MAX3243EETJ+T - 3/5 RS-232 Transceiver, 250kbps | Analog Devices
MPN: MAX3243EETJ+T ✓ Hoạt độngMAX3243EETJ+T Tóm tắt
An RS-232 transceiver is a signal-interface integrated circuit that converts between single-ended, bipolar RS-232 logic levels and CMOS/TTL logic levels used by microcontrollers, computers, and industrial controllers. The MAX3243E family belongs to the interface IC hierarchy: RS-232 transceiver, communications interface, and interface integrated circuit. It provides level translation, noise immunity, and electrical protection in one compact package.
The MAX3243EETJ+T is specified for a 3.0V to 5.5V supply range, 15kV ESD protection on the RS-232 lines, and operation at rates up to 250kbps. Its three transmitters support point-to-point serial links, while its five receivers can monitor multiple incoming signals. Automatic shutdown reduces supply current when no active transmission is present, and the wakeup circuitry allows the interface to react to incoming serial activity.
Typical uses include industrial control equipment, data acquisition systems, test and measurement instruments, service interfaces, and embedded products that communicate through legacy RS-232 ports. The exposed pad improves heat flow from the package to the PCB, but a proper thermal via and copper-pour layout remain necessary for reliable operation in elevated-temperature environments.
When designing a board around this transceiver, route each RS-232 connector pin directly to the corresponding protection-capable interface pin and keep the ground return path close to the signal traces. Decoupling capacitors should be placed at the supply pins, and the exposed pad should be connected to the ground plane using multiple thermal vias. Review the manufacturer datasheet for the complete pin-description table and application circuit before assigning PCB tracks.
This page combines manufacturer specifications, distributor package information, replacement analysis, and practical PCB guidance to help engineers evaluate the MAX3243EETJ+T for new RS-232 designs and for retrofit work where the original interface device is no longer readily available.
Bộ thay thế dễ dàng lắp đặt cho MAX3243EETJ+T — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MAX3243EETJ+T (cùng hình factor và footprint) — khác nhau ở ESD Protection, Package, Maximum Data Rate, Supply Voltage Range, Receiver Channels.
MAX3243EEAI+
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EEWI+T
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EETJ+
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MAX3243EETJ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MAX3243EETJ+T Thông số kỹ thuật
| Loại giao diện | RS-232 transceiver |
| Number of Transmitters | 3 |
| Number of Receivers | 5 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | 15 kV |
| Điện áp cung cấp | 1 A maximum |
| Auto-Shutdown | Yes |
| Auto-Wakeup | Yes |
| Duplex Operation | Full duplex |
| Hộp | 32-pin TQFN, 7 mm x 7 mm |
| Exposed Pad | Yes |
| Kiểu lắp đặt | Surface mount |
Hướng dẫn cấu hình chân MAX3243EETJ+T 32-pin tqfn, 7 mm x 7 mm
Cấu hình chân cho MAX3243EETJ+T (32-pin tqfn, 7 mm x 7 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho MAX3243EETJ+T.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MAX3243EETJ+T phù hợp cho 6 Áp dụngs: Industrial Instrument Control, Data Acquisition Systems, Embedded Console and Service Ports, Point-of-Sale and Peripherals, Test and Measurement Equipment, Medical and Laboratory Equipment.
Industrial Instrument Control
The MAX3243EETJ+T is appropriate for RS-232 control ports in industrial test equipment, analyzers, and programmable instruments. Its three transmitters and five receivers provide enough channels for command, data, status, and handshake lines without adding multiple interface packages. The 250kbps rate suits short-distance instrument protocols, while the 15kV ESD protection adds transient resilience at connector-facing pins. Use the exposed pad as a ground and thermal connection, and verify the operating temperature range for the enclosure.
Được đề xuất
Data Acquisition Systems
Use the MAX3243EETJ+T to bridge a controller or embedded processor to multiple RS-232 peripherals in a data-acquisition system. The three transmit channels can support separate command paths, while the five receive channels can collect responses from sensors, fixtures, or auxiliary equipment. Its 3.0V to 5.5V supply range allows integration with both 3.3V and 5V digital systems. Keep the transceiver supply decoupling close to the device and provide a low-impedance ground return beneath the exposed pad.
Được đề xuất
Embedded Console and Service Ports
The MAX3243EETJ+T fits service and maintenance ports that must remain accessible while the main product is running. A dedicated receiver can monitor a remote-control input, and the additional transmit channels can support status reporting or equipment control. Automatic shutdown and wakeup help conserve power in portable or intermittently connected systems. Confirm that the system-level protocol supports the chosen baud rate and that the connector shield or chassis ground is handled according to the enclosure design.
Được đề xuất
Point-of-Sale and Peripherals
The MAX3243EETJ+T can support compact peripheral subsystems that use multiple RS-232 links, including printers, scanners, readers, or specialty equipment. The 3/5 channel arrangement allows a single package to handle several unidirectional or handshake-controlled connections. The 250kbps maximum data rate supports many legacy peripheral protocols, but cable length, baud rate, and grounding determine practical link reliability. Use the family information and data sheets for each peripheral before assigning the transmit and receive pins.
Được đề xuất
Test and Measurement Equipment
The MAX3243EETJ+T is useful in test and measurement equipment that requires several RS-232 control or status lines in a compact board area. Its exposed-pad TQFN package reduces footprint compared with larger SOIC-style implementations and promotes heat transfer into the PCB. The 15kV ESD rating helps protect interface pins during routine cable connection and disconnection. Validate signal integrity with the actual cable, connector, and grounding arrangement because RS-232 margin depends on the complete channel.
Được đề xuất
Medical and Laboratory Equipment
The MAX3243EETJ+T can serve as the RS-232 interface in laboratory instruments and medical equipment that expose a legacy service or configuration port. Its multiple receivers allow the host to monitor readiness, alarm, and status lines in addition to the main command channel. Automatic shutdown reduces standby consumption when the port is idle. For medical deployments, confirm the complete device operating-temperature and qualification requirements, and add the isolation and protection required by the applicable system architecture.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MAX3243EETJ+T — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MAX3243EEAI+ | MAX3243EEWI+T | MAX3243EETJ+ | MAX3243EETJ |
|---|---|---|---|---|---|
| Package | 32-pin TQFN, 7 mm x 7 mm | 32-pin TQFN | 32-pin TQFN | 32-pin TQFN | 32-pin TQFN |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Transmitter Count | 3 | 3 | 3 | 3 | 3 |
| Receiver Count | 5 | 5 | 5 | 5 | 5 |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV |
| Auto-Shutdown and Wakeup | Yes | Yes | Yes | Yes | Yes |
| Duplex Operation | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex |
Bảo phân biệt quan trọng
- Higher channel count than standard single- or dual-channel RS-232 transceivers (vsMAX3232ECDR)
- Automatic power management for intermittently used serial ports (vsMAX232EIDR)
- Compact exposed-pad TQFN implementation with multi-channel capability (vsMAX3232IPWR)
Ghi chú thiết kế
Place the MAX3243EETJ+T supply bypass capacitors immediately adjacent to the VCC and GND pins, and connect the exposed pad to a solid ground plane with multiple thermal vias. The exposed pad is part of the package's thermal path and should not be left unconnected. Keep the ground reference continuous beneath the device so that transmitter return current does not share a noisy path with the receiver ground.
Do not substitute the MAX3243EETJ+T for a MAX3232 or MAX232 solely because both are RS-232 transceivers. The channel counts, pin assignments, package dimensions, and exposed-pad arrangements differ. For every alternative in the family, compare the ordering-code suffix, package drawing, pin-description table, and supply pins before releasing a substitute into production.
Route RS-232 connector traces away from switching nodes, clocks, and high-current return paths. Keep the connector-side ground connection short and provide chassis or surge protection when cables leave the enclosure. Although the interface has 15kV ESD protection, that rating does not replace a robust enclosure, cable design, or correctly selected external protection network.
Thông tin tuân thủ
The MAX3243E family is listed as active by the manufacturer, but the retrieved manufacturer and distributor information does not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. Verify the current compliance declarations on the manufacturer product page or the relevant declaration documents.