MAX3243EETJ+T - 3/5 RS-232 Transceiver, 250kbps | Analog Devices
MPN: MAX3243EETJ+T ✓ 啟用中MAX3243EETJ+T 概覽
An RS-232 transceiver is a signal-interface integrated circuit that converts between single-ended, bipolar RS-232 logic levels and CMOS/TTL logic levels used by microcontrollers, computers, and industrial controllers. The MAX3243E family belongs to the interface IC hierarchy: RS-232 transceiver, communications interface, and interface integrated circuit. It provides level translation, noise immunity, and electrical protection in one compact package.
The MAX3243EETJ+T is specified for a 3.0V to 5.5V supply range, 15kV ESD protection on the RS-232 lines, and operation at rates up to 250kbps. Its three transmitters support point-to-point serial links, while its five receivers can monitor multiple incoming signals. Automatic shutdown reduces supply current when no active transmission is present, and the wakeup circuitry allows the interface to react to incoming serial activity.
Typical uses include industrial control equipment, data acquisition systems, test and measurement instruments, service interfaces, and embedded products that communicate through legacy RS-232 ports. The exposed pad improves heat flow from the package to the PCB, but a proper thermal via and copper-pour layout remain necessary for reliable operation in elevated-temperature environments.
When designing a board around this transceiver, route each RS-232 connector pin directly to the corresponding protection-capable interface pin and keep the ground return path close to the signal traces. Decoupling capacitors should be placed at the supply pins, and the exposed pad should be connected to the ground plane using multiple thermal vias. Review the manufacturer datasheet for the complete pin-description table and application circuit before assigning PCB tracks.
This page combines manufacturer specifications, distributor package information, replacement analysis, and practical PCB guidance to help engineers evaluate the MAX3243EETJ+T for new RS-232 designs and for retrofit work where the original interface device is no longer readily available.
直接替換替代品,適用於 MAX3243EETJ+T — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: MAX3243EETJ+T (相同外形與佔位) — 差異在於 ESD Protection, Package, Maximum Data Rate, Supply Voltage Range, Receiver Channels.
MAX3243EEAI+
✅ 直接替換聯絡詢價
查看資料表 →MAX3243EEWI+T
✅ 直接替換聯絡詢價
查看資料表 →MAX3243EETJ+
✅ 直接替換聯絡詢價
查看資料表 →MAX3243EETJ
✅ 直接替換📋 參考替代品(不在目錄中)
MAX3243EETJ+T 規格
| 介面類型 | RS-232 transceiver |
| Number of Transmitters | 3 |
| Number of Receivers | 5 |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | 15 kV |
| 供應電流 | 1 A maximum |
| Auto-Shutdown | Yes |
| Auto-Wakeup | Yes |
| Duplex Operation | Full duplex |
| 封裝 | 32-pin TQFN, 7 mm x 7 mm |
| Exposed Pad | Yes |
| 安裝類型 | Surface mount |
MAX3243EETJ+T 32-pin tqfn, 7 mm x 7 mm 腳位配置指南
MAX3243EETJ+T(32-pin tqfn, 7 mm x 7 mm 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: MAX3243EETJ+T.
請參閱 資料表 以查看完整腳位配置。
典型應用
MAX3243EETJ+T 適用於 6 應用s: Industrial Instrument Control, Data Acquisition Systems, Embedded Console and Service Ports, Point-of-Sale and Peripherals, Test and Measurement Equipment, Medical and Laboratory Equipment.
Industrial Instrument Control
The MAX3243EETJ+T is appropriate for RS-232 control ports in industrial test equipment, analyzers, and programmable instruments. Its three transmitters and five receivers provide enough channels for command, data, status, and handshake lines without adding multiple interface packages. The 250kbps rate suits short-distance instrument protocols, while the 15kV ESD protection adds transient resilience at connector-facing pins. Use the exposed pad as a ground and thermal connection, and verify the operating temperature range for the enclosure.
推薦
Data Acquisition Systems
Use the MAX3243EETJ+T to bridge a controller or embedded processor to multiple RS-232 peripherals in a data-acquisition system. The three transmit channels can support separate command paths, while the five receive channels can collect responses from sensors, fixtures, or auxiliary equipment. Its 3.0V to 5.5V supply range allows integration with both 3.3V and 5V digital systems. Keep the transceiver supply decoupling close to the device and provide a low-impedance ground return beneath the exposed pad.
推薦
Embedded Console and Service Ports
The MAX3243EETJ+T fits service and maintenance ports that must remain accessible while the main product is running. A dedicated receiver can monitor a remote-control input, and the additional transmit channels can support status reporting or equipment control. Automatic shutdown and wakeup help conserve power in portable or intermittently connected systems. Confirm that the system-level protocol supports the chosen baud rate and that the connector shield or chassis ground is handled according to the enclosure design.
推薦
Point-of-Sale and Peripherals
The MAX3243EETJ+T can support compact peripheral subsystems that use multiple RS-232 links, including printers, scanners, readers, or specialty equipment. The 3/5 channel arrangement allows a single package to handle several unidirectional or handshake-controlled connections. The 250kbps maximum data rate supports many legacy peripheral protocols, but cable length, baud rate, and grounding determine practical link reliability. Use the family information and data sheets for each peripheral before assigning the transmit and receive pins.
推薦
Test and Measurement Equipment
The MAX3243EETJ+T is useful in test and measurement equipment that requires several RS-232 control or status lines in a compact board area. Its exposed-pad TQFN package reduces footprint compared with larger SOIC-style implementations and promotes heat transfer into the PCB. The 15kV ESD rating helps protect interface pins during routine cable connection and disconnection. Validate signal integrity with the actual cable, connector, and grounding arrangement because RS-232 margin depends on the complete channel.
推薦
Medical and Laboratory Equipment
The MAX3243EETJ+T can serve as the RS-232 interface in laboratory instruments and medical equipment that expose a legacy service or configuration port. Its multiple receivers allow the host to monitor readiness, alarm, and status lines in addition to the main command channel. Automatic shutdown reduces standby consumption when the port is idle. For medical deployments, confirm the complete device operating-temperature and qualification requirements, and add the isolation and protection required by the applicable system architecture.
推薦
推薦產品摘要
工程參考資料,適用於 MAX3243EETJ+T — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | MAX3243EEAI+ | MAX3243EEWI+T | MAX3243EETJ+ | MAX3243EETJ |
|---|---|---|---|---|---|
| Package | 32-pin TQFN, 7 mm x 7 mm | 32-pin TQFN | 32-pin TQFN | 32-pin TQFN | 32-pin TQFN |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Transmitter Count | 3 | 3 | 3 | 3 | 3 |
| Receiver Count | 5 | 5 | 5 | 5 | 5 |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | 15 kV | 15 kV | 15 kV | 15 kV | 15 kV |
| Auto-Shutdown and Wakeup | Yes | Yes | Yes | Yes | Yes |
| Duplex Operation | Full duplex | Full duplex | Full duplex | Full duplex | Full duplex |
主要差異化特點
- Higher channel count than standard single- or dual-channel RS-232 transceivers (對比MAX3232ECDR)
- Automatic power management for intermittently used serial ports (對比MAX232EIDR)
- Compact exposed-pad TQFN implementation with multi-channel capability (對比MAX3232IPWR)
設計說明
Place the MAX3243EETJ+T supply bypass capacitors immediately adjacent to the VCC and GND pins, and connect the exposed pad to a solid ground plane with multiple thermal vias. The exposed pad is part of the package's thermal path and should not be left unconnected. Keep the ground reference continuous beneath the device so that transmitter return current does not share a noisy path with the receiver ground.
Do not substitute the MAX3243EETJ+T for a MAX3232 or MAX232 solely because both are RS-232 transceivers. The channel counts, pin assignments, package dimensions, and exposed-pad arrangements differ. For every alternative in the family, compare the ordering-code suffix, package drawing, pin-description table, and supply pins before releasing a substitute into production.
Route RS-232 connector traces away from switching nodes, clocks, and high-current return paths. Keep the connector-side ground connection short and provide chassis or surge protection when cables leave the enclosure. Although the interface has 15kV ESD protection, that rating does not replace a robust enclosure, cable design, or correctly selected external protection network.
合規資訊
The MAX3243E family is listed as active by the manufacturer, but the retrieved manufacturer and distributor information does not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status. Verify the current compliance declarations on the manufacturer product page or the relevant declaration documents.