LMR932F-GE2 - Dual 1.4MHz Low-Power Op Amp | ROHM
부품 번호: LMR932F-GE2 ✓ 활성LMR932F-GE2 개요
An operational amplifier, or op amp, is a high-gain analog building block that compares two input voltages and drives an output according to their difference. Within the power-management and signal-processing hierarchy, the LMR932F belongs to the operational-amplifier family, where low power consumption, low supply voltage, and rail-to-rail operation make it suitable for battery-powered and portable systems. Two amplifiers are integrated into one package, reducing board area while providing independent channels.
The LMR932F-GE2 combines a 1.4 MHz gain-bandwidth product with low power consumption and a typical bias current of 35 nA. Its 0.35 V/µs slew rate supports small- and medium-signal bandwidth applications without requiring a high-speed amplifier. Rail-to-rail output operation helps preserve usable output range near the supply rails, while the 5.5 mV input-offset specification should be considered in precision DC applications. An 8-SOP surface-mount package supports compact, conventional PCB assembly.
The ROHM LMR932F series is positioned for low-voltage operation and low supply current. The dual configuration allows common tasks such as sensor amplification, active filtering, buffering, and level shifting to be implemented in one package. Because the amplifier operates down to 1.8 V, it is useful in systems using a single low-voltage rail. Its 1.4 MHz bandwidth makes it more appropriate for general-purpose analog signals than for high-frequency precision instrumentation.
Typical uses include portable sensor conditioning, low-voltage audio input stages, industrial control interfaces, battery-powered measurement systems, and general-purpose analog filtering. Two channels are useful when a design needs independent amplification for two sensors, a balanced signal path, or an active filter and buffer combination. The 8-SOP package also simplifies retrofitting and provides a straightforward alternative to larger dual-amplifier packages.
Designers should maintain input and output common-mode limits across the full supply range and verify output swing into the intended load. Decoupling capacitors should be placed close to the supply pins, while sensitive input routing should minimize leakage and nearby switching-node coupling. For low-frequency precision work, input bias current, offset voltage, and noise must be evaluated together rather than relying on bandwidth alone.
This page organizes the principal electrical and packaging characteristics, practical application guidance, comparison criteria, and sourcing information for engineers evaluating the LMR932F-GE2. It also distinguishes verified same-package replacements from related devices that use different package outlines.
드롭인 대체품: LMR932F-GE2 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 제품에는 사용 가능한 드롭인 대체품이 없습니다.
대체품 요청LMR932F-GE2 최대 정격 & 전기적 특성
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Circuits | 2 circuits |
| Gain-Bandwidth Product | 1.4 MHz |
| Slew Rate | 0.35 V/µs |
| Supply Voltage Range | 1.8 V to 5 V |
| Input Bias Current | 35 nA |
| Input Offset Voltage | 5.5 mV |
| Output Architecture | Rail-to-rail output |
| Signal Architecture | Input/output full swing |
| 패키지 | 8-SOP |
| 핀 수 | 8 pins |
| 실장 유형 | Surface mount |
| Product Classification | Standard general-purpose amplifier |
| Supply Current Class | Low power |
| Operating Voltage Class | Low voltage |
| RoHS 상태 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
LMR932F-GE2 8-sop 핀 구성 가이드
LMR932F-GE2(8-sop 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LMR932F-GE2.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LMR932F-GE2 적합 용도: 6 애플리케이션s: Battery-Powered Sensor Conditioning, Low-Voltage Audio Input Stage, Portable Analog Signal Conditioning, Industrial Control Interface, Active Filtering and Buffering, Low-Voltage Data Acquisition.
Battery-Powered Sensor Conditioning
The LMR932F-GE2 fits low-voltage sensor front ends because each channel operates from 1.8 V to 5 V while exhibiting a 35 nA input bias current. The bias characteristic is especially relevant when amplifying high-impedance sensors, while the dual configuration can process two independent sensing channels in one 8-SOP package. With a 1.4 MHz gain-bandwidth product, the amplifier is appropriate for low-bandwidth sensor signals rather than wideband waveform capture. Designers should evaluate the 5.5 mV offset specification against the required measurement accuracy and confirm input common-mode limits at the selected supply voltage.
추천
Low-Voltage Audio Input Stage
The LMR932F-GE2 can amplify low-level audio or microphone signals in portable equipment operating from a 1.8 V to 5 V rail. Rail-to-rail output helps retain signal swing near the available supply range, while the 0.35 V/µs slew rate is suitable for ordinary audio-band signals rather than high-definition high-frequency demands. The dual amplifier can support two audio channels or combine gain and buffering functions. Input bias current, offset voltage, noise, and output loading should be checked against the microphone impedance and the selected gain configuration.
추천
Portable Analog Signal Conditioning
The LMR932F-GE2 is useful in portable analog modules that require two amplifiers but have limited supply voltage and board area. Its 8-SOP package supports conventional surface-mount layouts, and the 1.8 V minimum supply allows operation from a single low-voltage source. Two channels can implement active filters, gain stages, buffers, or level shifters without using two separate packages. The 1.4 MHz bandwidth provides margin for general-purpose control and measurement signals. Final design work should verify the output range into the expected load and confirm that the selected feedback network remains stable over the intended gain range.
추천
Industrial Control Interface
The LMR932F-GE2 can condition low-level control signals in industrial systems that operate from a 1.8 V to 5 V analog rail. Its dual-channel arrangement allows one amplifier to shape a sensor signal while the other buffers a reference or drives an interface stage. The 1.4 MHz gain-bandwidth product handles process-control and instrumentation signals within the audio-to-low-frequency range. Engineers should verify common-mode range, output swing, electromagnetic pickup, and stability under capacitive loading, particularly when long protected cables connect the board to field equipment.
추천
Active Filtering and Buffering
The LMR932F-GE2 provides two amplifiers for active-filter or buffer implementations where a 1.8 V to 5 V operating range and low bias current are important. A 1.4 MHz gain-bandwidth product is suitable for low-frequency filters, while rail-to-rail output can improve usable signal range in a restricted supply environment. The two channels can be cascaded for higher-order filtering or used independently for signal conditioning. Component tolerances should be checked against the required filter response, and the amplifier's noise and offset characteristics should be included in the overall error budget.
추천
Low-Voltage Data Acquisition
The LMR932F-GE2 can provide analog gain and buffering ahead of an ADC in a compact low-voltage data-acquisition circuit. Its 35 nA input bias current reduces loading on high-impedance sources, while the 5.5 mV input-offset specification determines how much error appears at low signal levels. The 1.4 MHz bandwidth is suitable for slow or moderate-bandwidth measurements and general instrumentation rather than high-speed sampling systems. Engineers should compare the amplifier's settling behavior, noise, and drive capability with the ADC acquisition requirements, including the ADC's input-range and sampling architecture.
추천
추천 제품 요약
엔지니어링 참조 데이터: LMR932F-GE2 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 |
|---|---|
| Package | 8-SOP |
| Brand | ROHM Semiconductor |
| Number of Amplifier Channels | 2 circuits |
| Gain-Bandwidth Product | 1.4 MHz |
| Slew Rate | 0.35 V/µs |
| Supply Voltage Range | 1.8 V to 5 V |
| — | 35 nA |
| Input Offset Voltage | 5.5 mV |
| Output Architecture | Rail-to-rail output |
| Mounting Type | Surface mount |
주요 차별점
- Combines two low-power amplifier channels with a 1.8 V minimum supply (vs Single-amplifier 8-SOP alternatives)
- Lower-input-bias dual amplifier option (vs LMR932FVT-GE2)
- Purpose-built low-voltage full-swing operation (vs General-purpose higher-voltage dual amplifiers)
설계 노트
Decouple each supply connection with a local ceramic bypass capacitor and retain a bulk capacitor near the analog section. Place the bypass capacitor adjacent to the amplifier power pins so switching and digital currents do not share a long return path with the input reference. This is particularly important for the 1.8 V to 5 V operating range because impedance and noise behavior vary substantially across the supply range.
Do not assume that a related LMR932F suffix is a drop-in replacement. The LMR932F-GE2 uses an 8-SOP package, while the identified LMR932FVT-GE2 uses an 8-TSSOP package and has different listed bandwidth, slew-rate, and offset values. Check land patterns, pin assignments, common-mode limits, output swing, and stability requirements before approving any replacement.
Route high-impedance input traces away from switching nodes, power inductors, and other high-current paths. Keep the dual channels physically separate enough to limit common-mode pickup between them when one channel carries a sensitive sensor signal. For source impedances near the level where 35 nA bias current creates meaningful voltage error, calculate that interaction before selecting the input network.
규정 준수 정보
The available manufacturer and distributor summaries do not state compliance status for the exact LMR932F-GE2 ordering code. Obtain the current manufacturer declaration of conformity before production release.