Maxim Integrated

MAX211ECWI+ 4/5 RS-232 Transceiver, 5V, 28-SOIC | Maxim

MPN: MAX211ECWI+ ✓ Active
5V Vdss 28-SOIC (WSOIC) Package
MOQ: 1 |

MAX211ECWI+ Overview

The Maxim MAX211ECWI+ is a four-driver, five-receiver RS-232 transceiver operating from a single 5V supply in a 28-pin SOIC package. It supports the RS-232 and V.28 communication standards, provides 15kV ESD protection, and uses four external 0.1uF charge-pump capacitors. The MAX211ECWI+ is specified for a 0C to 70C operating-temperature range.

An RS-232 transceiver is a semiconductor interface that bridges the voltage-domain difference between CMOS logic and a ±15V RS-232 link. Within the interface IC hierarchy, the MAX211ECWI+ combines charge-pump voltage conversion, differential line drivers, and differential receivers in one package. This integration allows equipment with 5V digital logic to communicate with RS-232 peripherals without implementing discrete level-shifting circuits.

The device provides four transmit drivers and five receive channels, making it suitable for multi-port serial equipment, industrial controllers, POS terminals, and service interfaces. Its integrated charge pump generates the bipolar voltage needed by RS-232 drivers while operating from one 5V rail. The four required 0.1uF external capacitors must be placed close to their designated pins for stable charge-pump operation.

The MAX211ECWI+ combines four drivers, five receivers, and a charge pump in a single 28-pin SOIC. Maximum data signaling rate, output levels, receiver thresholds, and supply-current limits should be taken from the manufacturer electrical-characteristics table. The 15kV ESD rating applies to the specified protected interface pins and does not by itself establish compliance with every industrial or automotive ESD standard.

Typical uses include point-of-sale equipment, test and measurement instruments, data acquisition systems, and industrial serial controllers. In these applications, the five receiver channels can monitor multiple RS-232 signals while four driver channels support outbound control or communication links. Systems requiring more than four active RS-232 ports should count both transmitter direction requirements and receiver loading before assigning channels.

The four 0.1uF charge-pump capacitors are essential external components and must follow the datasheet placement and capacitance requirements. Their connection traces should be short and isolated from sensitive analog or high-speed signal paths. The 28-SOIC footprint is relatively large compared with modern compact interface ICs, but it supports a conventional through-hole-compatible surface-mount assembly process.

This product page combines device specifications, same-family drop-in alternatives, interface-function comparisons, and practical PCB implementation guidance. The comparison information highlights package, channel count, supply voltage, temperature range, and ESD protection so engineers can select the correct MAX211E-family option without relying on suffix similarity alone.

Drop-in alternatives for MAX211ECWI+ — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with MAX211ECWI+ (same form factor and footprint) — differing in Package, Receiver Count, Supply Voltage, Driver Count, Product Type.

Analog Devices
Package: 28-pin wide SOIC
Supply Voltage: 4.5V to 5.5V
Product Type: RS-232 and V.28 transceiver
Compare with MAX211ECWI+ →
Analog Devices
Package: 28-pin wide SOIC
Supply Voltage: +5 V
Driver Count: 4 drivers
Compare with MAX211ECWI+ →
Maxim Integrated
Package: 28-pin WSOIC
Receiver Count: 5 channels
Driver Count: 4 channels
Compare with MAX211ECWI+ →
Analog Devices
Package: 28-pin wide SOIC
Receiver Count: 5
Supply Voltage: +5 V
Compare with MAX211ECWI+ →

MAX211CWI+

✅ Drop-In
Analog Devices
📦 28-SOIC (WSOIC)
RS-232 and V.28 transceiver · 4.5V to 5.5V · 4 · 5 · In excess of 120kbps · 4 x 0.1uF · ±5V EIA/TIA-232E levels · Single +5V supply

Contact for price

View Datasheet →

MAX211EWI+

✅ Drop-In
Analog Devices
📦 28-SOIC (WSOIC)
RS-232 and V.28 transceiver · +5 V · 4 · 5 · In excess of 120 kbps · ±5 V EIA/TIA-232E · Integrated · 4 × 0.1 µF

Contact for price

View Datasheet →

MAX211EEWI+

✅ Drop-In
Maxim Integrated
📦 28-SOIC (WSOIC)
4 drivers / 5 receivers · RS-232 · 4.5V to 5.5V · +5V · 4 channels · 5 channels · ±15kV · Integrated

Contact for price

View Datasheet →

MAX211ECWI

✅ Drop-In
📦 28-SOIC (WSOIC)
Same 5V, 4/5 RS-232, 15kV ESD-protected, 28-SOIC device; confirm the difference between the base ordering code and plus-qualified code

📋 Reference alternative (not in catalog)

MAX211ECWI+T

✅ Drop-In
📦 28-SOIC (WSOIC)
Same 5V, 4/5 RS-232 and 28-SOIC configuration; tape-and-reel ordering option with no listed electrical difference

📋 Reference alternative (not in catalog)

MAX211ECWI+ Specifications

Device Type RS-232 transceiver
Technology RS-232 and CMOS
Supply Voltage 5V
Transmitter Count 4 drivers
Receiver Count 5 receivers
Communication Standard RS-232 and V.28
ESD Protection ±15kV
External Charge-Pump Capacitors 4 x 0.1uF
Operating Temperature 0C to 70C
Package 28-SOIC (WSOIC)
Package Pin Count 28 pins
Mounting Type Surface mount
Package Width 7.50mm

MAX211ECWI+ 7.50mm Pin Configuration Guide

Pin configuration for MAX211ECWI+ (7.50mm package). Pin numbering, functions, and connection diagrams are defined in the manufacturer datasheet. Refer to it for the exact footprint and soldering guidelines.

7.50mm package pinout diagram for MAX211ECWI+

No detailed pinout data available for MAX211ECWI+.

Refer to the datasheet for full pin configuration.

Typical Applications

MAX211ECWI+ is suitable for 6 applications: Point-of-Sale Terminal Interface, Industrial Serial Controller, Test and Measurement Instrument, Data Acquisition Front End, Service and Diagnostics Console, Embedded Communication Module.

🖥️

Point-of-Sale Terminal Interface

The MAX211ECWI+ fits point-of-sale equipment that must bridge 5V controller logic to external RS-232 peripherals. Its four transmit drivers can carry outbound commands, status requests, or printer-control signals, while five receiver channels can monitor inbound responses from several devices. The integrated charge pump operates from one 5V rail, eliminating a separate negative supply at the interface. Four external 0.1uF capacitors are still required and should follow the datasheet placement guidance. Because the specified operating range is 0C to 70C, the part is best suited to indoor commercial equipment that does not require industrial temperature margins.

🏭

Industrial Serial Controller

The MAX211ECWI+ can support a 5V industrial controller that exchanges several command and status lines with RS-232 equipment. Its 4/5 organization provides four driver outputs and five receiver inputs in one 28-SOIC device, reducing the number of separate interface packages required for multi-signal control. The 15kV ESD rating strengthens the interface against electrostatic discharge on exposed RS-232 connections, although system-level routing and grounding remain important. The commercial 0C to 70C range makes this ordering code suitable for indoor controllers; use a wider-temperature MAX211E grade when factory environments extend beyond that interval.

📺

Test and Measurement Instrument

The MAX211ECWI+ is appropriate for laboratory and field-test instruments that need to exchange multiple RS-232 commands with a host computer or peripheral. Four transmit channels can carry instrument commands, trigger signals, or status outputs, and five receive channels can support acknowledgements and measurement-related control inputs. A single 5V supply is convenient for compact handheld and bench-top equipment, while the on-chip charge pump produces the bipolar signaling voltage required by RS-232. Keep the four 0.1uF charge-pump capacitors close to their specified pins, and route transceiver outputs away from sensitive measurement circuitry to reduce coupling.

🖥️

Data Acquisition Front End

A data-acquisition controller can use the MAX211ECWI+ to bridge several RS-232 command and status lines between an embedded controller and external measurement equipment. The five receivers allow multiple input signals to be observed, while four drivers support configuration commands and remote triggers. The 5V architecture integrates readily with digital control logic, and the internal charge pump avoids a separate negative supply rail. Four external 0.1uF capacitors are mandatory, making charge-pump layout a first-order PCB concern. The 28-SOIC footprint also offers adequate pin spacing for straightforward assembly, while the 0C to 70C rating suits room-controlled acquisition equipment.

🔧

Service and Diagnostics Console

The MAX211ECWI+ supports service consoles that communicate with installed equipment through several RS-232 links. A technician interface can use four driver channels for commands and test patterns, while five receiver channels collect acknowledgements, status bits, and diagnostic responses. The 15kV ESD protection is useful where service leads connect to externally accessible equipment, but cable routing and grounding still determine real-world robustness. The device's single +5V operation simplifies portable and rack-mounted console designs. Its specified 0C to 70C operating range covers typical indoor service environments but should be checked against temperature requirements at the installation site.

🌐

Embedded Communication Module

The MAX211ECWI+ can provide a multi-signal RS-232 interface for an embedded communication module built around 5V logic. Four drivers support outbound telemetry or control traffic, and five receivers accommodate inbound acknowledgements and status channels. Integrating the charge pump in the transceiver reduces the external power-supply complexity compared with a discrete RS-232 implementation, although the four required 0.1uF capacitors must be installed. The 28-SOIC package is larger than highly integrated USB-to-serial bridges, making this device most relevant when several RS-232 channels are required. The 0C to 70C range fits indoor communications equipment.

What is the MAX211ECWI+?
The MAX211ECWI+ is a four-driver, five-receiver RS-232 transceiver for 5V equipment. It implements RS-232 and V.28 communication, uses an integrated charge pump with four external 0.1uF capacitors, and is offered in a 28-pin SOIC package. According to the Analog Devices MAX211E product page, the MAX211E family is designed for RS-232 and V.28 communications in harsh operating environments.
What is the operating voltage of MAX211ECWI+?
The MAX211ECWI+ operates from a single 5V supply. Its charge-pump circuitry develops the bipolar voltage required by the RS-232 drivers, so the system does not need a separate negative supply at the interface. The family description identifies single +5V operation, while the device-specific listing identifies a 5V supply voltage. Confirm absolute supply limits and decoupled operating conditions against the manufacturer electrical-characteristics table before finalizing a circuit.
How many RS-232 drivers and receivers does MAX211ECWI+ have?
The MAX211ECWI+ contains four RS-232 transmit drivers and five receive channels. This 4/5 organization lets one interface IC support several outbound commands or control signals while monitoring up to five incoming signals. The distributor product listing identifies the MAX211 family as a 4/5 full RS-232 transceiver. Each driver and receiver should still be checked for enable, input-state, and loading requirements in the datasheet pin and truth-table descriptions.
What package does MAX211ECWI+ use?
The MAX211ECWI+ uses a 28-pin SOIC package identified as 28-SOIC or WSOIC in the device listings. The package is a surface-mount component with a listed width of 7.50mm. It is substantially larger than the 16-pin and 20-pin RS-232 transceivers used in many newer designs. PCB footprints, land patterns, and assembly clearances should be based on the manufacturer package drawing rather than inferred from a generic SOIC outline.
What is the operating temperature range of MAX211ECWI+?
The MAX211ECWI+ is specified for an operating-temperature range of 0C to 70C. That makes it a commercial-temperature option within the MAX211E family. A comparison record identifies MAX211EEWI+ as extending from -40C to 85C, demonstrating why the full ordering code must be checked rather than assuming every MAX211E variant has the same rating. Industrial equipment operating outside 0C to 70C should use a part with an appropriate temperature grade.
What ESD protection does MAX211ECWI+ provide?
The MAX211ECWI+ provides ±15kV ESD protection on the applicable RS-232 interface pins. The device listing describes it as a 15kV ESD-protected, 5V RS-232 transceiver. This rating should not be interpreted as unrestricted immunity for every system pin or as proof of compliance with an unspecified industrial ESD standard. Apply the manufacturer pin classifications and system-level grounding recommendations when defining the external protection and enclosure strategy.
Where can I download the MAX211ECWI+ datasheet PDF?
The official MAX211E product page is the appropriate starting point for the MAX211ECWI+ datasheet and package information. The MAX211ECWI+ ordering code falls within the MAX211E/MAX213E/MAX241E product family covered by that page. Third-party datasheet indexes also link to manufacturer PDF documents, but the Analog Devices page should be used as the primary source for revision-controlled documentation and the exact ordering-code interpretation.
Where can I find the MAX211ECWI+ pinout?
The MAX211ECWI+ pin assignment is documented in the pin-description section of the manufacturer MAX211E datasheet. It is a 28-pin device with power, ground, charge-pump capacitor, driver-output, receiver-input, and enable-related connections. Use the pin-description table and package drawing to assign tracks because generic RS-232 transceiver diagrams can differ in enable logic and channel allocation. Do not derive a complete 28-pin map from the distributor summary alone.
What external capacitors does MAX211ECWI+ require?
The MAX211ECWI+ requires four external 0.1uF capacitors for its charge-pump circuit. According to the family description, these capacitors are used with the integrated charge-pump voltage converter for single +5V operation. Place each capacitor on the exact nodes specified by the manufacturer datasheet and keep the associated traces short. Incorrect capacitance or long charge-pump traces can impair startup behavior and the bipolar voltage used by the transmit drivers.
Is the MAX211ECWI+ the same as MAX211CWI+?
No, the MAX211ECWI+ and MAX211CWI+ have different ordering codes and should be checked for their specific grade differences. Both are described as +5V RS-232 transceivers in 28-pin WSOIC packages using four external 0.1uF capacitors, so their functional architecture is closely related. The MAX211ECWI+ is specified for 0C to 70C, while the complete temperature and qualification requirements for MAX211CWI+ must be confirmed from its own datasheet before substitution.
What is the best drop-in replacement for MAX211ECWI+?
The MAX211CWI+ is the closest same-family candidate identified for a possible drop-in replacement because it uses the same 28-pin WSOIC format, 5V supply, 4/5 transceiver organization, and four external 0.1uF capacitors. A valid replacement still requires matching enable functions, channel assignments, electrical limits, and temperature range. MAX211EWI+ and MAX211EEWI+ are additional family alternatives whose temperature grades differ from the commercial MAX211ECWI+.
MAX211ECWI+ vs MAX211EEWI+ — which is better for industrial equipment?
The MAX211EEWI+ is generally the better choice when the equipment must operate below 0C or above 70C, because it is identified as having a -40C to 85C range. The MAX211ECWI+ retains a 0C to 70C specification. Temperature capability is only one selection criterion: also verify the package footprint, enable configuration, electrical limits, channel functions, and lifecycle requirements before replacing one ordering code with the other.
When should I choose MAX211ECWI+ over MAX211EWI+?
Choose the MAX211ECWI+ when the design operates within the commercial 0C to 70C range and requires the exact MAX211ECWI+ ordering code. Choose a wider-temperature MAX211E variant only when colder or hotter operating conditions require it. Because both devices appear to retain the 28-pin SOIC architecture, package compatibility may be straightforward, but function and grade differences must be reviewed in the manufacturer documentation before a substitution.
Is MAX211ECWI+ suitable for a five-port RS-232 controller?
The MAX211ECWI+ is suitable for many four-transmit, five-receive RS-232 controller designs. Its four drivers can support four outbound signals, while five receivers can monitor five inbound lines from connected equipment. A full RS-232 implementation can also require hardware handshaking, modem-control signals, and logic-level translation outside the main transceiver. Count the complete interface requirements and review the data-sheet logic diagram before assigning all five receiver channels.
Where can I buy MAX211ECWI+ and check its lead time?
Use the Request a Quote form on this page to request current MAX211ECWI+ pricing, stock, minimum order quantity, and lead time. Quote-based ordering prevents a stale price or availability statement from being presented as current. For design planning, confirm the exact 28-SOIC suffix, commercial 0C to 70C temperature range, 4/5 channel organization, and required 0.1uF charge-pump capacitors before requesting the production quantity.
What is the price of MAX211ECWI+?
The current MAX211ECWI+ price depends on order quantity, packaging, market conditions, and component availability. Submit the required part number and quantity through the Request a Quote form on this page for a current quotation. Engineering selection should not depend on a historical price: verify lifecycle status, date codes, package suffix, and temperature grade along with the commercial quotation before committing the part to a new production design.
Is MAX211ECWI+ in stock?
Current MAX211ECWI+ stock should be checked through the Request a Quote form on this page rather than inferred from an older inventory page. Include the required quantity, approved date-code policy, and delivery target with the request. The part uses a 28-SOIC package and is specified for 0C to 70C, so procurement should also ensure that the offered suffix and grade match the production BOM exactly.

Engineering reference data for MAX211ECWI+ — comparison, design guidance, and compliance information.

Selection Guide

Choose the MAX211ECWI+ when a design requires a 28-SOIC RS-232 interface with four drivers, five receivers, a single 5V supply, four external 0.1uF charge-pump capacitors, 15kV ESD protection, and a 0C to 70C operating range. The MAX211CWI+ is a closely related same-family candidate when its exact grade and function configuration meet the design. Use MAX211EWI+ when its documented temperature grade is preferable, and MAX211EEWI+ for the identified -40C to 85C range. MAX211ECWI is the base ordering-code form, while MAX211ECWI+T is the tape-and-reel ordering option. For all candidates, verify the pin description, enable functions, channel assignments, electrical limits, package drawing, and lifecycle status before treating the substitution as drop-in.

Comparison with Alternatives

Parameter This Product MAX211CWI+ MAX211EWI+ MAX211EEWI+ MAX211ECWI MAX211ECWI+T
Package 28-SOIC (WSOIC) 28-SOIC (WSOIC) 28-SOIC (WSOIC) 28-SOIC (WSOIC) 28-SOIC (WSOIC) 28-SOIC (WSOIC)
Brand Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated Maxim Integrated
Supply Voltage 5V 5V 5V 5V 5V 5V
Transceiver Configuration 4 drivers / 5 receivers 4 drivers / 5 receivers 4 drivers / 5 receivers 4 drivers / 5 receivers 4 drivers / 5 receivers 4 drivers / 5 receivers
Communication Standard RS-232 and V.28 RS-232 and V.28 RS-232 and V.28 RS-232 and V.28 RS-232 and V.28 RS-232 and V.28
External Charge-Pump Capacitors 4 x 0.1uF 4 x 0.1uF 4 x 0.1uF 4 x 0.1uF 4 x 0.1uF 4 x 0.1uF

Key Differentiators

  • Four transmit drivers and five receive channels in one interface IC (vs MAX3232IPW)
  • 15kV ESD protection on the RS-232 interface (vs MAX211CWI+)
  • Single 5V interface operation with integrated charge pump (vs MAX211EEWI+)

Design Notes

Place the four 0.1uF charge-pump capacitors exactly at the nodes shown in the manufacturer application circuit. Keep each capacitor-to-pin trace short and minimize loop area because the charge-pump stage generates the bipolar voltage used by the RS-232 drivers. Avoid routing these nodes beneath the package or through long shared paths. Confirm capacitor tolerance, voltage rating, and dielectric requirements from the datasheet before releasing the PCB layout.

Separate RS-232 driver outputs and receiver inputs from sensitive analog or high-speed signal paths. Although the interface uses differential signaling internally, the external connector and cable can couple transient energy into nearby circuitry. Use a solid ground plane, short ground returns, and a sensible separation between the transceiver and precision analog sections. Apply the package pin table to assign connector-side nets; do not infer pin functions from another RS-232 device.

Do not substitute the charge-pump capacitors with a different capacitance without checking the manufacturer recommendation, and do not omit the four external capacitors because the charge pump is integrated. Also verify that the MAX211E suffix preserves the required temperature grade. MAX211ECWI+ is listed for 0C to 70C, while MAX211EEWI+ is identified as -40C to 85C. A same-footprint substitute is not automatically acceptable when environmental limits or enable functions differ.

Treat the RS-232 connector and cable as an electromagnetic-interference entry point. Keep the driver output paths short, provide a continuous return path, and avoid broad copper that can increase capacitive coupling to adjacent signals. The ±15kV ESD rating applies to protected interface connections and should be supported by chassis grounding, surge protection, and cable design where the equipment will be exposed to severe transients. Do not use the IC rating as a substitute for a complete enclosure and protective-network design.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The device is described as an RS-232 transceiver with ±15kV ESD protection. No specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration was identified for this ordering code.

Related Searches

MAX211ECWI+ datasheet MAX211ECWI+ pinout MAX211ECWI+ datasheet pdf MAX211ECWI+ specifications MAX211ECWI+ price MAX211ECWI+ stock Maxim Integrated MAX211ECWI+ MAX211ECWI+ 28-SOIC MAX211ECWI+ RS-232 transceiver MAX211ECWI+ 15kV ESD MAX211ECWI+ replacement MAX211ECWI+ vs MAX211EEWI+ MAX211ECWI+ application circuit MAX211ECWI+ equivalent

Related Components & Terms

Maxim Integrated MAX211ECWI+ MAX211CWI+ MAX211EWI+ MAX211EEWI+ MAX211ECWI MAX211ECWI+T RS-232 transceiver RS-232 V.28 CMOS line driver line receiver charge-pump voltage converter single +5V operation 15kV ESD protection 0.1uF capacitor 28-SOIC WSOIC surface mount commercial temperature grade industrial communication point-of-sale equipment data acquisition test and measurement
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details