ROHM Semiconductor

LMR932F-GE2 - Dual 1.4MHz Low-Power Op Amp | ROHM

MPN: LMR932F-GE2 ✓ सक्रिय
1.8 V to 5 V Vdss 35 nA Id 8-SOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

LMR932F-GE2 अवलोकन

The ROHM Semiconductor LMR932F-GE2 is a dual low-power operational amplifier with a 1.4 MHz gain-bandwidth product, a 0.35 V/µs slew rate, and a 1.8 V to 5 V supply-voltage range, housed in an 8-pin SOP package. Its rail-to-rail output and input/output full-swing architecture make it suitable for low-voltage signal conditioning, sensor interfaces, audio paths, and portable equipment.

An operational amplifier, or op amp, is a high-gain analog building block that compares two input voltages and drives an output according to their difference. Within the power-management and signal-processing hierarchy, the LMR932F belongs to the operational-amplifier family, where low power consumption, low supply voltage, and rail-to-rail operation make it suitable for battery-powered and portable systems. Two amplifiers are integrated into one package, reducing board area while providing independent channels.

The LMR932F-GE2 combines a 1.4 MHz gain-bandwidth product with low power consumption and a typical bias current of 35 nA. Its 0.35 V/µs slew rate supports small- and medium-signal bandwidth applications without requiring a high-speed amplifier. Rail-to-rail output operation helps preserve usable output range near the supply rails, while the 5.5 mV input-offset specification should be considered in precision DC applications. An 8-SOP surface-mount package supports compact, conventional PCB assembly.

The ROHM LMR932F series is positioned for low-voltage operation and low supply current. The dual configuration allows common tasks such as sensor amplification, active filtering, buffering, and level shifting to be implemented in one package. Because the amplifier operates down to 1.8 V, it is useful in systems using a single low-voltage rail. Its 1.4 MHz bandwidth makes it more appropriate for general-purpose analog signals than for high-frequency precision instrumentation.

Typical uses include portable sensor conditioning, low-voltage audio input stages, industrial control interfaces, battery-powered measurement systems, and general-purpose analog filtering. Two channels are useful when a design needs independent amplification for two sensors, a balanced signal path, or an active filter and buffer combination. The 8-SOP package also simplifies retrofitting and provides a straightforward alternative to larger dual-amplifier packages.

Designers should maintain input and output common-mode limits across the full supply range and verify output swing into the intended load. Decoupling capacitors should be placed close to the supply pins, while sensitive input routing should minimize leakage and nearby switching-node coupling. For low-frequency precision work, input bias current, offset voltage, and noise must be evaluated together rather than relying on bandwidth alone.

This page organizes the principal electrical and packaging characteristics, practical application guidance, comparison criteria, and sourcing information for engineers evaluating the LMR932F-GE2. It also distinguishes verified same-package replacements from related devices that use different package outlines.

के लिए ड्रॉप-इन विकल्प LMR932F-GE2 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

LMR932F-GE2 Maximum Ratings और Electrical Characteristics

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Gain-Bandwidth Product 1.4 MHz
Slew Rate 0.35 V/µs
Supply Voltage Range 1.8 V to 5 V
Input Bias Current 35 nA
Input Offset Voltage 5.5 mV
Output Architecture Rail-to-rail output
Signal Architecture Input/output full swing
पैकेज 8-SOP
पिन काउंट 8 pins
माउंटिंग प्रकार Surface mount
Product Classification Standard general-purpose amplifier
Supply Current Class Low power
Operating Voltage Class Low voltage
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification unknown

LMR932F-GE2 8-sop पिन कॉन्फ़िगरेशन गाइड

LMR932F-GE2 (8-sop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

LMR932F-GE2 के लिए 8-sop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LMR932F-GE2.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LMR932F-GE2 के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Sensor Conditioning, Low-Voltage Audio Input Stage, Portable Analog Signal Conditioning, Industrial Control Interface, Active Filtering and Buffering, Low-Voltage Data Acquisition.

🧩

Battery-Powered Sensor Conditioning

The LMR932F-GE2 fits low-voltage sensor front ends because each channel operates from 1.8 V to 5 V while exhibiting a 35 nA input bias current. The bias characteristic is especially relevant when amplifying high-impedance sensors, while the dual configuration can process two independent sensing channels in one 8-SOP package. With a 1.4 MHz gain-bandwidth product, the amplifier is appropriate for low-bandwidth sensor signals rather than wideband waveform capture. Designers should evaluate the 5.5 mV offset specification against the required measurement accuracy and confirm input common-mode limits at the selected supply voltage.

🎧

Low-Voltage Audio Input Stage

The LMR932F-GE2 can amplify low-level audio or microphone signals in portable equipment operating from a 1.8 V to 5 V rail. Rail-to-rail output helps retain signal swing near the available supply range, while the 0.35 V/µs slew rate is suitable for ordinary audio-band signals rather than high-definition high-frequency demands. The dual amplifier can support two audio channels or combine gain and buffering functions. Input bias current, offset voltage, noise, and output loading should be checked against the microphone impedance and the selected gain configuration.

📱

Portable Analog Signal Conditioning

The LMR932F-GE2 is useful in portable analog modules that require two amplifiers but have limited supply voltage and board area. Its 8-SOP package supports conventional surface-mount layouts, and the 1.8 V minimum supply allows operation from a single low-voltage source. Two channels can implement active filters, gain stages, buffers, or level shifters without using two separate packages. The 1.4 MHz bandwidth provides margin for general-purpose control and measurement signals. Final design work should verify the output range into the expected load and confirm that the selected feedback network remains stable over the intended gain range.

🏭

Industrial Control Interface

The LMR932F-GE2 can condition low-level control signals in industrial systems that operate from a 1.8 V to 5 V analog rail. Its dual-channel arrangement allows one amplifier to shape a sensor signal while the other buffers a reference or drives an interface stage. The 1.4 MHz gain-bandwidth product handles process-control and instrumentation signals within the audio-to-low-frequency range. Engineers should verify common-mode range, output swing, electromagnetic pickup, and stability under capacitive loading, particularly when long protected cables connect the board to field equipment.

⚡

Active Filtering and Buffering

The LMR932F-GE2 provides two amplifiers for active-filter or buffer implementations where a 1.8 V to 5 V operating range and low bias current are important. A 1.4 MHz gain-bandwidth product is suitable for low-frequency filters, while rail-to-rail output can improve usable signal range in a restricted supply environment. The two channels can be cascaded for higher-order filtering or used independently for signal conditioning. Component tolerances should be checked against the required filter response, and the amplifier's noise and offset characteristics should be included in the overall error budget.

🖥️

Low-Voltage Data Acquisition

The LMR932F-GE2 can provide analog gain and buffering ahead of an ADC in a compact low-voltage data-acquisition circuit. Its 35 nA input bias current reduces loading on high-impedance sources, while the 5.5 mV input-offset specification determines how much error appears at low signal levels. The 1.4 MHz bandwidth is suitable for slow or moderate-bandwidth measurements and general instrumentation rather than high-speed sampling systems. Engineers should compare the amplifier's settling behavior, noise, and drive capability with the ADC acquisition requirements, including the ADC's input-range and sampling architecture.

What are the key specifications of LMR932F-GE2 that engineers should know?
The LMR932F-GE2 is a dual, low-power operational amplifier with a 1.4 MHz gain-bandwidth product, 0.35 V/µs slew rate, 35 nA input bias current, and a 1.8 V to 5 V supply range. According to the ROHM product page, it uses an input/output full-swing architecture, while distributor documentation identifies rail-to-rail output operation. The device is packaged as an 8-SOP for surface-mount assembly.
What is the operating voltage range of LMR932F-GE2?
The LMR932F-GE2 operates from 1.8 V to 5 V. This range makes it suitable for low-voltage analog systems powered by a single battery or low-voltage regulated rail. According to the ROHM LMR932F product page, the series is designed for low-voltage operation and low supply current. The dual amplifier provides two independent channels within the same 8-SOP package.
Where can I download the LMR932F-GE2 datasheet PDF?
The official LMR932F-GE2 datasheet and product information are available from the ROHM LMR932F product page listed on this page. Use the manufacturer pin-description table, electrical-characteristics table, and application guidance when assigning the eight package pins or calculating circuit behavior. The manufacturer page is the preferred source because it defines the exact GE2 ordering code and package.
Where can I find the LMR932F-GE2 pinout?
Use the pin-description table in the ROHM manufacturer documentation for the LMR932F-GE2 8-SOP package. The distributor listing confirms that the GE2 ordering code is an 8-SOP device, while the manufacturer product page covers the complete LMR932F family. Confirm individual signal names, power pins, and no-connect positions against the GE2 package drawing before routing a PCB.
Is the LMR932F-GE2 rail-to-rail?
Yes, the LMR932F-GE2 provides rail-to-rail output operation and belongs to the LMR series described as an input/output full-swing operational amplifier family. Rail-to-rail output allows the output to approach the available supply limits under suitable load conditions. According to the ROHM product page, the family is intended specifically for low-voltage, low-power operation.
What can replace the LMR932F-GE2?
No verified same-package drop-in replacement for the LMR932F-GE2 is identified by the available cross-reference material. Related LMR932F ordering codes can use different package outlines, including 8-TSSOP, so changing the suffix may require a PCB redesign rather than a direct substitution. Use the Request a Quote form on this page to ask for an engineering review of a proposed replacement, and verify its pinout and electrical limits.
Is LMR932F-GE2 the same as LMR932FVT-GE2?
No, the LMR932F-GE2 and LMR932FVT-GE2 should not be treated as the same device. The LMR932F-GE2 is listed in an 8-SOP package, whereas LMR932FVT-GE2 is listed in an 8-TSSOP package and has different listed bandwidth, slew-rate, and offset characteristics. They are related family members, but the package difference prevents a guaranteed pin-to-pin PCB substitution.
LMR932F-GE2 vs LMR932FVT-GE2 — which is better for a compact PCB?
The LMR932F-GE2 is preferable when the PCB already uses the 8-SOP footprint or when the exact LMR932F-GE2 electrical characteristics are required. The LMR932FVT-GE2 offers a smaller 8-TSSOP outline but lists a 1.5 MHz gain-bandwidth product, 0.42 V/µs slew rate, and 1 mV offset voltage. The choice therefore depends on footprint compatibility, board area, and the complete operating requirements.
When should I choose the LMR932F-GE2 over another dual op amp?
Choose the LMR932F-GE2 when the design needs two low-power amplifier channels, a supply as low as 1.8 V, rail-to-rail output, and an established 8-SOP footprint. Its 1.4 MHz gain-bandwidth product and 35 nA input bias current suit general-purpose low-voltage signal conditioning. Select an alternative only after checking input common-mode range, output swing, offset, noise, stability, and package geometry.
Is LMR932F-GE2 suitable for battery-powered sensor interfaces?
The LMR932F-GE2 is suitable for many battery-powered sensor interfaces because it operates from 1.8 V to 5 V and has a low 35 nA input bias current. The dual configuration can condition two sensor outputs independently. Bias current can affect high-impedance sources, while the 5.5 mV offset specification may limit precision DC performance, so both values should be checked against the sensor impedance and required accuracy.
What is the output current capability of LMR932F-GE2?
The output-current limit for the exact LMR932F-GE2 ordering code is not stated in the available manufacturer and distributor summaries. Unlike the related LMR932FVT-GE2 summary, the target listing does not provide a numerical 90 mA-per-channel figure. Use the manufacturer electrical-characteristics table for the definitive output-current rating and verify output swing at the required load before finalizing the circuit.
Where can I buy LMR932F-GE2 online?
Use the Request a Quote form on this page to request LMR932F-GE2 availability, current lead time, minimum order quantity, and a quotation. The exact GE2 suffix matters because related LMR932F versions may use different packages. Procurement should confirm the 8-SOP package, manufacturer branding, date code, and delivery condition in the quotation before releasing an order.
What is the price of LMR932F-GE2?
Current LMR932F-GE2 pricing is obtained through the Request a Quote form on this page. Submit the exact MPN, required quantity, package format, and target date for a current quotation. Do not substitute a price for another LMR932F suffix, because package, quantity tier, lifecycle, and production conditions can change the commercial result.
What is the lead time and stock status for LMR932F-GE2?
Current stock and lead time for LMR932F-GE2 should be requested through the Request a Quote form on this page. Provide the required quantity and expected delivery date so the order can be matched to available production inventory and authorized supply. Confirm that the quotation covers the GE2 ordering code and 8-SOP package rather than a related TSSOP or MSOP variant.
Is the LMR932F-GE2 compliant with RoHS and REACH?
The RoHS and REACH status of the exact LMR932F-GE2 ordering code is not stated in the available manufacturer summary, so its compliance should be confirmed from the current ROHM product documentation or the applicable declaration of conformity. Request the manufacturer material-declaration record before using the amplifier in a regulated production design. A family-level or distributor categorization should not replace documentation tied to the ordered part.
What is the best cross-brand equivalent for LMR932F-GE2?
No cross-brand equivalent is established here because the available cross-reference results do not identify a candidate with both the same 8-SOP footprint and confirmed pin-to-pin electrical compatibility. A functionally similar low-power dual amplifier is not automatically a drop-in replacement because common-mode range, output swing, bias current, offset, stability, and pin assignments may differ. Provide a preferred replacement and circuit requirements for a formal compatibility review.

के लिए इंजीनियरिंग संदर्भ डेटा LMR932F-GE2 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LMR932F-GE2 for a low-voltage, dual-channel analog design that uses the 8-SOP footprint and benefits from 1.8 V operation, rail-to-rail output, and low input bias current. It is well suited to sensor conditioning, portable audio, buffering, and general industrial control interfaces. The related LMR932FVT-GE2 offers a smaller 8-TSSOP package and different listed dynamic and offset specifications, but it is not a direct PCB replacement for an existing 8-SOP design. No verified same-package cross-brand replacement is identified, so a substitution should be approved only after checking pinout, common-mode range, output swing, offset, bias current, noise, stability, and package tolerances. For high-precision or high-speed instrumentation, confirm whether the 1.4 MHz bandwidth and 5.5 mV offset meet the system requirements before final selection.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Package 8-SOP
Brand ROHM Semiconductor
Number of Amplifier Channels 2 circuits
Gain-Bandwidth Product 1.4 MHz
Slew Rate 0.35 V/µs
Supply Voltage Range 1.8 V to 5 V
— 35 nA
Input Offset Voltage 5.5 mV
Output Architecture Rail-to-rail output
Mounting Type Surface mount

मुख्य विशेषताएँ

  • Combines two low-power amplifier channels with a 1.8 V minimum supply (बनामSingle-amplifier 8-SOP alternatives)
  • Lower-input-bias dual amplifier option (बनामLMR932FVT-GE2)
  • Purpose-built low-voltage full-swing operation (बनामGeneral-purpose higher-voltage dual amplifiers)

डिज़ाइन नोट्स

Decouple each supply connection with a local ceramic bypass capacitor and retain a bulk capacitor near the analog section. Place the bypass capacitor adjacent to the amplifier power pins so switching and digital currents do not share a long return path with the input reference. This is particularly important for the 1.8 V to 5 V operating range because impedance and noise behavior vary substantially across the supply range.

Do not assume that a related LMR932F suffix is a drop-in replacement. The LMR932F-GE2 uses an 8-SOP package, while the identified LMR932FVT-GE2 uses an 8-TSSOP package and has different listed bandwidth, slew-rate, and offset values. Check land patterns, pin assignments, common-mode limits, output swing, and stability requirements before approving any replacement.

Route high-impedance input traces away from switching nodes, power inductors, and other high-current paths. Keep the dual channels physically separate enough to limit common-mode pickup between them when one channel carries a sensitive sensor signal. For source impedances near the level where 35 nA bias current creates meaningful voltage error, calculate that interaction before selecting the input network.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The available manufacturer and distributor summaries do not state compliance status for the exact LMR932F-GE2 ordering code. Obtain the current manufacturer declaration of conformity before production release.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LMR932F-GE2 datasheet LMR932F-GE2 pinout LMR932F-GE2 datasheet pdf LMR932F-GE2 equivalent LMR932F-GE2 replacement LMR932F-GE2 cross reference LMR932F-GE2 vs LMR932FVT-GE2 LMR932F-GE2 8-SOP footprint LMR932F-GE2 1.4MHz op amp LMR932F-GE2 1.8V operation ROHM LMR932F-GE2 LMR932F-GE2 price LMR932F-GE2 stock LMR932F-GE2 sensor amplifier

संबंधित कंपोनेंट्स और शब्द

ROHM Semiconductor LMR932F-GE2 LMR932F LMR932FVT-GE2 operational amplifier dual operational amplifier analog amplifier low-power amplifier rail-to-rail output input/output full swing gain-bandwidth product slew rate input bias current input offset voltage 8-SOP SOIC-8 surface-mount package sensor conditioning audio amplification active filter data acquisition low-voltage power management 1.8 V to 5 V supply
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें