Analog Devices

MAX3232EEUP+ 3V RS-232 Transceiver | Analog Devices

MPN: MAX3232EEUP+ ✓ सक्रिय
3.0V to 5.5V Vdss Down to 10nA Id 20-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX3232EEUP+ अवलोकन

The Analog Devices MAX3232EEUP+ is a true RS-232 transceiver integrated circuit operating from 3.0V to 5.5V, with data rates up to 1Mbps and ±15kV ESD protection on the serial-port connections. The device combines two line drivers and two line receivers with integrated charge-pump circuitry, providing a compact interface between a digital controller and an RS-232 connector.

An RS-232 transceiver is a semiconductor interface device that converts logic-level signals into RS-232 electrical levels and converts received RS-232 levels back into logic signals. The MAX3232EEUP+ belongs to the RS-232 interface IC and communication-interface hierarchy, making it suitable for embedded systems, industrial control equipment, instrumentation, and legacy serial communications.

The main electrical characteristics are a 3.0V to 5.5V supply range, operation up to 1Mbps, ±15kV ESD protection, and operation with supply current down to 10nA as identified by the manufacturer’s product information. The integrated charge-pump design eliminates the need for an external RS-232 line driver in typical point-to-point serial links.

The MAX3232EEUP+ is specified for low-power operation and true RS-232 signal levels. Its receiver and driver arrangement supports two transmit channels and two receive channels, allowing one IC to handle a bidirectional RS-232 interface when the system uses separate driver and receiver connections. The TSSOP-20 package supports compact surface-mount PCB layouts and automated assembly.

Typical applications include industrial serial controllers, test and measurement equipment, point-of-sale systems, service interfaces, and communication links to legacy RS-232 peripherals. In these systems, the MAX3232EEUP+ provides the electrical interface between a low-voltage controller and an external connector while adding ESD protection for exposed serial lines.

Designers should verify connector pin assignments, line-driver and line-receiver polarity, external charge-pump capacitor values, and interface timing against the manufacturer datasheet. The device must also be checked against the required RS-232 voltage levels, cable length, data rate, and system grounding arrangement.

This page combines the manufacturer product description, distributor listings, packaging information, and practical interface-design guidance to support component selection and RS-232 implementation planning.

के लिए ड्रॉप-इन विकल्प MAX3232EEUP+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3232EEUP+ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Maximum Data Rate, Supply Voltage Range, ESD Protection, Product Type, Package.

Analog Devices
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
ESD Protection: ±15 kV
इसके साथ तुलना करें MAX3232EEUP+ →
Analog Devices
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
ESD Protection: ±15 kV
इसके साथ तुलना करें MAX3232EEUP+ →
Analog Devices
Maximum Data Rate: 250 kbps
Supply Voltage Range: 3 V to 5.5 V
इसके साथ तुलना करें MAX3232EEUP+ →
Analog Devices
Maximum Data Rate: 1 Mbps
Supply Voltage Range: 3.0 V to 5.5 V
ESD Protection: ±15 kV
इसके साथ तुलना करें MAX3232EEUP+ →

MAX3232EEUP+T

✅ ड्रॉप-इन
📦 20-pin TSSOP
Same MAX3232EEUP+ family and 20-pin TSSOP package; +T ordering suffix may change packing configuration

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX3232EEUP+TG071

✅ ड्रॉप-इन
📦 20-pin TSSOP
Same MAX3232EEUP+ family and 20-pin TSSOP package; TG071 is an orderable packing suffix

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX3232EEUP+ विशेषताएं

Product Type RS-232 transceiver
Number of Drivers 2
Number of Receivers 2
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 1Mbps
ESD Protection ±15kV
Low Supply Current Down to 10nA
Interface Standard True RS-232
Transceiver Configuration 2/2 full-duplex
पैकेज 20-pin TSSOP
माउंटिंग प्रकार Surface mount
Charge Pump Integrated dual charge-pump circuit
Protection Scope RS-232 serial-port connections
Product Page Listing MAX3232 production
Manufacturer Analog Devices

MAX3232EEUP+ 20-pin tssop पिन कॉन्फ़िगरेशन गाइड

MAX3232EEUP+ (20-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX3232EEUP+ के लिए 20-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX3232EEUP+.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX3232EEUP+ के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial serial controllers, Test and measurement equipment, Point-of-sale and service terminals, Legacy peripheral communication, Building access and security equipment, Portable and embedded serial interfaces.

🏭

Industrial serial controllers

The MAX3232EEUP+ fits industrial equipment that communicates with RS-232 service ports, controllers, or legacy peripherals. Its 3.0V-to-5.5V supply range allows operation alongside modern 3.3V digital systems, while the 1Mbps data-rate capability provides more margin than many low-speed serial-control links. The two drivers and two receivers support a full RS-232 channel arrangement. The ±15kV ESD protection is particularly useful on equipment where the serial cable is exposed to user access or industrial electrical noise. Designers should use the manufacturer’s charge-pump capacitor recommendations and preserve the specified layout around the interface and protection network.

🔧

Test and measurement equipment

The MAX3232EEUP+ is appropriate for instrumentation that needs a compact, reliable RS-232 control or data interface. A 3.3V or 5V instrument can use the transceiver’s 3.0V-to-5.5V operating range without an external line-driver IC, and the integrated charge pump reduces the number of discrete interface functions. The 1Mbps maximum rate supports instrument control protocols that require more bandwidth than a slow legacy UART application. For laboratory or bench equipment, the ±15kV ESD rating helps protect the interface when connected to external cables. Use short, well-routed traces and follow the datasheet’s recommended capacitor and grounding arrangement.

🖥️

Point-of-sale and service terminals

The MAX3232EEUP+ can be used in point-of-sale terminals and service equipment that retains an RS-232 connection for printers, scanners, or configuration interfaces. Its two-driver, two-receiver arrangement allows a single IC to implement a full duplex RS-232 port, while the low-power 3.0V-to-5.5V operation fits compact embedded systems. The integrated charge-pump circuitry avoids a separate RS-232 driver in standard designs. ESD protection is valuable because service connectors may be touched during installation or maintenance. Confirm the connector wiring, logic polarity, and charge-pump capacitor values in the manufacturer datasheet before release, and check the exact operating-temperature requirements for the terminal enclosure.

🌐

Legacy peripheral communication

The MAX3232EEUP+ is suitable for embedded systems that must connect a modern controller to an older RS-232 peripheral. It provides the electrical conversion required between logic-level UART signals and true RS-232 levels, with two drivers and two receivers available for separate transmit and receive paths. The 1Mbps capability allows operation across a broad range of legacy serial protocols, while the 3.0V-to-5.5V supply range accommodates both 3.3V and 5V controller platforms. The ±15kV ESD protection helps withstand electrostatic discharge on an external cable connection. Verify protocol timing, signal polarity, cable length, and connector pin numbering before deployment.

🎥

Building access and security equipment

The MAX3232EEUP+ can support RS-232 configuration or diagnostic links in access-control and security equipment where the product needs a wired service interface alongside Ethernet, wireless, or other communications. The 3.0V-to-5.5V operating range allows direct pairing with common embedded-controller supply domains, and the two transmit and two receive channels cover a standard full-duplex serial port. The device’s ±15kV ESD protection is helpful for equipment installed near frequently accessed service connectors. Because security devices may be placed in electrically noisy environments, follow the datasheet guidance for bypass capacitors, grounding, connector protection, and cable routing, and verify the required environmental temperature range.

📱

Portable and embedded serial interfaces

The MAX3232EEUP+ fits portable and embedded systems that require an RS-232 interface without adding a separate line-driver circuit. Its low-power operation and ability to work from 3.0V to 5.5V are useful in compact equipment, while the TSSOP-20 package supports surface-mount assembly. The 1Mbps rate provides flexibility for configuration downloads, diagnostic traffic, and communication with legacy peripherals. The ±15kV ESD protection is important when the port is exposed through an enclosure connector. The TSSOP footprint should be placed close to the connector and protection components, with the charge-pump capacitors positioned according to the manufacturer’s layout guidance to minimize board area and improve signal integrity.

अनुशंसित उत्पादों का सारांश

MAX3232EEUP+T Same MAX3232EEUP+ family in 20-pin TSSOP उपयोग में: Industrial serial controllers, Point-of-sale and service terminals, Legacy peripheral communication, Building access and security equipment, Portable and embedded serial interfaces MAX3232EESE+T MAX3232E family RS-232 interface उपयोग में: Industrial serial controllers, Test and measurement equipment, Legacy peripheral communication, Building access and security equipment MAX3232EEUP+TG071 Same MAX3232EEUP+ family in 20-pin TSSOP उपयोग में: Test and measurement equipment, Point-of-sale and service terminals, Portable and embedded serial interfaces
What is the operating voltage of MAX3232EEUP+?
The MAX3232EEUP+ operates from 3.0V to 5.5V. Analog Devices identifies the MAX3232 family as a 3.0V-to-5.5V, low-power, true RS-232 transceiver, making it suitable for systems using either 3.3V or 5V logic rails. Confirm the controller and interface voltage requirements in the design.
What is the maximum data rate of MAX3232EEUP+?
The MAX3232EEUP+ supports data rates up to 1Mbps. This performance is identified in the Analog Devices MAX3232 product description and the manufacturer datasheet materials. Actual throughput depends on the host interface, cable conditions, grounding, and the connected RS-232 equipment.
Does MAX3232EEUP+ include ESD protection?
Yes. The MAX3232EEUP+ provides ±15kV ESD protection on the RS-232 serial-port connections. The protection is intended for externally accessible serial lines and helps improve reliability in industrial, laboratory, and equipment environments where cables may be exposed to electrostatic discharge.
How many RS-232 drivers and receivers are in MAX3232EEUP+?
The MAX3232EEUP+ contains two line drivers and two line receivers, also described as a 2/2 full-duplex transceiver. The two-driver, two-receiver arrangement supports a complete bidirectional RS-232 interface when the system assigns separate transmit and receive lines.
Where can I download the MAX3232EEUP+ datasheet PDF?
The official MAX3232 product page at Analog Devices provides the current MAX3232 data sheet, product documentation, selection information, and related tools. The MAX3232EEUP+ is the 20-pin TSSOP ordering variant, so use the pin-description table, electrical characteristics, and ordering information for that package when assigning PCB connections.
Where can I find the MAX3232EEUP+ pinout?
The MAX3232EEUP+ pinout is documented in the manufacturer’s MAX3232 data-sheet pin-description table and package drawing. The verified distributor listing identifies the device as a 20-pin TSSOP. Use the Analog Devices package drawing to confirm numbering, exposed-pad details if applicable, and the exact driver, receiver, charge-pump, and ground assignments.
What can replace the MAX3232EEUP+?
A valid replacement must use the same 20-pin TSSOP footprint and provide compatible two-driver, two-receiver RS-232 operation, a compatible 3.0V-to-5.5V supply range, and acceptable ESD and data-rate specifications. The MAX3232EEUP+T listing is a closely related 20-TSSOP ordering variant, but packaging suffix differences should be checked against the procurement BOM before substitution.
Is MAX3232EEUP+ the same as MAX3232EEUP+T?
MAX3232EEUP+ and MAX3232EEUP+T are closely related Maxim Integrated ordering names listed for the MAX3232EEUP+ family, with both identified as 2/2 transceivers in 20-pin TSSOP packages. The plus and plus-T suffix conventions should still be checked in the manufacturer ordering table because reel, tube, or other packing details can differ.
Is MAX3232EEUP+ suitable for industrial RS-232 equipment?
The MAX3232EEUP+ is suitable for many industrial and instrumentation RS-232 interfaces because it supports a 3.0V-to-5.5V supply, true RS-232 operation, 1Mbps data rates, and ±15kV ESD protection. The final suitability decision should also account for operating temperature, isolation requirements, grounding, cable length, and the specific industrial connector environment.
What is the best Texas Instruments equivalent for MAX3232EEUP+?
The Texas Instruments MAX3232E is identified as a ±15kV ESD-protected, 3.0V-to-5.5V, up-to-1Mbps true RS-232 transceiver with two drivers and two receivers. It is a candidate for cross-brand evaluation, but a drop-in decision still requires confirmation of the exact TSSOP package, pin assignments, operating-temperature grade, and supply-current behavior.
When should I choose MAX3232EEUP+ instead of MAX3232EEUP+T?
Choose the exact suffix required by the production BOM and manufacturer ordering information. Both are associated with the MAX3232EEUP+ 20-pin TSSOP device in distributor listings, so the distinction is generally packaging or order-code related. Engineers should select the part number that matches the required shipping format and production configuration rather than changing the suffix without checking the datasheet ordering table.
Can MAX3232EEUP+ replace a MAX3232E interface?
The MAX3232EEUP+ is a member of the MAX3232E family and is designed to provide the same general two-driver, two-receiver RS-232 interface function. Before replacing an existing MAX3232E design, verify the exact package, pinout, temperature grade, capacitor recommendations, shutdown behavior, and ESD requirements against both devices’ manufacturer documentation.
Does MAX3232EEUP+ need external charge-pump capacitors?
The MAX3232 family uses an integrated charge-pump circuit, but the manufacturer’s application guidance should be followed for the required external capacitor values and placement. The charge-pump capacitors are external components even though the charge-pump circuitry is integrated. Consult the datasheet’s typical application circuit and layout guidance before finalizing the PCB.
How much does MAX3232EEUP+ cost?
Current pricing should be requested through the Request a Quote form on this page because available quantities, suffix, packaging, and market conditions can change the commercial terms. The manufacturer’s MAX3232 product page also provides sample and purchasing tools. The page’s structured pricing area should be used for the latest quote.
Is MAX3232EEUP+ in stock and what is its lead time?
Stock and lead time should be confirmed through the Request a Quote form on this page for the exact MAX3232EEUP+ ordering code and required quantity. The manufacturer lists the MAX3232 family as production, while distributor availability can vary by package, region, and order volume. Provide the target quantity and delivery requirements in the quote request.

के लिए इंजीनियरिंग संदर्भ डेटा MAX3232EEUP+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MAX3232EEUP+ when the design requires a 20-pin TSSOP RS-232 interface with two drivers, two receivers, 3.0V-to-5.5V operation, and up to 1Mbps data rates. Its integrated ±15kV ESD protection is useful for externally accessible serial connectors. The listed MAX3232EEUP+T and MAX3232EEUP+TG071 are closely related 20-pin TSSOP ordering variants, but their suffix-specific packing and order-code requirements should be checked against the production BOM. Do not select MAX3232EESE+T or MAX3232EEUE+ as drop-in replacements without a PCB and pinout change, because the comparison information identifies different package pin counts. When comparing with the Texas Instruments MAX3232E, verify package, pin assignments, temperature grade, and capacitor requirements as well as the common voltage, data-rate, and ESD specifications.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX3232EEUP+T MAX3232EEUP+TG071
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices
Supply Voltage Range 3.0V to 5.5V 3.0V to 5.5V 3.0V to 5.5V
Maximum Data Rate 1Mbps 1Mbps 1Mbps
ESD Protection ±15kV ±15kV ±15kV
Number of Drivers 2 2 2
Number of Receivers 2 2 2
Interface Standard True RS-232 True RS-232 True RS-232
Low Supply Current Down to 10nA Down to 10nA Down to 10nA

मुख्य विशेषताएँ

  • Wide low-voltage supply range (बनामMAX3232EESE+T)
  • Integrated ESD protection (बनामMAX3232EEUP+T)
  • Two-driver, two-receiver full-duplex interface (बनामMAX3232EEUP+TG071)

डिज़ाइन नोट्स

Place the MAX3232EEUP+ close to the RS-232 connector and follow the manufacturer’s recommended layout for the charge-pump capacitors, supply bypass, and driver/receiver routing. Keep the charge-pump capacitor loop compact because long traces can increase radiated noise and reduce the effectiveness of the internal charge-pump circuitry. Confirm the exposed-pad or thermal-pad requirements from the official package drawing.

Keep the logic-side UART traces away from the RS-232 driver outputs and connector pins, and route the interface ground according to the datasheet’s reference layout. The MAX3232 family is a low-voltage logic-to-RS-232 interface, so the output driver pins must connect to the connector-side network rather than directly to a microcontroller UART. Verify every driver and receiver connection against the package pin description before fabrication.

Do not substitute MAX3232EESE+T or MAX3232EEUE+ without checking the package. The verified comparison information identifies MAX3232EESE+T as a 16-pin SOIC and MAX3232EEUE+ as a 16-pin TSSOP, while MAX3232EEUP+ is a 20-pin TSSOP. Those alternatives are not pin-compatible with the target package and therefore are not drop-in replacements for this BOM position.

Use the specified charge-pump capacitor values and place input and output bypass capacitors close to their associated pins. The integrated charge pump generates internal switching energy, so careful grounding and return-current management help prevent noise from coupling into nearby analog or processor circuitry. If the RS-232 cable leaves the enclosure, retain the specified ESD-protection arrangement and verify it against the system-level ESD requirements.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The verified manufacturer product page identifies the MAX3232 family as production but does not provide explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification values for this exact ordering code.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX3232EEUP+ datasheet MAX3232EEUP+ datasheet pdf MAX3232EEUP+ pinout MAX3232EEUP+ equivalent MAX3232EEUP+ replacement MAX3232EEUP+ price MAX3232EEUP+ stock Analog Devices MAX3232EEUP+ MAX3232EEUP+ 20-TSSOP MAX3232EEUP+ RS-232 transceiver MAX3232EEUP+ vs MAX3232EESE+T MAX3232EEUP+ 3.0V 5.5V 1Mbps MAX3232EEUP+ industrial serial interface

संबंधित कंपोनेंट्स और शब्द

Analog Devices MAX3232EEUP+ MAX3232EEUP+T MAX3232EEUP+TG071 MAX3232E MAX3232EESE+T RS-232 transceiver RS-232 interface IC line driver line receiver true RS-232 charge-pump circuit dual charge pump 3.0V to 5.5V 1Mbps data rate ±15kV ESD protection 20-pin TSSOP TSSOP package family surface-mount package industrial control equipment test and measurement equipment legacy serial communication embedded systems Digital transceiver communication interface IC
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें