Analog Devices

MAX3243EETJ+T - 3/5 RS-232 Transceiver, 250kbps | Analog Devices

MPN: MAX3243EETJ+T ✓ सक्रिय
3.0 V to 5.5 V Vdss 1 A maximum Id 32-pin TQFN, 7 mm x 7 mm Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX3243EETJ+T अवलोकन

The Analog Devices MAX3243EETJ+T is a 3.0V to 5.5V powered RS-232 interface transceiver with three transmit channels and five receive channels, supporting data rates up to 250kbps. It is packaged in a 32-pin TQFN with a 7 mm by 7 mm body and an exposed thermal pad for improved heat dissipation. The device includes automatic shutdown and wakeup functions, making it suitable for systems where the interface must remain available without continuously consuming power.

An RS-232 transceiver is a signal-interface integrated circuit that converts between single-ended, bipolar RS-232 logic levels and CMOS/TTL logic levels used by microcontrollers, computers, and industrial controllers. The MAX3243E family belongs to the interface IC hierarchy: RS-232 transceiver, communications interface, and interface integrated circuit. It provides level translation, noise immunity, and electrical protection in one compact package.

The MAX3243EETJ+T is specified for a 3.0V to 5.5V supply range, 15kV ESD protection on the RS-232 lines, and operation at rates up to 250kbps. Its three transmitters support point-to-point serial links, while its five receivers can monitor multiple incoming signals. Automatic shutdown reduces supply current when no active transmission is present, and the wakeup circuitry allows the interface to react to incoming serial activity.

Typical uses include industrial control equipment, data acquisition systems, test and measurement instruments, service interfaces, and embedded products that communicate through legacy RS-232 ports. The exposed pad improves heat flow from the package to the PCB, but a proper thermal via and copper-pour layout remain necessary for reliable operation in elevated-temperature environments.

When designing a board around this transceiver, route each RS-232 connector pin directly to the corresponding protection-capable interface pin and keep the ground return path close to the signal traces. Decoupling capacitors should be placed at the supply pins, and the exposed pad should be connected to the ground plane using multiple thermal vias. Review the manufacturer datasheet for the complete pin-description table and application circuit before assigning PCB tracks.

This page combines manufacturer specifications, distributor package information, replacement analysis, and practical PCB guidance to help engineers evaluate the MAX3243EETJ+T for new RS-232 designs and for retrofit work where the original interface device is no longer readily available.

के लिए ड्रॉप-इन विकल्प MAX3243EETJ+T — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MAX3243EETJ+T (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न ESD Protection, Package, Maximum Data Rate, Supply Voltage Range, Receiver Channels.

Analog Devices
ESD Protection: ±15kV
Package: 28-pin SSOP
Maximum Data Rate: 250kbps
इसके साथ तुलना करें MAX3243EETJ+T →
Analog Devices
ESD Protection: ±15 kV
Package: 28-SOIC, 7.50 mm width
Receiver Channels: 5
इसके साथ तुलना करें MAX3243EETJ+T →

MAX3243EEAI+

✅ ड्रॉप-इन
Analog Devices
📦 32-pin TQFN
RS-232 transceiver · 3 channels · 5 channels · Full duplex · 3.0V to 5.5V · 250kbps · ±15kV · RS-232 / EIA/TIA-232

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3243EEWI+T

✅ ड्रॉप-इन
Analog Devices
📦 32-pin TQFN
RS-232 transceiver · 3 · 5 · 3/5 full RS-232 · 3.0 V to 5.5 V · 250 kbps · ±15 kV · 1 µA

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3243EETJ+

✅ ड्रॉप-इन
Analog Devices
📦 32-pin TQFN
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 · 5 · Full duplex · 1µA · ±15kV

कीमत के लिए संपर्क करें

डेटाशीट देखें →

MAX3243EETJ

✅ ड्रॉप-इन
📦 32-pin TQFN
Lead-free termination code differs from the +T tape-and-reel suffix; confirm reel packaging and device marking before using as a procurement substitute

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX3243EETJ+T विशेषताएं

इंटरफ़ेस प्रकार RS-232 transceiver
Number of Transmitters 3
Number of Receivers 5
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
ESD Protection 15 kV
सप्लाई करंट 1 A maximum
Auto-Shutdown Yes
Auto-Wakeup Yes
Duplex Operation Full duplex
पैकेज 32-pin TQFN, 7 mm x 7 mm
Exposed Pad Yes
माउंटिंग प्रकार Surface mount

MAX3243EETJ+T 32-pin tqfn, 7 mm x 7 mm पिन कॉन्फ़िगरेशन गाइड

MAX3243EETJ+T (32-pin tqfn, 7 mm x 7 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX3243EETJ+T के लिए 32-pin tqfn, 7 mm x 7 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX3243EETJ+T.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX3243EETJ+T के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Instrument Control, Data Acquisition Systems, Embedded Console and Service Ports, Point-of-Sale and Peripherals, Test and Measurement Equipment, Medical and Laboratory Equipment.

🏭

Industrial Instrument Control

The MAX3243EETJ+T is appropriate for RS-232 control ports in industrial test equipment, analyzers, and programmable instruments. Its three transmitters and five receivers provide enough channels for command, data, status, and handshake lines without adding multiple interface packages. The 250kbps rate suits short-distance instrument protocols, while the 15kV ESD protection adds transient resilience at connector-facing pins. Use the exposed pad as a ground and thermal connection, and verify the operating temperature range for the enclosure.

📡

Data Acquisition Systems

Use the MAX3243EETJ+T to bridge a controller or embedded processor to multiple RS-232 peripherals in a data-acquisition system. The three transmit channels can support separate command paths, while the five receive channels can collect responses from sensors, fixtures, or auxiliary equipment. Its 3.0V to 5.5V supply range allows integration with both 3.3V and 5V digital systems. Keep the transceiver supply decoupling close to the device and provide a low-impedance ground return beneath the exposed pad.

🖥️

Embedded Console and Service Ports

The MAX3243EETJ+T fits service and maintenance ports that must remain accessible while the main product is running. A dedicated receiver can monitor a remote-control input, and the additional transmit channels can support status reporting or equipment control. Automatic shutdown and wakeup help conserve power in portable or intermittently connected systems. Confirm that the system-level protocol supports the chosen baud rate and that the connector shield or chassis ground is handled according to the enclosure design.

🛒

Point-of-Sale and Peripherals

The MAX3243EETJ+T can support compact peripheral subsystems that use multiple RS-232 links, including printers, scanners, readers, or specialty equipment. The 3/5 channel arrangement allows a single package to handle several unidirectional or handshake-controlled connections. The 250kbps maximum data rate supports many legacy peripheral protocols, but cable length, baud rate, and grounding determine practical link reliability. Use the family information and data sheets for each peripheral before assigning the transmit and receive pins.

🔧

Test and Measurement Equipment

The MAX3243EETJ+T is useful in test and measurement equipment that requires several RS-232 control or status lines in a compact board area. Its exposed-pad TQFN package reduces footprint compared with larger SOIC-style implementations and promotes heat transfer into the PCB. The 15kV ESD rating helps protect interface pins during routine cable connection and disconnection. Validate signal integrity with the actual cable, connector, and grounding arrangement because RS-232 margin depends on the complete channel.

💊

Medical and Laboratory Equipment

The MAX3243EETJ+T can serve as the RS-232 interface in laboratory instruments and medical equipment that expose a legacy service or configuration port. Its multiple receivers allow the host to monitor readiness, alarm, and status lines in addition to the main command channel. Automatic shutdown reduces standby consumption when the port is idle. For medical deployments, confirm the complete device operating-temperature and qualification requirements, and add the isolation and protection required by the applicable system architecture.

What is the MAX3243EETJ+T?
The MAX3243EETJ+T is a 3/5 RS-232 transceiver from Analog Devices, combining three transmit channels, five receive channels, automatic shutdown, and automatic wakeup in a 32-pin TQFN package. According to the manufacturer product page, the MAX3243E family is intended for 3V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. The device operates from 3.0V to 5.5V and supports rates up to 250kbps.
What is the operating voltage of MAX3243EETJ+T?
The MAX3243EETJ+T operates from a 3.0V to 5.5V supply. The Mouser listing identifies the part as a 3.0V to 5.5V RS-232 interface IC with 15kV ESD protection and 250kbps data-rate capability. A 3.3V system can therefore power the transceiver directly, while a 5V design can also use the device within the stated upper supply limit.
How many RS-232 transmitters and receivers does MAX3243EETJ+T have?
The MAX3243EETJ+T provides three RS-232 transmitters and five RS-232 receivers. DigiKey describes the part as a 3/5 transceiver, and the product documentation identifies the MAX3243E as a multi-channel RS-232 interface. The transmitters support outbound serial connections, while the five receivers can monitor separate inbound signals such as status, acknowledgment, and equipment-control lines.
What is the maximum data rate of MAX3243EETJ+T?
The MAX3243EETJ+T supports data rates up to 250kbps. The manufacturer product page identifies the MAX3243E family as having high data-rate capability, and Mouser lists 250kbps for this exact ordering code. This rate is suitable for instrument-control links, configuration traffic, and industrial equipment interfaces where the cable length and termination arrangement remain within the RS-232 limits.
Does MAX3243EETJ+T have automatic shutdown and wakeup?
Yes. The MAX3243EETJ+T includes automatic shutdown and wakeup functions. According to the Analog Devices product page, the MAX3243E family is designed with automatic shutdown and wakeup features, allowing the interface to reduce activity when the link is idle and resume when communication is required. The exact shutdown-current value should be confirmed from the manufacturer datasheet for the selected operating mode.
What is the ESD protection rating of MAX3243EETJ+T?
The MAX3243EETJ+T is rated for 15kV ESD protection on the RS-232 interface lines, as stated in the Mouser product listing. The Analog Devices family page describes enhanced electrostatic-discharge protection. ESD protection improves transient immunity, but it does not eliminate the need for a correctly designed ground reference, controlled cable routing, and appropriate external surge protection in long industrial cables.
Where can I download the MAX3243EETJ+T datasheet?
The official MAX3243E product page is the primary starting point for the datasheet and technical documentation: https://www.analog.com/en/products/max3243e.html. It covers the MAX3243E family, electrical characteristics, pin descriptions, and typical applications. Use the product page's document links for the current datasheet revision rather than relying on a distributor mirror, and verify the ordering-code suffix before releasing a design.
Where can I find the MAX3243EETJ+T pinout?
The MAX3243EETJ+T pin assignment is documented in the manufacturer datasheet under the pin-description table. The device uses a 32-pin TQFN package with an exposed pad, so the exposed pad is a thermal and electrical connection rather than an ordinary signal pin. Use the package drawing and pin table together when assigning PCB tracks, especially for the exposed-pad ground connection.
Can MAX3243EETJ+T replace a MAX3232 device?
The MAX3243EETJ+T is not a universal footprint replacement for a MAX3232 because the channel count, package, and pin assignments differ. The MAX3232 family is a dual-driver, dual-receiver RS-232 transceiver, while the MAX3243EETJ+T offers three drivers and five receivers in a 32-pin TQFN. Use a MAX3232 part only when its exact package and pinout match the existing PCB.
What is the best MAX3243EETJ+T replacement for an obsolete board?
The best replacement is the variant with the same package, channel count, supply range, and RS-232 electrical characteristics as the original board. MAX3243EETJ+T and MAX3243EEAI+ are identified in cross-reference data as MAX3243E-family alternatives, but package and ordering-code details must be checked before substitution. For a direct board-level retrofit, verify every pin against the manufacturer datasheet rather than relying only on the family name.
Is MAX3243EETJ+T suitable for industrial equipment?
The MAX3243EETJ+T is suitable for industrial and instrumentation interfaces when the board is designed for the device's electrical and environmental limits. Its 3.0V to 5.5V supply range, 15kV ESD protection, 250kbps capability, and exposed-pad TQFN package support compact embedded and control designs. For harsh industrial environments, also verify operating temperature, isolation strategy, surge protection, and cable grounding requirements.
How do I calculate the power budget for MAX3243EETJ+T?
Estimated: multiply the actual supply voltage by the measured or datasheet-current operating condition to estimate device dissipation. For example, at 3.3V and 1mA, the estimated input power is 3.3mW; at 3.3V and 10mA, it is 33mW. Actual dissipation also depends on output loading, shutdown state, and the exposed-pad copper path, so use the manufacturer thermal data for the final design.
What is the difference between full-duplex and half-duplex RS-232 operation?
Full-duplex operation allows the transmitter and receiver to communicate simultaneously, while half-duplex operation shares a single channel direction. The MAX3243EETJ+T is described as a full-duplex RS-232 transceiver, with dedicated transmit and receive channels. The distinction is a system-level protocol decision as well as an electrical capability, and the selected channel count must match the connector and firmware design.
Where to buy MAX3243EETJ+T and what is its lead time?
Use the Request a Quote form on this page to request current availability, lead time, and a formal quotation for MAX3243EETJ+T. The manufacturer product page confirms that the MAX3243E is an active family, while distributor listings provide current sourcing information. Request the exact ordering code, package marking, and delivery quantity when submitting the inquiry.
What is the key specification of MAX3243EETJ+T for an engineer?
The key specification set is 3/5 RS-232 channels, a 3.0V to 5.5V supply, operation up to 250kbps, and 15kV ESD protection in a 32-pin TQFN package with an exposed pad. The MAX3243EETJ+T also provides automatic shutdown and wakeup. These features make it a fit for compact multi-port RS-232 control and data-acquisition systems where interface density and transient protection are priorities.

के लिए इंजीनियरिंग संदर्भ डेटा MAX3243EETJ+T — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MAX3243EETJ+T when the design needs three RS-232 transmit channels and five receive channels, operates from 3.0V to 5.5V, and benefits from automatic shutdown and wakeup. It is a strong fit for industrial instrumentation, test equipment, service consoles, and multi-peripheral systems where connector density matters. Choose MAX3232ECDR or MAX3232IPWR when only two drivers and two receivers are required and the board footprint favors those packages. Choose MAX232EIDR or MAX232EIPWR for point-to-point links with one transmitter and one receiver. For any family-member substitution, verify the exact package drawing, exposed-pad connection, pin names, temperature grade, and ordering-code suffix before committing the part to a new PCB.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX3243EEAI+ MAX3243EEWI+T MAX3243EETJ+ MAX3243EETJ
Package 32-pin TQFN, 7 mm x 7 mm 32-pin TQFN 32-pin TQFN 32-pin TQFN 32-pin TQFN
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Transmitter Count 3 3 3 3 3
Receiver Count 5 5 5 5 5
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps 250 kbps
ESD Protection 15 kV 15 kV 15 kV 15 kV 15 kV
Auto-Shutdown and Wakeup Yes Yes Yes Yes Yes
Duplex Operation Full duplex Full duplex Full duplex Full duplex Full duplex

मुख्य विशेषताएँ

  • Higher channel count than standard single- or dual-channel RS-232 transceivers (बनामMAX3232ECDR)
  • Automatic power management for intermittently used serial ports (बनामMAX232EIDR)
  • Compact exposed-pad TQFN implementation with multi-channel capability (बनामMAX3232IPWR)

डिज़ाइन नोट्स

Place the MAX3243EETJ+T supply bypass capacitors immediately adjacent to the VCC and GND pins, and connect the exposed pad to a solid ground plane with multiple thermal vias. The exposed pad is part of the package's thermal path and should not be left unconnected. Keep the ground reference continuous beneath the device so that transmitter return current does not share a noisy path with the receiver ground.

Do not substitute the MAX3243EETJ+T for a MAX3232 or MAX232 solely because both are RS-232 transceivers. The channel counts, pin assignments, package dimensions, and exposed-pad arrangements differ. For every alternative in the family, compare the ordering-code suffix, package drawing, pin-description table, and supply pins before releasing a substitute into production.

Route RS-232 connector traces away from switching nodes, clocks, and high-current return paths. Keep the connector-side ground connection short and provide chassis or surge protection when cables leave the enclosure. Although the interface has 15kV ESD protection, that rating does not replace a robust enclosure, cable design, or correctly selected external protection network.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The MAX3243E family is listed as active by the manufacturer, but the retrieved manufacturer and distributor information does not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. Verify the current compliance declarations on the manufacturer product page or the relevant declaration documents.

डेटा सत्यापन तिथि: 2026-11-17 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX3243EETJ+T datasheet MAX3243EETJ+T pinout MAX3243EETJ+T replacement MAX3243EETJ+T equivalent MAX3243EETJ+T price MAX3243EETJ+T RS-232 transceiver Analog Devices MAX3243EETJ+T MAX3243EETJ+T TQFN-32 MAX3243EETJ+T 250kbps MAX3243EETJ+T industrial RS-232 MAX3243EETJ+T cross reference MAX3243EETJ+T automatic shutdown MAX3243EETJ+T 15kV ESD MAX3243EETJ+T vs MAX3232ECDR where to buy MAX3243EETJ+T

संबंधित कंपोनेंट्स और शब्द

Analog Devices Maxim Integrated MAX3243EETJ+T MAX3243E MAX3243EEAI+ MAX3243EEWI+T MAX3232ECDR MAX3232IPWR MAX232EIDR MAX232EIPWR RS-232 EIA/TIA-232 RS-232 transceiver interface IC 3/5 transceiver automatic shutdown automatic wakeup 15 kV ESD protection 250 kbps 32-pin TQFN exposed pad surface mount industrial control test and measurement
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें