Texas Instruments

LM2903BQDRQ1 - Dual Rail-to-Rail Comparator | Texas Instruments

MPN: LM2903BQDRQ1 ✓ सक्रिय
±18 V or 36 V total Vdss SOIC (D), 8 pins Package
न्यूनतम ऑर्डर मात्रा: 1 |

LM2903BQDRQ1 अवलोकन

Texas Instruments LM2903BQDRQ1 is an automotive dual differential comparator with two open-collector outputs, rail-to-rail input operation, and a supply range of ±18 V or 36 V total. It is packaged in an 8-pin SOIC (D) and rated for operation from -40 °C to +125 °C. The device is identified by Texas Instruments as an AEC-Q100 automotive-grade option within the LM2903B-Q1 family.

A comparator is an analog signal-processing IC that compares two input voltages and produces a digital output indicating which input is higher. Comparators belong to the broader amplifier IC category and are commonly used as threshold detectors, sensor interfaces, overvoltage monitors, and control-loop decision elements. Unlike a general-purpose operational amplifier, the LM2903BQDRQ1 is intended primarily for open-loop voltage comparison rather than precision closed-loop amplification.

The primary features of the LM2903BQDRQ1 are its dual differential input architecture, open-collector output stage, rail-to-rail input capability, and broad supply-voltage range. The open-collector outputs require an external pull-up resistor, allowing the output state to be set by the external pull-up voltage. This arrangement is useful when interfacing with automotive logic, transistor-based level conversion, relay drivers, or multiple devices sharing a wired bus. Its -40 °C to +125 °C temperature range supports applications across industrial, automotive, and other extended-temperature environments.

The LM2903B-Q1 family is described by Texas Instruments as a next-generation version of the industry-standard LM2903-Q1 comparator family. Its stated improvements include lower offset voltage, higher supply-voltage capability, lower supply current, lower input bias current, lower propagation delay, and improved 2 kV ESD performance, together with drop-in replacement convenience. The target MPN combines these automotive-grade features in the 8-SOIC package identified by ordering code D.

Typical uses include battery-pack threshold detection, automotive sensor conditioning, overvoltage and undervoltage protection, industrial control inputs, window or level monitoring, and logic-level translation. In each case, the two comparator channels can monitor independent thresholds or operate as complementary detectors. The open-collector architecture also permits a system designer to select the pull-up voltage and current rather than being restricted to a fixed push-pull output voltage.

When laying out a board, place the pull-up resistor close to the open-collector output and keep comparator input traces short to reduce susceptibility to injected noise. Confirm output-current limits, input common-mode behavior, supply sequencing, and logic thresholds in the manufacturer datasheet before finalizing the design. Consider a device with push-pull outputs when an external pull-up is undesirable, or verify an alternate comparator carefully when its output architecture or input range differs.

This page combines the manufacturer’s automotive comparator information, verified ordering details, and practical drop-in guidance. It helps engineers identify the correct package, temperature grade, output type, and replacement options while emphasizing the electrical checks that matter during schematic and PCB design.

के लिए ड्रॉप-इन विकल्प LM2903BQDRQ1 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM2903BQDRQ1 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Number of Channels, Output Type, Automotive Qualification, Input Bias Current.

Texas Instruments
Package: 8-pin SOIC (D)
Input Bias Current: 3.5 nA
इसके साथ तुलना करें LM2903BQDRQ1 →
Texas Instruments
Package: 8-pin SOIC
Number of Channels: 2
Output Type: Open collector
इसके साथ तुलना करें LM2903BQDRQ1 →

LM2903DR

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 channels · 2 V to 36 V · Open-collector · 300 ns · 8-pin SOIC · Surface mount · -40 °C to +125 °C

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2903BIDR

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 channels · Open-collector · 36 V · 2 V · 0.37 mV · 3.5 nA · 200 µA per comparator

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2903BIDRQ1

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SOIC-8
Same LM2903 family and 8-SOIC footprint; primary distinction is the Q1 automotive ordering grade rather than a package change.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LM2903QDRQ1

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Texas Instruments
📦 SOIC-8
Dual differential comparator · 2 · AEC-Q100 Grade 0 and Grade 1 · 2 V to 36 V · Total supply difference of 2 V to 36 V · 0.4 mA per comparator · 2 mV typical · 25 nA typical

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM2903BQDR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 SOIC-8
Same LM2903B-Q1 electrical family and 8-SOIC footprint; automotive qualification and ordering-grade suffix are the principal distinctions.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LM2903BQDRQ1 Maximum Ratings और Electrical Characteristics

Comparator Type Dual differential comparator
Number of Channels 2 channels
आउटपुट प्रकार Open-collector
Input Common-Mode Range Rail-to-rail
Supply Voltage Range ±18 V or 36 V total
पैकेज SOIC (D), 8 pins
ऑपरेटिंग तापमान रेंज -40 °C to +125 °C
Automotive Qualification AEC-Q100
Output Pull-Up Requirement External pull-up resistor required
Improved ESD Performance 2 kV
माउंटिंग प्रकार Surface mount

LM2903BQDRQ1 soic (d), 8 pins पिन कॉन्फ़िगरेशन गाइड

LM2903BQDRQ1 (soic (d), 8 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

LM2903BQDRQ1 के लिए soic (d), 8 pins पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LM2903BQDRQ1.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LM2903BQDRQ1 के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Battery Threshold Detection, Overvoltage and Undervoltage Protection, Industrial Sensor Interfacing, Automotive Sensor and Actuator Conditioning, Relay and Solenoid Drive Logic, Logic Level Translation.

🚗

Automotive Battery Threshold Detection

The LM2903BQDRQ1 fits automotive battery-pack monitoring because it combines differential inputs, open-collector outputs, and operation across -40 °C to +125 °C. Place one channel across a divided battery voltage and the other across a precise reference to detect overvoltage or undervoltage conditions. Its external pull-up can be tied to the vehicle logic supply, while the wide ±18 V or 36 V total supply capability supports protected industrial-style sensing paths. Because the output is open collector, multiple detection nodes can be combined where appropriate. Confirm input overvoltage protection and transient performance in the final power-distribution network.

⚡

Overvoltage and Undervoltage Protection

The LM2903BQDRQ1 can implement independent protection decisions by comparing divided supply voltages against a reference. Its dual-channel architecture allows one section to monitor an upper limit while the other monitors a lower limit, reducing the number of discrete comparator assemblies required. The open-collector outputs support direct interface to an enable, shutdown, or fault input through an external pull-up. The LM2903B-Q1 generation is described as offering lower offset voltage and lower propagation delay than the earlier LM2903 family, which are useful traits in protection systems. Validate threshold accuracy, response time, and output-current limits against the system thresholds.

🏭

Industrial Sensor Interfacing

The LM2903BQDRQ1 is useful for converting analog sensor conditions into discrete control decisions. A resistive divider can translate a sensor output into the differential input range, and the comparator then generates an open-collector event when the sensing threshold is crossed. Rail-to-rail input operation helps the design use much of the available signal range, while the -40 °C to +125 °C rating supports extended-temperature industrial equipment. Choose the pull-up voltage to match the controller domain and size the resistor for the required rise time. Sensor hysteresis or filtering should be added where electrical noise could cause repeated threshold transitions.

🚙

Automotive Sensor and Actuator Conditioning

The LM2903BQDRQ1 supports threshold decisions around automotive sensors, switches, and actuator feedback loops. Its dual differential inputs permit comparison against a local reference, and the open-collector output can pull down a control line or drive a subsequent transistor stage. The automotive LM2903B-Q1 positioning, AEC-Q100 identification, and extended temperature range make it appropriate for electronics located near harsh vehicle environments. Ensure the surrounding divider, reference, and protection components also meet their respective automotive requirements. The comparator should sit behind appropriate transient protection when connected to external wiring.

🔧

Relay and Solenoid Drive Logic

The LM2903BQDRQ1 can create a low-side relay or solenoid control signal by comparing a command voltage with a threshold and using the open-collector output to drive an external transistor. This arrangement prevents the comparator from carrying the full actuator current and lets the pull-up voltage match the control logic. Differential inputs are valuable when the command is referenced to a remote or offset signal node. The LM2903B-Q1 family’s stated improvements in propagation delay and input bias current support responsive threshold decisions. Include transistor base current, flyback protection, and contactor-specific voltage ratings in the complete driver design.

💡

Logic Level Translation

The LM2903BQDRQ1 can translate between voltage domains by using its open-collector output with a pull-up to the destination logic voltage. When the input comparator detects the appropriate logic state, it releases the pulled-up line or pulls it down, allowing a higher-voltage or lower-voltage domain to be read by the receiving circuit. This arrangement is particularly useful because the output-high level is set by the external resistor rather than a fixed internal voltage. Keep the pull-up current within the output rating and check the destination receiver’s thresholds. Input and output absolute-maximum limits must also be checked for every translated voltage.

अनुशंसित उत्पादों का सारांश

LM2903BQDR Same-family SOIC-8 comparator alternative उपयोग में: Automotive Battery Threshold Detection, Industrial Sensor Interfacing, Logic Level Translation LM2903QDRQ1 Texas Instruments उपयोग में: Automotive Battery Threshold Detection, Automotive Sensor and Actuator Conditioning, Logic Level Translation LM2903DR Texas Instruments उपयोग में: Overvoltage and Undervoltage Protection, Automotive Sensor and Actuator Conditioning LM2903BIDR Texas Instruments उपयोग में: Overvoltage and Undervoltage Protection, Relay and Solenoid Drive Logic LM2903BIDRQ1 Same-family SOIC-8 comparator alternative उपयोग में: Industrial Sensor Interfacing, Relay and Solenoid Drive Logic
What is the LM2903BQDRQ1?
The LM2903BQDRQ1 is a Texas Instruments automotive dual differential comparator with two open-collector outputs, rail-to-rail inputs, and an 8-pin SOIC package. According to the Texas Instruments LM2903B-Q1 manufacturer datasheet, it accepts ±18 V or 36 V total supply voltage and operates from -40 °C to +125 °C. Each channel compares its two inputs and provides a logic-level indication through an open-collector output.
What are the key specifications of LM2903BQDRQ1 that engineers should know?
The LM2903BQDRQ1 combines two differential comparator channels, open-collector outputs, rail-to-rail input operation, and a ±18 V or 36 V total supply range. According to the Texas Instruments LM2903B-Q1 manufacturer datasheet, its -40 °C to +125 °C rating and AEC-Q100 identification suit automotive and extended-temperature designs. The device uses ordering code D for an 8-pin SOIC package.
Where can I download the LM2903BQDRQ1 datasheet PDF?
The official LM2903B-Q1 datasheet is available through the Texas Instruments product page and the linked manufacturer datasheet at ti.com/lit/gpn/lm2903b-Q1. That document defines the LM2903B-Q1 family, including LM2903BQDRQ1, and provides the authoritative pin descriptions, electrical characteristics, timing information, and application guidance. Use the ordering-information table to confirm that suffix QDRQ1 identifies the 8-pin SOIC automotive-grade configuration.
Where can I find the LM2903BQDRQ1 pinout?
Use the pin-description table and package drawing in the Texas Instruments LM2903B-Q1 manufacturer datasheet for the authoritative LM2903BQDRQ1 pinout. The part is ordered in an 8-pin SOIC (D) package, so its outline matches the SOIC-8 footprint represented on this page. Confirm signal names against the datasheet before assigning PCB tracks, particularly the power pins, input pins, and open-collector outputs.
Can LM2903BQDRQ1 operate from a single 5 V supply?
The LM2903BQDRQ1 can be powered from a single supply when that supply falls within the manufacturer-specified operating limits, although the verified ordering information highlights its capability for ±18 V or 36 V total operation. According to the Texas Instruments LM2903B-Q1 manufacturer datasheet, the actual single-supply limits and input common-mode range must be confirmed before use. Rail-to-rail inputs do not by themselves permit operation outside the stated supply ratings.
Why does the LM2903BQDRQ1 output need a pull-up resistor?
Each LM2903BQDRQ1 output uses an open-collector transistor that pulls the output toward ground but does not actively drive it high. An external pull-up resistor connects the output to a suitable positive voltage, allowing the logic-high level to match the surrounding system. According to the Texas Instruments LM2903B-Q1 manufacturer datasheet, the resistor value must satisfy the output-current, rise-time, and power-dissipation requirements of the application.
Is LM2903BQDRQ1 suitable for automotive applications?
The LM2903BQDRQ1 is suitable for qualifying automotive applications because Texas Instruments identifies the LM2903B-Q1 as an AEC-Q100 automotive dual differential comparator family. Its ordering entry specifies operation from -40 °C to +125 °C in an 8-pin SOIC package. The complete automotive design still requires system-level validation, including transient immunity, EMC, production traceability, and use of components qualified for their specific stress conditions.
What is the best drop-in replacement for LM2903BQDRQ1?
The closest documented drop-in replacement is LM2903DR, which shares the 8-SOIC package, pinout, and electrical characteristics with LM2903BQDRQ1 in most cases. The same-family LM2903BIDR is also identified as pin-for-pin compatible in a manufacturer forum discussion. Confirm supply rating, temperature grade, offset voltage, timing, and output behavior against the current datasheet before replacing an automotive-qualified assembly.
Can LM2903BIDR replace LM2903BQDRQ1?
LM2903BIDR can be considered a pin-for-pin SOIC-8 alternative, but it is not an automatic automotive-qualified substitute for LM2903BQDRQ1. The documented cross-reference identifies the pin compatibility, while the ordering grades and qualification requirements differ. According to the Texas Instruments LM2903B-Q1 manufacturer datasheet, verify operating temperature, qualification status, key timing parameters, and production requirements before approving a substitution.
What can replace LM2903BQDRQ1 on the same PCB?
LM2903DR is the primary same-PCB replacement because it is explicitly described as sharing the 8-SOIC package, pinout, and electrical characteristics with LM2903BQDRQ1 in most cases. LM2903BIDR is another same-family SOIC-8 option identified as pin-for-pin compatible. Neither assumption removes the need to compare voltage ratings, propagation delay, offset, supply current, temperature range, and qualification for the finished design.
Is LM2903BQDRQ1 the same as LM2903DR?
LM2903BQDRQ1 and LM2903DR are not identical ordering codes, although the documented cross-reference describes LM2903DR as a drop-in replacement in most cases because both use the same 8-SOIC package and pinout. The principal distinctions include the automotive LM2903B-Q1 family positioning and operating-grade requirements. According to Texas Instruments documentation, verify all temperature and qualification requirements before treating the parts as equivalent.
When should I choose LM2903BQDRQ1 over LM2903DR?
Choose LM2903BQDRQ1 when the design requires the automotive LM2903B-Q1 family positioning, the stated -40 °C to +125 °C operating range, and AEC-Q100 identification. LM2903DR may be preferable for a non-automotive design when its current ratings, timing, temperature coverage, and lifecycle status meet the system requirements. The decision should be based on qualification and verified electrical limits rather than package similarity alone.
Is LM2903BQDRQ1 suitable for battery and power-system monitoring?
The LM2903BQDRQ1 is suitable for battery and power-system threshold monitoring because it combines differential inputs, rail-to-rail input operation, open-collector outputs, and a wide supply range. According to the Texas Instruments LM2903B-Q1 manufacturer datasheet, the LM2903B generation offers lower offset voltage and lower supply current than the earlier LM2903 family. The exact thresholds, response time, and fault behavior still require circuit-level verification.
Where can I buy LM2903BQDRQ1 online?
Use the Request a Quote form on this page to request LM2903BQDRQ1 availability, order quantity, and current commercial terms for the exact 8-pin SOIC ordering code. The part is listed by Texas Instruments as an automotive dual differential comparator and appears in current distributor catalogs. Quote requests avoid presenting potentially stale commercial information as a fixed commitment and let the order be checked against the requested quantity.
What is the price of LM2903BQDRQ1?
The current commercial price for LM2903BQDRQ1 should be requested through the Request a Quote form on this page using the exact MPN and required quantity. Pricing can vary with order quantity, package, lead time, and supply status, so a representative number may not reflect the final order terms. The form is the appropriate route for a current quotation tied to your production requirements.
What is the lead time for LM2903BQDRQ1?
Request the current LM2903BQDRQ1 lead time through the Request a Quote form on this page, stating your required quantity and production schedule. Texas Instruments lists LM2903BQDRQ1 as an active automotive dual differential comparator in an 8-pin SOIC package, but current manufacturing and distribution timing must be confirmed for the exact order. Include a requested delivery date in the quote request to make the response actionable.
Is LM2903BQDRQ1 in stock?
Check the current LM2903BQDRQ1 inventory status through the Request a Quote form on this page and provide the quantity required for your build. Current distributor listings identify the part, but catalog presence alone does not confirm a firm stock allocation for a specific quantity. The quote response should confirm availability, schedule, and the exact LM2903BQDRQ1 ordering code being allocated.
What is the best cross-brand equivalent for LM2903BQDRQ1?
No cross-brand drop-in equivalent can be confirmed from the available manufacturer and cross-reference information without risking an unverified pinout or output-architecture mismatch. LM2903DR and LM2903BIDR are same-manufacturer, same-family alternatives with documented SOIC-8 compatibility. Before approving any other manufacturer’s device, verify the 8-SOIC pin mapping, open-collector output, supply range, rail-to-rail input behavior, timing, and automotive qualification requirements.

के लिए इंजीनियरिंग संदर्भ डेटा LM2903BQDRQ1 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose LM2903BQDRQ1 when the design is automotive or extended-temperature and needs an AEC-Q100 dual open-collector comparator in an 8-SOIC package. Its rail-to-rail inputs, differential sensing, wide supply capability, and external-pull-up output suit battery monitoring, protection, and threshold-detection circuits. Choose LM2903DR when a non-automotive design needs the same footprint and a documented drop-in relationship, provided its current temperature, timing, and lifecycle requirements are acceptable. Choose LM2903BIDR for a same-family SOIC-8 alternative after checking qualification. LM2903QDRQ1 is useful when the earlier LM2903-Q1 performance generation is sufficient, but LM2903B-Q1 provides stated improvements in offset, current, delay, and ESD behavior. No cross-brand option is recommended without a separate pinout and electrical qualification review.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LM2903DR LM2903BIDR LM2903BIDRQ1 LM2903QDRQ1 LM2903BQDR
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Comparator Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Output Type Open-collector Open-collector Open-collector Open-collector Open-collector Open-collector
Automotive Qualification AEC-Q100 Not stated for this ordering code Not stated for this ordering code Q1 ordering family Q1 ordering family Non-Q1 ordering suffix
Family Generation LM2903B-Q1 with lower offset, supply current, bias current, propagation delay, and improved 2 kV ESD performance LM2903 family LM2903B family LM2903B-Q1 family LM2903-Q1 family LM2903B-Q1 family

मुख्य विशेषताएँ

  • Automotive LM2903B-Q1 family positioning (बनामLM2903QDRQ1)
  • Documented drop-in package compatibility (बनामLM2903DR)
  • Extended-temperature automotive specification (बनामLM2903BIDR)

डिज़ाइन नोट्स

Do not treat the open-collector output as a push-pull logic output. Add a pull-up resistor to the required logic rail and confirm that its maximum current, rise time, and power dissipation are acceptable. If a redesign removes the resistor, the output will remain unable to source current in the high state. Also check whether downstream circuitry requires wired-AND behavior or isolated high-side signaling before reusing this topology.

Place the pull-up resistor close to the LM2903BQDRQ1 output pin to limit the trace length carrying the rising edge. Keep differential input traces short, route them away from switching nodes, and connect the ground return directly to the device ground pin. If the comparator monitors a remote or high-voltage node, place divider and protection components near the connector and provide a defined low-impedance return path to minimize differential pickup.

Add controlled hysteresis around the comparison threshold when slow input transitions or output noise could cause repeated switching. Positive feedback can provide hysteresis, but the resistor network must preserve the available differential input range. Verify offset and propagation delay at the actual temperature and supply voltage, and do not rely solely on nominal values when the decision affects protection, braking, or another safety-relevant function.

Decouple the comparator supply with a local ceramic capacitor and place it adjacent to the supply and ground pins. Keep the supply return current away from sensitive input and output-return paths. When using single-supply operation, confirm that the comparator inputs, outputs, and pull-up rail remain within the datasheet limits under startup, shutdown, and transient conditions; rail-to-rail input wording does not override absolute-maximum ratings.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Texas Instruments identifies LM2903B-Q1 as an automotive family and the LM2903BQDRQ1 ordering entry as AEC-Q100. Other compliance declarations are not stated in the cited product information.

डेटा सत्यापन तिथि: 2026-11-09 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LM2903BQDRQ1 datasheet LM2903BQDRQ1 datasheet pdf LM2903BQDRQ1 pinout LM2903BQDRQ1 equivalent LM2903BQDRQ1 replacement LM2903BQDRQ1 cross reference LM2903BQDRQ1 vs LM2903DR LM2903BQDRQ1 footprint LM2903BQDRQ1 price LM2903BQDRQ1 stock Texas Instruments LM2903BQDRQ1 LM2903BQDRQ1 automotive comparator LM2903BQDRQ1 open collector output LM2903BQDRQ1 SOIC-8 pinout LM2903BQDRQ1 battery threshold detection

संबंधित कंपोनेंट्स और शब्द

Texas Instruments LM2903BQDRQ1 LM2903DR LM2903BIDR LM2903BIDRQ1 LM2903QDRQ1 LM2903BQDR dual differential comparator comparator amplifier IC analog signal-processing IC open-collector output rail-to-rail input differential input external pull-up resistor threshold detector overvoltage protection undervoltage protection battery monitoring SOIC-8 SOIC package family surface-mount package AEC-Q100 2 kV ESD automotive electronics
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें