MAX211ECWI+ 4/5 RS-232 Transceiver, 5V, 28-SOIC | Maxim
MPN: MAX211ECWI+ ✓ सक्रियMAX211ECWI+ अवलोकन
An RS-232 transceiver is a semiconductor interface that bridges the voltage-domain difference between CMOS logic and a ±15V RS-232 link. Within the interface IC hierarchy, the MAX211ECWI+ combines charge-pump voltage conversion, differential line drivers, and differential receivers in one package. This integration allows equipment with 5V digital logic to communicate with RS-232 peripherals without implementing discrete level-shifting circuits.
The device provides four transmit drivers and five receive channels, making it suitable for multi-port serial equipment, industrial controllers, POS terminals, and service interfaces. Its integrated charge pump generates the bipolar voltage needed by RS-232 drivers while operating from one 5V rail. The four required 0.1uF external capacitors must be placed close to their designated pins for stable charge-pump operation.
The MAX211ECWI+ combines four drivers, five receivers, and a charge pump in a single 28-pin SOIC. Maximum data signaling rate, output levels, receiver thresholds, and supply-current limits should be taken from the manufacturer electrical-characteristics table. The 15kV ESD rating applies to the specified protected interface pins and does not by itself establish compliance with every industrial or automotive ESD standard.
Typical uses include point-of-sale equipment, test and measurement instruments, data acquisition systems, and industrial serial controllers. In these applications, the five receiver channels can monitor multiple RS-232 signals while four driver channels support outbound control or communication links. Systems requiring more than four active RS-232 ports should count both transmitter direction requirements and receiver loading before assigning channels.
The four 0.1uF charge-pump capacitors are essential external components and must follow the datasheet placement and capacitance requirements. Their connection traces should be short and isolated from sensitive analog or high-speed signal paths. The 28-SOIC footprint is relatively large compared with modern compact interface ICs, but it supports a conventional through-hole-compatible surface-mount assembly process.
This product page combines device specifications, same-family drop-in alternatives, interface-function comparisons, and practical PCB implementation guidance. The comparison information highlights package, channel count, supply voltage, temperature range, and ESD protection so engineers can select the correct MAX211E-family option without relying on suffix similarity alone.
के लिए ड्रॉप-इन विकल्प MAX211ECWI+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX211ECWI+ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Receiver Count, Supply Voltage, Driver Count, Product Type.
MAX211CWI+
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX211EWI+
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX211EEWI+
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MAX211ECWI
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX211ECWI+T
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MAX211ECWI+ विशेषताएं
| Device Type | RS-232 transceiver |
| Technology | RS-232 and CMOS |
| सप्लाई वोल्टेज | 5V |
| Transmitter Count | 4 drivers |
| Receiver Count | 5 receivers |
| Communication Standard | RS-232 and V.28 |
| ESD Protection | ±15kV |
| External Charge-Pump Capacitors | 4 x 0.1uF |
| ऑपरेटिंग तापमान | 0C to 70C |
| पैकेज | 28-SOIC (WSOIC) |
| Package Pin Count | 28 pins |
| माउंटिंग प्रकार | Surface mount |
| Package Width | 7.50mm |
MAX211ECWI+ 7.50mm पिन कॉन्फ़िगरेशन गाइड
MAX211ECWI+ (7.50mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX211ECWI+.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MAX211ECWI+ के लिए उपयुक्त है 6 अनुप्रयोगs: Point-of-Sale Terminal Interface, Industrial Serial Controller, Test and Measurement Instrument, Data Acquisition Front End, Service and Diagnostics Console, Embedded Communication Module.
Point-of-Sale Terminal Interface
The MAX211ECWI+ fits point-of-sale equipment that must bridge 5V controller logic to external RS-232 peripherals. Its four transmit drivers can carry outbound commands, status requests, or printer-control signals, while five receiver channels can monitor inbound responses from several devices. The integrated charge pump operates from one 5V rail, eliminating a separate negative supply at the interface. Four external 0.1uF capacitors are still required and should follow the datasheet placement guidance. Because the specified operating range is 0C to 70C, the part is best suited to indoor commercial equipment that does not require industrial temperature margins.
अनुशंसित
Industrial Serial Controller
The MAX211ECWI+ can support a 5V industrial controller that exchanges several command and status lines with RS-232 equipment. Its 4/5 organization provides four driver outputs and five receiver inputs in one 28-SOIC device, reducing the number of separate interface packages required for multi-signal control. The 15kV ESD rating strengthens the interface against electrostatic discharge on exposed RS-232 connections, although system-level routing and grounding remain important. The commercial 0C to 70C range makes this ordering code suitable for indoor controllers; use a wider-temperature MAX211E grade when factory environments extend beyond that interval.
अनुशंसित
Test and Measurement Instrument
The MAX211ECWI+ is appropriate for laboratory and field-test instruments that need to exchange multiple RS-232 commands with a host computer or peripheral. Four transmit channels can carry instrument commands, trigger signals, or status outputs, and five receive channels can support acknowledgements and measurement-related control inputs. A single 5V supply is convenient for compact handheld and bench-top equipment, while the on-chip charge pump produces the bipolar signaling voltage required by RS-232. Keep the four 0.1uF charge-pump capacitors close to their specified pins, and route transceiver outputs away from sensitive measurement circuitry to reduce coupling.
अनुशंसित
Data Acquisition Front End
A data-acquisition controller can use the MAX211ECWI+ to bridge several RS-232 command and status lines between an embedded controller and external measurement equipment. The five receivers allow multiple input signals to be observed, while four drivers support configuration commands and remote triggers. The 5V architecture integrates readily with digital control logic, and the internal charge pump avoids a separate negative supply rail. Four external 0.1uF capacitors are mandatory, making charge-pump layout a first-order PCB concern. The 28-SOIC footprint also offers adequate pin spacing for straightforward assembly, while the 0C to 70C rating suits room-controlled acquisition equipment.
अनुशंसित
Service and Diagnostics Console
The MAX211ECWI+ supports service consoles that communicate with installed equipment through several RS-232 links. A technician interface can use four driver channels for commands and test patterns, while five receiver channels collect acknowledgements, status bits, and diagnostic responses. The 15kV ESD protection is useful where service leads connect to externally accessible equipment, but cable routing and grounding still determine real-world robustness. The device's single +5V operation simplifies portable and rack-mounted console designs. Its specified 0C to 70C operating range covers typical indoor service environments but should be checked against temperature requirements at the installation site.
अनुशंसित
Embedded Communication Module
The MAX211ECWI+ can provide a multi-signal RS-232 interface for an embedded communication module built around 5V logic. Four drivers support outbound telemetry or control traffic, and five receivers accommodate inbound acknowledgements and status channels. Integrating the charge pump in the transceiver reduces the external power-supply complexity compared with a discrete RS-232 implementation, although the four required 0.1uF capacitors must be installed. The 28-SOIC package is larger than highly integrated USB-to-serial bridges, making this device most relevant when several RS-232 channels are required. The 0C to 70C range fits indoor communications equipment.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MAX211ECWI+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MAX211CWI+ | MAX211EWI+ | MAX211EEWI+ | MAX211ECWI | MAX211ECWI+T |
|---|---|---|---|---|---|---|
| Package | 28-SOIC (WSOIC) | 28-SOIC (WSOIC) | 28-SOIC (WSOIC) | 28-SOIC (WSOIC) | 28-SOIC (WSOIC) | 28-SOIC (WSOIC) |
| Brand | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated | Maxim Integrated |
| Supply Voltage | 5V | 5V | 5V | 5V | 5V | 5V |
| Transceiver Configuration | 4 drivers / 5 receivers | 4 drivers / 5 receivers | 4 drivers / 5 receivers | 4 drivers / 5 receivers | 4 drivers / 5 receivers | 4 drivers / 5 receivers |
| Communication Standard | RS-232 and V.28 | RS-232 and V.28 | RS-232 and V.28 | RS-232 and V.28 | RS-232 and V.28 | RS-232 and V.28 |
| External Charge-Pump Capacitors | 4 x 0.1uF | 4 x 0.1uF | 4 x 0.1uF | 4 x 0.1uF | 4 x 0.1uF | 4 x 0.1uF |
मुख्य विशेषताएँ
- Four transmit drivers and five receive channels in one interface IC (बनामMAX3232IPW)
- 15kV ESD protection on the RS-232 interface (बनामMAX211CWI+)
- Single 5V interface operation with integrated charge pump (बनामMAX211EEWI+)
डिज़ाइन नोट्स
Place the four 0.1uF charge-pump capacitors exactly at the nodes shown in the manufacturer application circuit. Keep each capacitor-to-pin trace short and minimize loop area because the charge-pump stage generates the bipolar voltage used by the RS-232 drivers. Avoid routing these nodes beneath the package or through long shared paths. Confirm capacitor tolerance, voltage rating, and dielectric requirements from the datasheet before releasing the PCB layout.
Separate RS-232 driver outputs and receiver inputs from sensitive analog or high-speed signal paths. Although the interface uses differential signaling internally, the external connector and cable can couple transient energy into nearby circuitry. Use a solid ground plane, short ground returns, and a sensible separation between the transceiver and precision analog sections. Apply the package pin table to assign connector-side nets; do not infer pin functions from another RS-232 device.
Do not substitute the charge-pump capacitors with a different capacitance without checking the manufacturer recommendation, and do not omit the four external capacitors because the charge pump is integrated. Also verify that the MAX211E suffix preserves the required temperature grade. MAX211ECWI+ is listed for 0C to 70C, while MAX211EEWI+ is identified as -40C to 85C. A same-footprint substitute is not automatically acceptable when environmental limits or enable functions differ.
Treat the RS-232 connector and cable as an electromagnetic-interference entry point. Keep the driver output paths short, provide a continuous return path, and avoid broad copper that can increase capacitive coupling to adjacent signals. The ±15kV ESD rating applies to protected interface connections and should be supported by chassis grounding, surge protection, and cable design where the equipment will be exposed to severe transients. Do not use the IC rating as a substitute for a complete enclosure and protective-network design.
अनुपालन जानकारी
The device is described as an RS-232 transceiver with ±15kV ESD protection. No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration was identified for this ordering code.