LMR932F-GE2 - Dual 1.4MHz Low-Power Op Amp | ROHM
料号: LMR932F-GE2 ✓ 量产中LMR932F-GE2 概述
An operational amplifier, or op amp, is a high-gain analog building block that compares two input voltages and drives an output according to their difference. Within the power-management and signal-processing hierarchy, the LMR932F belongs to the operational-amplifier family, where low power consumption, low supply voltage, and rail-to-rail operation make it suitable for battery-powered and portable systems. Two amplifiers are integrated into one package, reducing board area while providing independent channels.
The LMR932F-GE2 combines a 1.4 MHz gain-bandwidth product with low power consumption and a typical bias current of 35 nA. Its 0.35 V/µs slew rate supports small- and medium-signal bandwidth applications without requiring a high-speed amplifier. Rail-to-rail output operation helps preserve usable output range near the supply rails, while the 5.5 mV input-offset specification should be considered in precision DC applications. An 8-SOP surface-mount package supports compact, conventional PCB assembly.
The ROHM LMR932F series is positioned for low-voltage operation and low supply current. The dual configuration allows common tasks such as sensor amplification, active filtering, buffering, and level shifting to be implemented in one package. Because the amplifier operates down to 1.8 V, it is useful in systems using a single low-voltage rail. Its 1.4 MHz bandwidth makes it more appropriate for general-purpose analog signals than for high-frequency precision instrumentation.
Typical uses include portable sensor conditioning, low-voltage audio input stages, industrial control interfaces, battery-powered measurement systems, and general-purpose analog filtering. Two channels are useful when a design needs independent amplification for two sensors, a balanced signal path, or an active filter and buffer combination. The 8-SOP package also simplifies retrofitting and provides a straightforward alternative to larger dual-amplifier packages.
Designers should maintain input and output common-mode limits across the full supply range and verify output swing into the intended load. Decoupling capacitors should be placed close to the supply pins, while sensitive input routing should minimize leakage and nearby switching-node coupling. For low-frequency precision work, input bias current, offset voltage, and noise must be evaluated together rather than relying on bandwidth alone.
This page organizes the principal electrical and packaging characteristics, practical application guidance, comparison criteria, and sourcing information for engineers evaluating the LMR932F-GE2. It also distinguishes verified same-package replacements from related devices that use different package outlines.
直接替换替代料: LMR932F-GE2 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
该产品暂无直接替换替代料。
请求替代料LMR932F-GE2 最大额定值与电气特性
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Circuits | 2 circuits |
| Gain-Bandwidth Product | 1.4 MHz |
| Slew Rate | 0.35 V/µs |
| Supply Voltage Range | 1.8 V to 5 V |
| Input Bias Current | 35 nA |
| Input Offset Voltage | 5.5 mV |
| Output Architecture | Rail-to-rail output |
| Signal Architecture | Input/output full swing |
| 封装 | 8-SOP |
| 引脚数量 | 8 pins |
| 安装类型 | Surface mount |
| Product Classification | Standard general-purpose amplifier |
| Supply Current Class | Low power |
| Operating Voltage Class | Low voltage |
| RoHS 状态 | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
LMR932F-GE2 8-sop 引脚配置指南
LMR932F-GE2(8-sop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: LMR932F-GE2.
请参阅 数据手册 以查看完整引脚配置。
典型应用
LMR932F-GE2 适用于 6 应用s: Battery-Powered Sensor Conditioning, Low-Voltage Audio Input Stage, Portable Analog Signal Conditioning, Industrial Control Interface, Active Filtering and Buffering, Low-Voltage Data Acquisition.
Battery-Powered Sensor Conditioning
The LMR932F-GE2 fits low-voltage sensor front ends because each channel operates from 1.8 V to 5 V while exhibiting a 35 nA input bias current. The bias characteristic is especially relevant when amplifying high-impedance sensors, while the dual configuration can process two independent sensing channels in one 8-SOP package. With a 1.4 MHz gain-bandwidth product, the amplifier is appropriate for low-bandwidth sensor signals rather than wideband waveform capture. Designers should evaluate the 5.5 mV offset specification against the required measurement accuracy and confirm input common-mode limits at the selected supply voltage.
推荐
Low-Voltage Audio Input Stage
The LMR932F-GE2 can amplify low-level audio or microphone signals in portable equipment operating from a 1.8 V to 5 V rail. Rail-to-rail output helps retain signal swing near the available supply range, while the 0.35 V/µs slew rate is suitable for ordinary audio-band signals rather than high-definition high-frequency demands. The dual amplifier can support two audio channels or combine gain and buffering functions. Input bias current, offset voltage, noise, and output loading should be checked against the microphone impedance and the selected gain configuration.
推荐
Portable Analog Signal Conditioning
The LMR932F-GE2 is useful in portable analog modules that require two amplifiers but have limited supply voltage and board area. Its 8-SOP package supports conventional surface-mount layouts, and the 1.8 V minimum supply allows operation from a single low-voltage source. Two channels can implement active filters, gain stages, buffers, or level shifters without using two separate packages. The 1.4 MHz bandwidth provides margin for general-purpose control and measurement signals. Final design work should verify the output range into the expected load and confirm that the selected feedback network remains stable over the intended gain range.
推荐
Industrial Control Interface
The LMR932F-GE2 can condition low-level control signals in industrial systems that operate from a 1.8 V to 5 V analog rail. Its dual-channel arrangement allows one amplifier to shape a sensor signal while the other buffers a reference or drives an interface stage. The 1.4 MHz gain-bandwidth product handles process-control and instrumentation signals within the audio-to-low-frequency range. Engineers should verify common-mode range, output swing, electromagnetic pickup, and stability under capacitive loading, particularly when long protected cables connect the board to field equipment.
推荐
Active Filtering and Buffering
The LMR932F-GE2 provides two amplifiers for active-filter or buffer implementations where a 1.8 V to 5 V operating range and low bias current are important. A 1.4 MHz gain-bandwidth product is suitable for low-frequency filters, while rail-to-rail output can improve usable signal range in a restricted supply environment. The two channels can be cascaded for higher-order filtering or used independently for signal conditioning. Component tolerances should be checked against the required filter response, and the amplifier's noise and offset characteristics should be included in the overall error budget.
推荐
Low-Voltage Data Acquisition
The LMR932F-GE2 can provide analog gain and buffering ahead of an ADC in a compact low-voltage data-acquisition circuit. Its 35 nA input bias current reduces loading on high-impedance sources, while the 5.5 mV input-offset specification determines how much error appears at low signal levels. The 1.4 MHz bandwidth is suitable for slow or moderate-bandwidth measurements and general instrumentation rather than high-speed sampling systems. Engineers should compare the amplifier's settling behavior, noise, and drive capability with the ADC acquisition requirements, including the ADC's input-range and sampling architecture.
推荐
推荐产品汇总
工程参考数据: LMR932F-GE2 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 8-SOP |
| Brand | ROHM Semiconductor |
| Number of Amplifier Channels | 2 circuits |
| Gain-Bandwidth Product | 1.4 MHz |
| Slew Rate | 0.35 V/µs |
| Supply Voltage Range | 1.8 V to 5 V |
| — | 35 nA |
| Input Offset Voltage | 5.5 mV |
| Output Architecture | Rail-to-rail output |
| Mounting Type | Surface mount |
关键差异点
- Combines two low-power amplifier channels with a 1.8 V minimum supply (对比 Single-amplifier 8-SOP alternatives)
- Lower-input-bias dual amplifier option (对比 LMR932FVT-GE2)
- Purpose-built low-voltage full-swing operation (对比 General-purpose higher-voltage dual amplifiers)
设计说明
Decouple each supply connection with a local ceramic bypass capacitor and retain a bulk capacitor near the analog section. Place the bypass capacitor adjacent to the amplifier power pins so switching and digital currents do not share a long return path with the input reference. This is particularly important for the 1.8 V to 5 V operating range because impedance and noise behavior vary substantially across the supply range.
Do not assume that a related LMR932F suffix is a drop-in replacement. The LMR932F-GE2 uses an 8-SOP package, while the identified LMR932FVT-GE2 uses an 8-TSSOP package and has different listed bandwidth, slew-rate, and offset values. Check land patterns, pin assignments, common-mode limits, output swing, and stability requirements before approving any replacement.
Route high-impedance input traces away from switching nodes, power inductors, and other high-current paths. Keep the dual channels physically separate enough to limit common-mode pickup between them when one channel carries a sensitive sensor signal. For source impedances near the level where 35 nA bias current creates meaningful voltage error, calculate that interaction before selecting the input network.
合规信息
The available manufacturer and distributor summaries do not state compliance status for the exact LMR932F-GE2 ordering code. Obtain the current manufacturer declaration of conformity before production release.