MAX3232EEUP+ 3V RS-232 Transceiver | Analog Devices
MPN: MAX3232EEUP+ ✓ AktifMAX3232EEUP+ Genel Bakış
An RS-232 transceiver is a semiconductor interface device that converts logic-level signals into RS-232 electrical levels and converts received RS-232 levels back into logic signals. The MAX3232EEUP+ belongs to the RS-232 interface IC and communication-interface hierarchy, making it suitable for embedded systems, industrial control equipment, instrumentation, and legacy serial communications.
The main electrical characteristics are a 3.0V to 5.5V supply range, operation up to 1Mbps, ±15kV ESD protection, and operation with supply current down to 10nA as identified by the manufacturer’s product information. The integrated charge-pump design eliminates the need for an external RS-232 line driver in typical point-to-point serial links.
The MAX3232EEUP+ is specified for low-power operation and true RS-232 signal levels. Its receiver and driver arrangement supports two transmit channels and two receive channels, allowing one IC to handle a bidirectional RS-232 interface when the system uses separate driver and receiver connections. The TSSOP-20 package supports compact surface-mount PCB layouts and automated assembly.
Typical applications include industrial serial controllers, test and measurement equipment, point-of-sale systems, service interfaces, and communication links to legacy RS-232 peripherals. In these systems, the MAX3232EEUP+ provides the electrical interface between a low-voltage controller and an external connector while adding ESD protection for exposed serial lines.
Designers should verify connector pin assignments, line-driver and line-receiver polarity, external charge-pump capacitor values, and interface timing against the manufacturer datasheet. The device must also be checked against the required RS-232 voltage levels, cable length, data rate, and system grounding arrangement.
This page combines the manufacturer product description, distributor listings, packaging information, and practical interface-design guidance to support component selection and RS-232 implementation planning.
Drop-in alternatifler için MAX3232EEUP+ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX3232EEUP+ (aynı form faktörü ve ayağa oturma) — farklı olan Maximum Data Rate, Supply Voltage Range, ESD Protection, Product Type, Package.
MAX3232EEUP+T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX3232EEUP+TG071
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
MAX3232EEUP+ Özellikler
| Product Type | RS-232 transceiver |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Supply Voltage Range | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps |
| ESD Protection | ±15kV |
| Low Supply Current | Down to 10nA |
| Interface Standard | True RS-232 |
| Transceiver Configuration | 2/2 full-duplex |
| Paket | 20-pin TSSOP |
| Montaj Türü | Surface mount |
| Charge Pump | Integrated dual charge-pump circuit |
| Protection Scope | RS-232 serial-port connections |
| Product Page Listing | MAX3232 production |
| Manufacturer | Analog Devices |
MAX3232EEUP+ 20-pin tssop Pin Yapısı Kılavuzu
MAX3232EEUP+ (20-pin tssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX3232EEUP+.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX3232EEUP+ için uygundur 6 uygulamas: Industrial serial controllers, Test and measurement equipment, Point-of-sale and service terminals, Legacy peripheral communication, Building access and security equipment, Portable and embedded serial interfaces.
Industrial serial controllers
The MAX3232EEUP+ fits industrial equipment that communicates with RS-232 service ports, controllers, or legacy peripherals. Its 3.0V-to-5.5V supply range allows operation alongside modern 3.3V digital systems, while the 1Mbps data-rate capability provides more margin than many low-speed serial-control links. The two drivers and two receivers support a full RS-232 channel arrangement. The ±15kV ESD protection is particularly useful on equipment where the serial cable is exposed to user access or industrial electrical noise. Designers should use the manufacturer’s charge-pump capacitor recommendations and preserve the specified layout around the interface and protection network.
Önerilen
Test and measurement equipment
The MAX3232EEUP+ is appropriate for instrumentation that needs a compact, reliable RS-232 control or data interface. A 3.3V or 5V instrument can use the transceiver’s 3.0V-to-5.5V operating range without an external line-driver IC, and the integrated charge pump reduces the number of discrete interface functions. The 1Mbps maximum rate supports instrument control protocols that require more bandwidth than a slow legacy UART application. For laboratory or bench equipment, the ±15kV ESD rating helps protect the interface when connected to external cables. Use short, well-routed traces and follow the datasheet’s recommended capacitor and grounding arrangement.
Önerilen
Point-of-sale and service terminals
The MAX3232EEUP+ can be used in point-of-sale terminals and service equipment that retains an RS-232 connection for printers, scanners, or configuration interfaces. Its two-driver, two-receiver arrangement allows a single IC to implement a full duplex RS-232 port, while the low-power 3.0V-to-5.5V operation fits compact embedded systems. The integrated charge-pump circuitry avoids a separate RS-232 driver in standard designs. ESD protection is valuable because service connectors may be touched during installation or maintenance. Confirm the connector wiring, logic polarity, and charge-pump capacitor values in the manufacturer datasheet before release, and check the exact operating-temperature requirements for the terminal enclosure.
Önerilen
Legacy peripheral communication
The MAX3232EEUP+ is suitable for embedded systems that must connect a modern controller to an older RS-232 peripheral. It provides the electrical conversion required between logic-level UART signals and true RS-232 levels, with two drivers and two receivers available for separate transmit and receive paths. The 1Mbps capability allows operation across a broad range of legacy serial protocols, while the 3.0V-to-5.5V supply range accommodates both 3.3V and 5V controller platforms. The ±15kV ESD protection helps withstand electrostatic discharge on an external cable connection. Verify protocol timing, signal polarity, cable length, and connector pin numbering before deployment.
Önerilen
Building access and security equipment
The MAX3232EEUP+ can support RS-232 configuration or diagnostic links in access-control and security equipment where the product needs a wired service interface alongside Ethernet, wireless, or other communications. The 3.0V-to-5.5V operating range allows direct pairing with common embedded-controller supply domains, and the two transmit and two receive channels cover a standard full-duplex serial port. The device’s ±15kV ESD protection is helpful for equipment installed near frequently accessed service connectors. Because security devices may be placed in electrically noisy environments, follow the datasheet guidance for bypass capacitors, grounding, connector protection, and cable routing, and verify the required environmental temperature range.
Önerilen
Portable and embedded serial interfaces
The MAX3232EEUP+ fits portable and embedded systems that require an RS-232 interface without adding a separate line-driver circuit. Its low-power operation and ability to work from 3.0V to 5.5V are useful in compact equipment, while the TSSOP-20 package supports surface-mount assembly. The 1Mbps rate provides flexibility for configuration downloads, diagnostic traffic, and communication with legacy peripherals. The ±15kV ESD protection is important when the port is exposed through an enclosure connector. The TSSOP footprint should be placed close to the connector and protection components, with the charge-pump capacitors positioned according to the manufacturer’s layout guidance to minimize board area and improve signal integrity.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX3232EEUP+ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX3232EEUP+T | MAX3232EEUP+TG071 |
|---|---|---|---|
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Supply Voltage Range | 3.0V to 5.5V | 3.0V to 5.5V | 3.0V to 5.5V |
| Maximum Data Rate | 1Mbps | 1Mbps | 1Mbps |
| ESD Protection | ±15kV | ±15kV | ±15kV |
| Number of Drivers | 2 | 2 | 2 |
| Number of Receivers | 2 | 2 | 2 |
| Interface Standard | True RS-232 | True RS-232 | True RS-232 |
| Low Supply Current | Down to 10nA | Down to 10nA | Down to 10nA |
Ana Farklılayıcılar
- Wide low-voltage supply range (karşılaştırma:MAX3232EESE+T)
- Integrated ESD protection (karşılaştırma:MAX3232EEUP+T)
- Two-driver, two-receiver full-duplex interface (karşılaştırma:MAX3232EEUP+TG071)
Tasarım Notları
Place the MAX3232EEUP+ close to the RS-232 connector and follow the manufacturer’s recommended layout for the charge-pump capacitors, supply bypass, and driver/receiver routing. Keep the charge-pump capacitor loop compact because long traces can increase radiated noise and reduce the effectiveness of the internal charge-pump circuitry. Confirm the exposed-pad or thermal-pad requirements from the official package drawing.
Keep the logic-side UART traces away from the RS-232 driver outputs and connector pins, and route the interface ground according to the datasheet’s reference layout. The MAX3232 family is a low-voltage logic-to-RS-232 interface, so the output driver pins must connect to the connector-side network rather than directly to a microcontroller UART. Verify every driver and receiver connection against the package pin description before fabrication.
Do not substitute MAX3232EESE+T or MAX3232EEUE+ without checking the package. The verified comparison information identifies MAX3232EESE+T as a 16-pin SOIC and MAX3232EEUE+ as a 16-pin TSSOP, while MAX3232EEUP+ is a 20-pin TSSOP. Those alternatives are not pin-compatible with the target package and therefore are not drop-in replacements for this BOM position.
Use the specified charge-pump capacitor values and place input and output bypass capacitors close to their associated pins. The integrated charge pump generates internal switching energy, so careful grounding and return-current management help prevent noise from coupling into nearby analog or processor circuitry. If the RS-232 cable leaves the enclosure, retain the specified ESD-protection arrangement and verify it against the system-level ESD requirements.
Uyumluluk Bilgisi
The verified manufacturer product page identifies the MAX3232 family as production but does not provide explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification values for this exact ordering code.