Texas Instruments

LM324M/NOPB - Quad 32V 1MHz Op Amp | Texas Instruments

MPN: LM324M/NOPB ✓ सक्रिय
32 V Vdss SOIC (D) Package Internally compensated Speed
न्यूनतम ऑर्डर मात्रा: 1 |

LM324M/NOPB अवलोकन

The Texas Instruments LM324M/NOPB is a four-circuit, general-purpose operational amplifier designed for single-supply operation, with a nominal 32 V maximum supply rating, 1 MHz gain-bandwidth product, and a 14-pin SOIC package. The device combines four amplifiers in one package and is intended for conventional low-cost analog signal-conditioning applications.

An operational amplifier, or op amp, is a voltage-controlled differential amplifier whose high open-loop gain enables closed-loop functions such as buffering, amplification, summing, comparison, filtering, and differential signal conversion. The LM324 belongs to the broader operational-amplifier hierarchy within analog and mixed-signal semiconductors. Its four-amplifier configuration reduces package count and board area when several independent amplifier stages are required in the same circuit.

The LM324M/NOPB is identified by Texas Instruments as a low-power quad operational amplifier. Its four amplifier circuits provide a 1 MHz gain-bandwidth product, while the 32 V supply rating supports higher-voltage industrial and instrumentation systems than typical low-voltage rail-to-rail amplifiers. The 14-pin SOIC (D) package is a conventional surface-mount package, and the specified 0 °C to 70 °C temperature range targets commercial operating conditions.

The LM324 family is designed to operate from either a single supply or split supplies. Internal frequency compensation allows stable operation in common noninverting, inverting, voltage-follower, summing, and amplifier configurations without an external compensation network. Its general-purpose architecture is appropriate for transducer amplifiers, DC gain blocks, sensors, audio circuitry, and conventional control loops where moderate bandwidth and broad supply flexibility are more important than rail-to-rail input or output operation.

Typical applications include four-channel sensor conditioning, low-frequency active filters, audio preamplifier stages, current-loop interfaces, instrumentation buffers, and general-purpose analog boards. Because all four channels share one package, decoupling requirements and ground-return design should be evaluated for the complete circuit rather than for each amplifier independently.

When laying out a board, place power and ground connections to minimize loop area and avoid routing sensitive input traces close to high-current outputs. The SOIC footprint leaves more separation between pins than a compact leadless package, which can simplify prototype assembly, inspection, and rework. Confirm the exact circuit limits, output-swing behavior, input common-mode range, and stability requirements against the manufacturer datasheet for the intended supply voltage and load.

This product record combines the manufacturer’s 32 V, 1 MHz, 14-SOIC and 0 °C to 70 °C identification with same-package alternatives, application guidance, design notes, and a parameter-oriented comparison for engineers evaluating quad general-purpose op amps in SOIC-14 designs.

के लिए ड्रॉप-इन विकल्प LM324M/NOPB — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LM324M/NOPB (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Amplifier Type, Operating Temperature Range, Compensation, Package, Package Type.

Texas Instruments
Amplifier Type: General Purpose
Compensation: Internal frequency compensation
Package Type: 14-SOIC, 0.154 inch (3.90 mm) width
Texas Instruments
Amplifier Type: Standard (General Purpose)
Operating Temperature Range: 0°C to 70°C
Compensation: Internally frequency compensated for unity gain
STMicroelectronics
Amplifier Type: General Purpose
Operating Temperature Range: 0°C to +70°C
Package: SOIC-14
Texas Instruments
Compensation: Internally frequency compensated
Package: 14-pin SOIC
Texas Instruments
Amplifier Type: Standard (General Purpose) operational amplifier
Operating Temperature Range: 0°C to 70°C
Package Type: 14-SOIC

LM324MX/NOPB

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-14
Standard (General Purpose) operational amplifier · 4 channels · 4 circuits · 14-SOIC · 14 pins · Surface mount · 0°C to 70°C

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM324AM/NOPB

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-14
4 circuits · General Purpose · Four independent, high-gain, internally frequency-compensated amplifiers · 1 MHz · 0.5 V/us · 3 V to 32 V · Single supply · Bipolar

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM324AMX/NOPB

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-14
Standard (General Purpose) · 4 circuits · 3 V to 32 V · 1 MHz · 100 dB · Internally frequency compensated for unity gain · Includes ground · 0 V to VCC - 1.5 V

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM324DT

✅ ड्रॉप-इन
STMicroelectronics
📦 SOIC-14
4 · 3 V to 32 V · ±1.5 V to ±16 V · 700 µA typical · 2 mV typical · 20 nA typical · 1.3 MHz typical · 0.4 V/µs typical

✗ स्टॉक में नहीं

$0.0827 / यूनिट

डेटाशीट देखें →

LM324M

✅ ड्रॉप-इन
Texas Instruments
📦 SOIC-14
Quad operational amplifier · 4 circuits · Four independent amplifiers · Internally frequency compensated · Single-supply operation across a wide voltage range · Standard general-purpose amplifier · Instrumentation, signal amplification, and buffering · 14-pin SOIC

कीमत के लिए संपर्क करें

डेटाशीट देखें →

LM324M/NOPB Maximum Ratings और Electrical Characteristics

Product Type Quad operational amplifier
Amplifier Circuit Count 4 circuits
Product Classification Standard general-purpose amplifier
Maximum Supply Voltage 32 V
Gain-Bandwidth Product 1 MHz
Supply Configuration Single or split supply
ऑपरेटिंग तापमान रेंज 0 °C to 70 °C
Package Type SOIC (D)
पिन काउंट 14 pins
माउंटिंग प्रकार Surface mount
Frequency Compensation Internally compensated
Power Class Low power
Channel Architecture Four independent amplifiers

LM324M/NOPB soic (d) पिन कॉन्फ़िगरेशन गाइड

LM324M/NOPB (soic (d) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

LM324M/NOPB के लिए soic (d) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LM324M/NOPB.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LM324M/NOPB के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Sensor Signal Conditioning, Audio Preamplifier Stages, Active Filters and Control Loops, Data Acquisition Buffering, Power Supply Current Monitoring, IoT Sensor Interface Board.

🏭

Industrial Sensor Signal Conditioning

The LM324M/NOPB is well suited to conditioning four low-frequency sensor signals in a 14-pin SOIC package. Its four internally compensated amplifier channels can implement non-inverting, inverting, differential, or buffering stages without adding external compensation components. The 32 V maximum supply rating provides more headroom than low-voltage rail-to-rail devices, while the 1 MHz gain-bandwidth product is appropriate for sensors such as temperature, pressure, and resistive bridges. Design the input network so each signal remains inside the amplifier’s common-mode range, and check offset and bias current against the measurement accuracy before fixing the gain.

🎧

Audio Preamplifier Stages

The LM324M/NOPB can implement four low-frequency audio preamplifier or mixing stages because each internally compensated channel provides approximately 1 MHz gain-bandwidth product. Its 32 V maximum supply rating is useful for higher-voltage analog systems, while the general-purpose architecture suits microphone, line-level, and active-filter blocks that do not require rail-to-rail swing. Keep the gain structure compatible with the 1 MHz bandwidth class and observe the output-swing and loading limits from the manufacturer datasheet. Decoupling should be placed close to the package to prevent power-supply noise from entering all four amplified channels simultaneously.

⚡

Active Filters and Control Loops

The LM324M/NOPB provides four channels for low-frequency active filters, integrators, PID-style control loops, and error amplifiers. The 1 MHz gain-bandwidth product supports applications well below megahertz signal rates, while internal frequency compensation simplifies conventional closed-loop design. The 32 V class supply rating accommodates industrial control rails, and the four-channel package reduces component count. Select resistor and capacitor values around the desired closed-loop bandwidth and noise corner, and verify stability at the actual load capacitance and output-current conditions before releasing the design.

🖥️

Data Acquisition Buffering

The LM324M/NOPB is useful for buffering multiple inputs toward an analog-to-digital converter or measurement front end when modest bandwidth is sufficient. Four buffered channels can isolate source impedances, scale bipolar signals, or implement simple differential-to-single-ended conversion. Its 1 MHz gain-bandwidth product is normally ample for slow sensor or control signals, and the 32 V maximum supply class is useful where the acquisition section operates above low-voltage logic rails. Check common-mode limits, input offset, output swing, and capacitive loading, because source impedance and ADC sample timing can otherwise affect accuracy.

🔋

Power Supply Current Monitoring

The LM324M/NOPB can form low-side current-monitoring, voltage-amplification, or thresholding circuits in a 32 V class supply environment. Its general-purpose amplifiers can be combined as a difference stage, current-to-voltage buffer, or gain amplifier around a shunt or sensor. The 1 MHz class bandwidth is sufficient for many power-control feedback paths, while four channels allow monitoring, filtering, and auxiliary functions to share one package. Ensure the shunt and amplifier input remain within the common-mode range, and use the package’s ground and supply pins to prevent measurement error from shared return-current drops.

🧩

IoT Sensor Interface Board

The LM324M/NOPB fits a compact IoT sensor interface where several low-bandwidth analog channels must be conditioned before digital conversion. A single 14-pin SOIC can provide four gain or buffer stages, reducing board area compared with separate single amplifiers. Its 32 V maximum supply rating broadens compatibility with industrial sensor inputs, and the 1 MHz bandwidth class is suitable for slow environmental and status signals rather than high-speed communications. Keep sensitive sensor traces short and isolated from switching supplies, and account for the amplifier’s input offset, bias current, and common-mode behavior when setting the measurement resolution.

What are the key specifications of LM324M/NOPB that engineers should know?
The LM324M/NOPB is a four-amplifier general-purpose operational amplifier with a 32 V maximum supply rating, 1 MHz gain-bandwidth product, 14-pin SOIC package, and 0 °C to 70 °C operating range. Texas Instruments describes the LM324 family as a low-power quad operational amplifier intended for single-supply operation across a wide voltage range. It is suitable for conventional noninverting, inverting, buffering, summing, and gain-stage circuits where a compact multi-amplifier package is useful.
Where can I download the LM324M/NOPB datasheet PDF?
The LM324M/NOPB datasheet is available through Texas Instruments’ LM324 family product page and the exact part-details page. The manufacturer identifies the device as a quad 32 V, 1 MHz operational amplifier in a 14-pin SOIC (D) package. Use the manufacturer PDF for the complete pin description, electrical limits, typical-performance curves, power-supply recommendations, and package drawings rather than relying on a distributor summary.
Where can I find the LM324M pinout?
The LM324M pinout is documented in the LM324 manufacturer datasheet and its 14-pin SOIC package drawing. The LM324M/NOPB contains four operational-amplifier channels in a 14-pin SOIC (D) package. Assign each amplifier’s inputs, output, supply, and ground connections from the pin-description table in the datasheet, and use the manufacturer’s numbering diagram when creating or checking the PCB footprint.
What is the LM324M/NOPB used for?
The LM324M/NOPB is used for general-purpose analog signal conditioning, including sensor amplification, active filtering, buffering, summing, audio signal conditioning, and DC gain stages. Its four internal amplifier channels allow several low-bandwidth functions to be implemented in one 14-pin SOIC. Texas Instruments specifically identifies the LM324 family for transducer amplifiers, DC gain blocks, and conventional operational-amplifier circuits.
Can LM324M/NOPB operate from a single supply?
Yes, the LM324M/NOPB is designed for single power-supply operation and can also operate from split supplies. The manufacturer identifies a maximum nominal supply rating of 32 V and describes the LM324 as a low-power quad amplifier for a wide supply-voltage range. Check the datasheet’s input common-mode and output-swing limits for the selected supply because single-supply operation does not make the input and output rails independent.
What is the difference between LM324M/NOPB and LM324M?
LM324M/NOPB and LM324M identify closely related ordering configurations for the same Texas Instruments quad operational-amplifier family and 14-pin SOIC format. The manufacturer listing describes both as a low-power general-purpose quad amplifier, while the NOPB ordering code identifies the specified part variant. Confirm the exact suffix, grade, and ordering information on the manufacturer page before treating them as identical procurement lines.
Is LM324M/NOPB suitable for industrial applications?
The LM324M/NOPB is suitable for commercial-grade analog designs requiring a 32 V maximum supply rating and 1 MHz gain-bandwidth product, but its specified operating temperature range is 0 °C to 70 °C. For systems operating outside that range, select a grade with the required temperature qualification. The 14-pin SOIC package is also convenient for conventional surface-mount industrial control and instrumentation boards.
What can replace LM324M/NOPB?
LM324M/NOPB can be replaced by a pin-compatible quad general-purpose operational amplifier in the same 14-pin SOIC footprint when its electrical limits meet the circuit requirements. Compatible LM324-family orderable variants are the closest choices, while competitor equivalents should be checked for supply range, common-mode range, output swing, stability, input bias current, and exact pin arrangement. A footprint match alone does not guarantee equivalent behavior.
What is the best drop-in replacement for LM324M/NOPB?
The best drop-in replacement is a 14-pin SOIC LM324-family variant with the same four-channel architecture and compatible supply, input, output, and compensation characteristics. TI’s LM324 family page identifies the LM324B as able to replace earlier LM324 versions. Select the exact orderable suffix and confirm its electrical ratings against the original circuit before production use.
When should I choose LM324M/NOPB over another quad op amp?
Choose LM324M/NOPB when the design needs four general-purpose amplifiers, a nominal 32 V maximum supply, approximately 1 MHz gain-bandwidth product, and a 14-pin SOIC footprint. Prefer a rail-to-rail amplifier when inputs or outputs must operate close to the supply rails, and prefer a precision or low-noise device when offset, bias current, or noise dominates the measurement. The LM324 is strongest where cost, simplicity, and multi-amplifier consolidation matter.
Is LM324M/NOPB suitable for sensor signal conditioning?
Yes, the LM324M/NOPB is suitable for many low-frequency sensor signal-conditioning applications, especially when several amplifier channels are needed. Texas Instruments lists transducer amplifiers and DC gain blocks as LM324 use cases. Verify the sensor output range against the input common-mode limits, confirm that offset and bias current meet the required accuracy, and check output loading before selecting the external feedback network.
Where can I buy LM324M/NOPB online?
Use the “Request a Quote” form on this page to request LM324M/NOPB availability, current commercial terms, and lead time. The part is a standard 14-pin SOIC quad operational amplifier from Texas Instruments, with a 32 V maximum supply rating and 1 MHz gain-bandwidth product. Include your required quantity, date code, and packaging preference in the request so the quote can reflect the intended production build.
What is the price of LM324M/NOPB?
The current commercial price for LM324M/NOPB is available through the “Request a Quote” form on this page. Pricing can change with quantity, inventory, date code, and supply conditions, so request a quotation rather than relying on a historical listing. Provide the required order quantity and packaging preference so the response reflects the correct production configuration.
Is LM324M/NOPB in stock and what is its lead time?
Current LM324M/NOPB inventory and lead time should be requested through the “Request a Quote” form on this page. The part is listed by Texas Instruments as a 14-pin SOIC quad operational amplifier with a 32 V maximum supply rating and 1 MHz gain-bandwidth product. State the required quantity, schedule, and acceptable date-code window in the request to obtain a practical delivery commitment.
How should LM324M/NOPB be decoupled and laid out?
Connect the LM324M/NOPB power pins to a low-impedance supply and ground plane, and place the required bypass capacitors close to the device pins with minimal loop area. Route each noninverting input away from output and supply-current paths to reduce oscillation and offset errors. Because four amplifiers share one package, evaluate the aggregate supply-current path and return-current routing for the complete board rather than each channel independently.

के लिए इंजीनियरिंग संदर्भ डेटा LM324M/NOPB — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose LM324M/NOPB for conventional low-frequency analog designs that require four general-purpose amplifiers, a nominal 32 V maximum supply rating, approximately 1 MHz gain-bandwidth product, and a 14-pin SOIC footprint. It is particularly useful for sensor conditioning, active filtering, audio preamplification, buffering, and DC gain stages where the inputs and outputs can operate inside the amplifier’s common-mode and swing limits. Select LM324MX/NOPB, LM324AM/NOPB, LM324AMX/NOPB, or LM324DT when the required ordering grade or device variant provides a better fit for offset, temperature, or lifecycle requirements. Choose a rail-to-rail amplifier when signals must approach the supply rails, a precision amplifier when offset and bias current dominate, or a low-noise amplifier for high-resolution audio and instrumentation. For any substitution, verify the exact 14-pin SOIC pinout, supply limits, common-mode range, output swing, stability, and load capability rather than relying on package similarity alone.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LM324MX/NOPB LM324AM/NOPB LM324AMX/NOPB LM324DT LM324M
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14 SOIC-14
Amplifier Circuit Count 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Maximum Supply Voltage 32 V 32 V class 32 V class 32 V class 32 V class 32 V class
Gain-Bandwidth Product 1 MHz 1 MHz class 1 MHz class 1 MHz class 1 MHz class 1 MHz class
Supply Configuration Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply Single or split supply
Compensation Internally frequency compensated Internally frequency compensated Internally frequency compensated Internally frequency compensated Internally frequency compensated Internally frequency compensated
Power Class Low power Low power Low power Low power Low power Low power
Primary Function General-purpose amplifier General-purpose amplifier General-purpose amplifier General-purpose amplifier General-purpose amplifier General-purpose amplifier

मुख्य विशेषताएँ

  • Four amplifiers are consolidated in one 14-pin SOIC (बनामLM324DT)
  • Broad supply capability for general-purpose analog systems (बनामLM324AM/NOPB)
  • Single-supply and split-supply operating flexibility (बनामLM324MX/NOPB)
  • Multi-amplifier consolidation reduces board-level part count (बनामLM324M)

डिज़ाइन नोट्स

Place the required supply-bypass capacitors immediately adjacent to the LM324M/NOPB power and ground pins, and use the shortest practical connection between each capacitor and the package. Because all four amplifiers share the same supply pins, verify that the common trace and exposed board copper can carry the aggregate channel current without producing excessive voltage drop or ground bounce. Sensitive noninverting-input traces should run away from output and supply-current paths.

Do not assume that a nominal 32 V maximum supply rating makes every operating point valid. Check the datasheet limits for total supply voltage, input common-mode range, output swing, input common-mode differential limits, and output-current behavior at the selected supply. Single-supply operation also means the usable input and output range remains constrained even though the four channels can share one package.

Keep each noninverting input close to its source and provide a local return path for input bias current. Where a high-impedance sensor drives the amplifier, stray capacitance can change frequency response, and output loading can cause unexpected gain or stability behavior. Check closed-loop bandwidth using the selected feedback network and verify output stability with the actual cable, sensor, or downstream input capacitance before production.

Estimated: using the manufacturer-identified maximum supply rating of 32 V, a 5 V output, and a 20 mA load gives approximate regulator dissipation of (32 V - 5 V) × 0.020 A = 0.54 W. Actual dissipation is lower when the operating supply is closer to 5 V. Use the actual minimum input, output, load, and ambient temperature to evaluate SOIC copper dissipation and any required thermal margin.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The 0 °C to 70 °C commercial temperature range and general-purpose amplifier classification do not establish AEC-Q100 qualification. Compliance status requires confirmation from the manufacturer’s current product documentation.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

lm324m nopb lm324m datasheet lm324m pinout lm324m datasheet pdf lm324m pdf lm324m nopb equivalent lm324m nopb replacement lm324m nopb drop in replacement lm324m nopb soic 14 lm324m nopb price lm324m nopb stock texas instruments lm324m nopb

संबंधित कंपोनेंट्स और शब्द

Texas Instruments LM324M/NOPB LM324MX/NOPB LM324AM/NOPB LM324AMX/NOPB LM324DT LM324M operational amplifier op amp quad operational amplifier general-purpose amplifier analog signal conditioning DC gain block transducer amplifier single-supply operation split-supply operation gain-bandwidth product 1 MHz 32 V SOIC-14 SOIC package family surface mount SMD internal frequency compensation sensor conditioning
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें