.3V, supports RS-485 and RS-422 balanced communication, provides a 1/1 transceiver arrangement, and is rated for up to 10 Mbps operation. The manufacturer describes the device as full duplex with enable control and uses a BiCMOS architecture. It is packaged in a 14-pin SOIC. The controlled driver slew rate is especially relevant when reducing cable ringing and electromagnetic interference.
What is the operating voltage of ISL83491IB?
The ISL83491IB is a 3.3V transceiver. The verified manufacturer result identifies the ISL83491 family as a 3.3V, full-duplex, 10 Mbps RS-485/RS-422 transceiver with enable. Because the part is intended for modern digital systems, it can be used with compatible 3.3V logic systems after checking the complete supply-voltage limits and interface thresholds in the manufacturer datasheet.
Where to download the ISL83491IB datasheet PDF?
The ISL83491IB datasheet is available through the Renesas ISL83491 product-details page at https://www.renesas.com/en/products/isl83491/part-details/isl83491ibz-t. The linked page identifies the family as a 3.3V, full-duplex, 10 Mbps RS-485/RS-422 transceiver with enable. Use the manufacturer datasheet for the authoritative pin description, electrical characteristics, timing information, and recommended application circuit.
Where can I find the ISL83491IB pinout?
The ISL83491 pinout should be taken from the pin-description table in the Renesas ISL83491 datasheet. The manufacturer product page provides access to the family documentation, while distributor records identify ISL83491IB as a 14-SOIC device. Use the package drawing and pin table together when assigning balanced-line inputs, outputs, enable controls, ground, and supply connections.
Is ISL83491IB suitable for industrial communication equipment?
The ISL83491IB is suitable for many industrial communication applications because it supports RS-485 and RS-422 balanced links, operation up to 10 Mbps, a 3.3V supply, and a slew-rate-limited driver. These features help support reliable cable-based data transfer while limiting unwanted signal transitions. The final equipment design must still verify temperature limits, isolation strategy, surge protection, grounding, and connector requirements.
What is the difference between ISL83491IB and ISL83491IB-T?
The ISL83491IB and ISL83491IB-T are both Renesas 14-SOIC ISL83491-family RS-485/RS-422 transceivers. The distributor records identify the same 1/1, full-duplex, 3.3V, 10 Mbps device family and indicate that IB-T is a separate orderable designation, commonly associated with the manufacturer’s tape-and-reel ordering convention. Confirm the exact package, temperature, and shipping details on the manufacturer datasheet before substitution.
When should I choose ISL83491IB over another RS-485 transceiver?
Choose ISL83491IB when the design needs a 3.3V, full-duplex RS-485/RS-422 interface with enable control, a data rate up to 10 Mbps, and a 14-pin SOIC footprint. It is particularly attractive when a controlled slew rate is preferred to limit EMI and cable reflections. Compare the complete input thresholds, output timing, supply limits, temperature range, and package details before making a final choice.
Can ISL83491IB be used in an RS-422 point-to-point link?
Yes. The Renesas ISL83491 family is specified for both RS-485 and RS-422 balanced communication, and the ISL83491IB is a full-duplex transceiver. It can therefore support an RS-422 point-to-point arrangement when the system wiring, enable state, termination, and grounding match the device requirements. Verify the exact receiver and driver pin functions in the datasheet before PCB release.
How does the slew-rate-limited driver help in an RS-485 design?
A slew-rate-limited driver reduces the speed of signal transitions, which can reduce high-frequency EMI and ringing on transmission lines. The ISL83491 family description identifies this driver characteristic as a differentiator. It is useful in industrial cables and longer interconnect paths where abrupt edges can excite reflections, although layout, topology, and termination remain essential to achieve reliable communication.
What is the best drop-in replacement for ISL83491IB?
The closest documented Renesas-family choices are ISL83491IB-T and ISL83491IBZ-T, both identified as 14-pin SOIC versions of the same 3.3V, full-duplex RS-485/RS-422 transceiver family. Their exact pin compatibility and parameter equivalence must be confirmed against the manufacturer datasheet and the individual orderable-device documentation. A true drop-in replacement should match package, pin functions, supply range, timing, and enable polarity.
Is ISL83491IB the same as ISL83491IBZ?
The ISL83491IB and ISL83491IBZ are closely related Renesas orderable devices in the same ISL83491 family, and comparison listings explicitly discuss their differences. Both are associated with 3.3V RS-485/RS-422 transceiver operation, but the suffix can indicate differences in package or ordering details. Do not treat the alternate suffix as automatically interchangeable; confirm the exact pinout, package, and electrical specifications before replacing ISL83491IB.
What is the price of ISL83491IB?
The current commercial price and available quantity should be obtained through the Request a Quote form on this page. The available distributor listing shows a reference unit-price indication for the exact ISL83491IB, but the platform does not present that indication as a fixed quantity-break quotation. Use the quote form for current pricing, availability, lead time, and shipment configuration.
Where to buy ISL83491IB online?
The ISL83491IB can be requested through the Request a Quote form on this page. The form is the appropriate route for current unit pricing, quantity breaks, stock confirmation, lead time, and shipping details. The verified distributor records identify the exact ISL83491IB as a Renesas 14-SOIC transceiver and separately list related ISL83491IB-T inventory, but availability changes over time.
What is the lead time for ISL83491IB?
Lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. The manufacturer lists the ISL83491IBZ-T family device as active, and distributor records show listings for the exact ISL83491IB, but those records do not establish a fixed current lead time. A current quotation can confirm allocation, shipment quantity, and delivery timing for the required package configuration.
Is ISL83491IB in stock?
Current stock status for ISL83491IB should be checked through the Request a Quote form on this page. The available distributor results contain product listings and an in-stock indication, but inventory is time-sensitive and can vary by package, quantity, and shipment configuration. The quote form provides the appropriate mechanism for confirming current allocation and delivery availability.
What is the best Renesas equivalent for ISL83491IB?
The best documented same-brand starting points are ISL83491IB-T and ISL83491IBZ-T, which are identified in comparison and distributor records as 14-pin SOIC members of the same 3.3V RS-485/RS-422 transceiver family. A valid drop-in choice must preserve the 14-pin footprint, balanced-line pin assignments, enable polarity, 3.3V supply operation, and 10 Mbps timing target. Verify those points in the manufacturer documentation before production use.

के लिए इंजीनियरिंग संदर्भ डेटा ISL83491IB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the ISL83491IB for a 3.3V, full-duplex RS-485/RS-422 interface in a 14-pin SOIC design that may operate up to 10 Mbps. It is particularly useful when controlled driver edges are preferred to reduce EMI and cable ringing. ISL83491IB-T is the first related choice to evaluate when the required ordering or shipment designation differs, provided the manufacturer documentation confirms the same pinout and electrical limits. ISL83491IBZ-T and ISL83491IBZ are also closely related family members, but suffix differences must be checked rather than assumed away. For a drop-in substitution, verify package dimensions, pin functions, enable polarity, receiver thresholds, driver timing, supply range, and temperature grade before PCB release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद ISL83491IB-T ISL83491IBZ-T ISL83491IBZ
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 14-pin SOIC 14-pin SOIC 14-pin SOIC 14-pin SOIC
Product Type 1/1 transceiver 1/1 transceiver RS-485/RS-422 transceiver RS-485/RS-422 transceiver
Supply Voltage 3.3 V 3.3 V 3.3 V 3.3 V
Data Rate 10 Mbps 10 Mbps 10 Mbps 10 Mbps
Supported Standards RS-485, RS-422 RS-485, RS-422 RS-485, RS-422 RS-485, RS-422
Duplex Mode Full duplex Full duplex Full duplex Full duplex
Driver Architecture Slew-rate-limited BiCMOS driver Slew-rate-limited BiCMOS driver Slew-rate-limited BiCMOS driver Slew-rate-limited BiCMOS driver
Ordering Suffix IB IB-T IBZ-T IBZ

मुख्य विशेषताएँ

  • Full-duplex balanced-interface operation (बनामISL83491IB-T)
  • 10 Mbps family capability with controlled driver edges (बनामISL83491IBZ-T)
  • Exact ISL83491 family configuration with enable (बनामISL83491IBZ)

डिज़ाइन नोट्स

Place the transceiver and its protection components close to the connector so that differential traces remain short and symmetric. Route the two conductors of each balanced pair together, avoid stubs, and maintain consistent spacing between pairs. The controlled slew rate of the ISL83491 family helps reduce reflections, but it does not compensate for an incorrect topology or poor trace geometry.

Do not assume every ISL83491 suffix is automatically interchangeable. Confirm the 14-pin pin assignments, enable polarity, receiver thresholds, supply limits, temperature grade, and ordering interpretation for the exact device being substituted. The ISL83491IB, ISL83491IB-T, ISL83491IBZ-T, and ISL83491IBZ labels appear in related listings, but production approval should be based on the manufacturer documentation for the selected MPN.

For RS-485 buses, use a termination strategy appropriate to the cable length and topology, and place termination only where signal reflections require it. For RS-422 point-to-point links, follow the receiver and driver recommendations in the datasheet. Keep the enable function controlled during reset and startup so the driver does not contend with another transmitter on the bus.

The slew-rate-limited driver can reduce radiated emissions, but cable EMI still depends on connector shielding, cable type, grounding, and common-mode margins. Keep switching power and high-current return paths away from the balanced pair, use a solid ground reference, and evaluate the finished cable interface with the intended equipment. External surge protection should be selected to suit the installation environment.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance status requires confirmation from the exact orderable-device documentation. The manufacturer lists the ISL83491 family device as active, but the available records do not provide a complete compliance statement for ISL83491IB.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

ISL83491IB datasheet ISL83491IB pinout ISL83491IB datasheet pdf ISL83491IB equivalent ISL83491IB replacement ISL83491IB cross reference ISL83491IB vs ISL83491IB-T ISL83491IB footprint ISL83491IB price ISL83491IB stock Renesas ISL83491IB ISL83491 14-SOIC pinout ISL83491 application circuit 3.3V 10Mbps RS-485 transceiver

संबंधित कंपोनेंट्स और शब्द

Renesas Electronics ISL83491IB ISL83491IB-T ISL83491IBZ-T ISL83491IBZ RS-485 RS-422 transceiver interface IC balanced differential line BiCMOS slew-rate-limited driver full duplex 3.3V power supply 10 Mbps data rate 14-pin SOIC SOIC package family surface mount SMD industrial communication factory automation building control test and measurement enable control electromagnetic interference
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें